Novel hybrid silica membranes for desalination. This project aims to produce high flux, highly stable ceramic membranes for use in desalination. This will result in novel, low energy desalination processes, delivering potable water at a greatly reduced cost.
Improving road network operations under non-recurrent events. This project aims to develop an innovative approach for improving Road Network Operations (RNO) under non-recurrent events through analysis of big data and images. The outcomes of this project can not only improve the mobility of people, but also provide improved safety outcomes for all users of the transport network. It will help optimise traffic control strategies and traffic designs, reduce the maintenance cost for road infrastruc ....Improving road network operations under non-recurrent events. This project aims to develop an innovative approach for improving Road Network Operations (RNO) under non-recurrent events through analysis of big data and images. The outcomes of this project can not only improve the mobility of people, but also provide improved safety outcomes for all users of the transport network. It will help optimise traffic control strategies and traffic designs, reduce the maintenance cost for road infrastructure and improve quality of life.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE150101687
Funder
Australian Research Council
Funding Amount
$340,000.00
Summary
Nanostructure Tailoring of Inorganic Membranes by Rapid Thermal Processing. This project aims to produce inorganic membranes with desired nanostructures using a Rapid Thermal Processing (RTP) technique for gas separation applications. The key concept of the research is that the RTP will be able to achieve thin-film membrane layer with a finer microstructure and pore size control without heat stress-induced cracking. RTP aims to deliver superior membrane performance with less than 10 per cent of ....Nanostructure Tailoring of Inorganic Membranes by Rapid Thermal Processing. This project aims to produce inorganic membranes with desired nanostructures using a Rapid Thermal Processing (RTP) technique for gas separation applications. The key concept of the research is that the RTP will be able to achieve thin-film membrane layer with a finer microstructure and pore size control without heat stress-induced cracking. RTP aims to deliver superior membrane performance with less than 10 per cent of the fabrication time compared to normal slow calcination. The outcomes of this new technology aims to make inorganic membranes a commercial reality and maximize the membrane manufacturing capability and productivity of petrochemcial, chemical and clean coal/energy industries.Read moreRead less
Biosolid flow, separation and activity in anaerobic lagoons. This project aims to develop a fundamental model of the complex, non-steady state flow behaviour in anaerobic lagoons. The project will develop new operating procedures and designs for large municipal, industrial and agricultural anaerobic lagoons. This will improve the efficiency of anaerobic digestion and reduce wastewater treatment costs, as well as increase renewable and sustainable biogas production. The intended outcome is a va ....Biosolid flow, separation and activity in anaerobic lagoons. This project aims to develop a fundamental model of the complex, non-steady state flow behaviour in anaerobic lagoons. The project will develop new operating procedures and designs for large municipal, industrial and agricultural anaerobic lagoons. This will improve the efficiency of anaerobic digestion and reduce wastewater treatment costs, as well as increase renewable and sustainable biogas production. The intended outcome is a validated 3D model that captures the physical and biological complexities of anaerobic lagoons. This will impact the design and operation of partner organisation lagoons, reducing capital and operating costs and improving biogas production.Read moreRead less
Efficient Pipeline Transport of Highly Concentrated Wastewater Sludge . This project aims to investigate the rheology and fluid mechanics of highly concentrated wastewater sludges and develop tools to support effective pipeline designs for wastewater treatment plants. The project expects to generate new knowledge about the complex flow of concentrated wastewater which will enable predictive models to support the design and optimization of pipeline transport systems. Expected outcomes of the proj ....Efficient Pipeline Transport of Highly Concentrated Wastewater Sludge . This project aims to investigate the rheology and fluid mechanics of highly concentrated wastewater sludges and develop tools to support effective pipeline designs for wastewater treatment plants. The project expects to generate new knowledge about the complex flow of concentrated wastewater which will enable predictive models to support the design and optimization of pipeline transport systems. Expected outcomes of the project include a new toolkit that will enable wastewater treatment plants to design and optimize both existing and future pipeline systems. This will support the Australian wastewater industry to plan for future growth, increase throughput and efficiency, reduce environmental pollutants, and capital and operating costs.Read moreRead less
Low-cost, Lightweight and Liquid Helium-free Superconducting MRI Magnet. This project aims to develop a liquid-helium-free superconducting technology to address the need for more affordable MRI magnets that currently rely on expensive, limited supplies of liquid helium. This project expects to generate a world-first, much needed MRI systems to be operated in persistent mode without a power supply, to obtain high-resolution images and low-cost operation. The expected outcomes include a novel, lig ....Low-cost, Lightweight and Liquid Helium-free Superconducting MRI Magnet. This project aims to develop a liquid-helium-free superconducting technology to address the need for more affordable MRI magnets that currently rely on expensive, limited supplies of liquid helium. This project expects to generate a world-first, much needed MRI systems to be operated in persistent mode without a power supply, to obtain high-resolution images and low-cost operation. The expected outcomes include a novel, lightweight, easy-to-operate magnesium diboride superconducting MRI magnet prototype under persistent mode operation. This should provide significant benefits, including reducing the cost associated with conventional liquid helium-dependent technologies and ensuring Australia at the forefront of MRI development worldwide.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE170100694
Funder
Australian Research Council
Funding Amount
$360,000.00
Summary
Building resilience in wastewater infrastructure with self-healing bioconcrete. This project aims to develop a microbial self-healing bio-concrete to extend the service life of wastewater collection and treatment facilities. Water utilities worldwide struggle with asset management, because global warming and extreme weather age and corrode concrete infrastructure. This project will use microbially-induced calcium carbonate precipitation by bacteria to treat wastewater. The bacteria, added to bio ....Building resilience in wastewater infrastructure with self-healing bioconcrete. This project aims to develop a microbial self-healing bio-concrete to extend the service life of wastewater collection and treatment facilities. Water utilities worldwide struggle with asset management, because global warming and extreme weather age and corrode concrete infrastructure. This project will use microbially-induced calcium carbonate precipitation by bacteria to treat wastewater. The bacteria, added to bio-concrete, can fill cracks or reseal corroded areas by using organic substrates from wastewater to generate concrete, thus maintaining structural strength and preventing further damage. This project is expected to enhance the resilience and sustainability of wastewater infrastructure in ever more demanding environments.Read moreRead less
Interface structures mediating load transfer between soft and hard tissues. This project aims to develop a novel technology platform to mediate load transfer between synthetic and biological materials with dissimilar mechanical properties, creating an effective interface mechanism. It will generate new knowledge in materials engineering by combining interdisciplinary expertise and state-of-the-art technologies in computational modelling, biomaterials, and additive manufacturing. Expected outcome ....Interface structures mediating load transfer between soft and hard tissues. This project aims to develop a novel technology platform to mediate load transfer between synthetic and biological materials with dissimilar mechanical properties, creating an effective interface mechanism. It will generate new knowledge in materials engineering by combining interdisciplinary expertise and state-of-the-art technologies in computational modelling, biomaterials, and additive manufacturing. Expected outcomes are high-tech ceramic structures optimized to interface effectively between synthetic soft tissues and natural hard tissues. This could ultimately benefit Australian industry engaged in developing next-generation synthetic orthopaedic solutions, providing a significant competitive advantage in an expanding global market.Read moreRead less
Towards use-as-manufactured titanium alloys for additive manufacturing. Australian manufacturers of 3D printed titanium products face grand challenges in affordably producing useable and reliable as-printed products because the 3D printing process may create unfavourable material characteristics. To ensure products meet acceptance criteria, manufacturers usually apply expensive and time-consuming post processes such as heat treatment. This project aims to discover how alloy composition can be mo ....Towards use-as-manufactured titanium alloys for additive manufacturing. Australian manufacturers of 3D printed titanium products face grand challenges in affordably producing useable and reliable as-printed products because the 3D printing process may create unfavourable material characteristics. To ensure products meet acceptance criteria, manufacturers usually apply expensive and time-consuming post processes such as heat treatment. This project aims to discover how alloy composition can be modified to produce more favourable material characteristics directly from 3D printing, preventing the need for post processing. Australian manufacturers will likely benefit through a streamlined manufacturing process resulting in increased profitability in existing markets as well as expansion into new global markets.Read moreRead less
Transforming titanium component fabrication with free machining additives. Australian manufacturers of titanium products face grand challenges in affordably machining precision components because titanium is expensive, inherently difficult to machine and most designed parts require significant machining, all of which exacerbates cost. This project aims to overcome these impediments by discovering new alloy additives that can be introduced locally during additive manufacturing of titanium product ....Transforming titanium component fabrication with free machining additives. Australian manufacturers of titanium products face grand challenges in affordably machining precision components because titanium is expensive, inherently difficult to machine and most designed parts require significant machining, all of which exacerbates cost. This project aims to overcome these impediments by discovering new alloy additives that can be introduced locally during additive manufacturing of titanium products in order to make machining operations easier and faster without affecting the quality of the final product. The knowledge gained from this project seeks to create new capabilities and improve the productivity of Australian manufacturers while lowering the cost of products for consumers.Read moreRead less