Increasing solid electrolyte conductivity through defect design. This project aims to engineer electrolyte materials, based on organic ionic plastic crystals, and use isomeric doping to improve the ionic conductivity. The development of safer batteries relies on eliminating the volatile and flammable solvents commonly used as the electrolyte. Improving the safety and performance of batteries is important as electricity costs increase. Solid state ionic electrolytes can address leakage and volati ....Increasing solid electrolyte conductivity through defect design. This project aims to engineer electrolyte materials, based on organic ionic plastic crystals, and use isomeric doping to improve the ionic conductivity. The development of safer batteries relies on eliminating the volatile and flammable solvents commonly used as the electrolyte. Improving the safety and performance of batteries is important as electricity costs increase. Solid state ionic electrolytes can address leakage and volatility problems, but the conductivity must be improved if these materials are to support high battery power. The project’s electrolyte materials can be used in lithium metal batteries, which have higher theoretical energy densities than traditional lithium ion batteries. This project will develop new solid state electrolytes, with improved conductivity, and use these materials in emerging lithium battery technologies.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE170100235
Funder
Australian Research Council
Funding Amount
$388,000.00
Summary
Spectroscopy and imaging platform for photoactive materials. This project aims to establish a comprehensive analytic tool-box to characterise solution-processable materials for thin-film solar cells based on materials such as perovskites. These materials have light harvesting properties with absorption edges beyond 800 nm. This project will focus on time-resolved transient absorption and microwave conductivity phenomena and on lock-in thermographic imaging capabilities. This will accelerate mate ....Spectroscopy and imaging platform for photoactive materials. This project aims to establish a comprehensive analytic tool-box to characterise solution-processable materials for thin-film solar cells based on materials such as perovskites. These materials have light harvesting properties with absorption edges beyond 800 nm. This project will focus on time-resolved transient absorption and microwave conductivity phenomena and on lock-in thermographic imaging capabilities. This will accelerate materials and technological development in this research field. This project is expected to help the local and global energy sector transition to sustainable energy, provide a competitive edge for commercialisations of solar technologies in Australia, and benefit the economy, environment and national security.Read moreRead less
Carbon nanotube fluidic channels for desalination - interplay of nanoscale confinement and electrostatics. Tiny tubes of carbon, ten thousand times smaller than human hair, allow water to pass through at extraordinary speed. This project aims to understand and improve their salt rejection properties using comprehensive experimental and theoretical approaches. This will provide the impetus and knowledge for developing advanced membranes for desalination
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE170100072
Funder
Australian Research Council
Funding Amount
$600,000.00
Summary
Facility for exploring light-matter interactions in space, time and energy. This project aims to create a readily accessible facility consisting of a suite of tools to study light-matter interactions in materials, molecules and biological systems. Understanding light-matter interactions offers insight into the properties of nano- and biomaterials. The project intends to combine local probes and pump-probe spectroscopy methods for studying nanoscale femtosecond dynamics. It will be accessible to ....Facility for exploring light-matter interactions in space, time and energy. This project aims to create a readily accessible facility consisting of a suite of tools to study light-matter interactions in materials, molecules and biological systems. Understanding light-matter interactions offers insight into the properties of nano- and biomaterials. The project intends to combine local probes and pump-probe spectroscopy methods for studying nanoscale femtosecond dynamics. It will be accessible to a broad user base, cementing Australia’s leadership in ultrafast spectroscopy techniques and nano/bio-materials. The facility will provide a window to the quantum nanoworld, with potential for developing new energy efficient light sources, light-harvesting systems and sensors.Read moreRead less
Vapour phase detection of chemical warfare agents. This project aims to create luminescent plastic optoelectronic materials that can detect airborne chemical warfare agents, particularly nerve agents. Such agents are often odourless and invisible at lethal concentrations, so technology must detect and identify them before exposure. The intended outcomes are design rules for sensitive and selective materials that can be used in a handheld infield detector to sense chemical warfare agents based on ....Vapour phase detection of chemical warfare agents. This project aims to create luminescent plastic optoelectronic materials that can detect airborne chemical warfare agents, particularly nerve agents. Such agents are often odourless and invisible at lethal concentrations, so technology must detect and identify them before exposure. The intended outcomes are design rules for sensitive and selective materials that can be used in a handheld infield detector to sense chemical warfare agents based on the materials’ photophysical properties, and new analytical methods and sensing protocols. This research will be of interest to security agencies in Australia and internationally, and will better protect our military.Read moreRead less
Synthesis of novel phases from Group IV elements under extreme pressure. Materials based on the group IV elements carbon, silicon and germanium are technologically important for a wide range of current applications. When exposed to extreme pressure, these materials can form entirely new phases with novel and potentially useful properties. Since there have been few previous attempts to establish which of the new phases are stable on pressure release and to measure their properties for subsequent ....Synthesis of novel phases from Group IV elements under extreme pressure. Materials based on the group IV elements carbon, silicon and germanium are technologically important for a wide range of current applications. When exposed to extreme pressure, these materials can form entirely new phases with novel and potentially useful properties. Since there have been few previous attempts to establish which of the new phases are stable on pressure release and to measure their properties for subsequent exploitation, this project aims to use novel approaches to address these topics. The expected outcome of this project will be new phases of group IV elements with novel properties that have potential for commercial exploitation.Read moreRead less
Nanoporous siloxane membranes for ultrasound mediated ophthalmic drug delivery. This project will develop tailored polymers for use in a novel non-invasive ocular drug delivery device which treats vision threatening conditions such as age-related macular degeneration (AMD). The outcomes of this project will enable an entirely new ocular drug delivery technology, thereby delivering significant benefit to ophthalmic healthcare.
van der Waals epitaxy for advanced and flexible optoelectronics. This project aims to investigate the growth of compound semiconductors directly on two-dimensional material templates, via the so-called van der Waals epitaxy. Two-dimensional materials combined with compound semiconductors as optoelectronic materials can have many uses. This project expects to design flexible solar cells, which could be integrated with fabrics or building products, and lasers that need small drive currents. It wil ....van der Waals epitaxy for advanced and flexible optoelectronics. This project aims to investigate the growth of compound semiconductors directly on two-dimensional material templates, via the so-called van der Waals epitaxy. Two-dimensional materials combined with compound semiconductors as optoelectronic materials can have many uses. This project expects to design flexible solar cells, which could be integrated with fabrics or building products, and lasers that need small drive currents. It will use the Anderson localisation effect, a photon management concept, to control the interaction between photons and material and improve device efficiencies.Read moreRead less
Engineered ion channels for selective and switchable ion conduction. This project aims to develop an innovative bioinspired approach for fabricating angstrom-sized ion-channel membranes with specific ion selectivity, high ion conductivity and efficient gating function comparable to biological ion channels. Engineering of artificial channels with ion-channel-like shapes, ion selectivity filters and functional gates is expected to bring high-efficiency technologies to applications such as membrane ....Engineered ion channels for selective and switchable ion conduction. This project aims to develop an innovative bioinspired approach for fabricating angstrom-sized ion-channel membranes with specific ion selectivity, high ion conductivity and efficient gating function comparable to biological ion channels. Engineering of artificial channels with ion-channel-like shapes, ion selectivity filters and functional gates is expected to bring high-efficiency technologies to applications such as membrane separation and energy conversion. This project has potential to result in new knowledge of biomimetic design of artificial ion-channel membranes and directly benefit manufacturing industry for Australia.Read moreRead less
Porous transparent conducting oxides for efficient solar fuel production. This project aims to develop highly porous, transparent and electrically conducting networks of oxide nanoparticles for artificial photosynthesis applications. The majority of hydrogen is currently produced via natural gas reforming, a process that generates a significant carbon footprint due to the use of fossil fuels. This project will develop novel materials and fabrication methods to improve the efficiency of hydrogen ....Porous transparent conducting oxides for efficient solar fuel production. This project aims to develop highly porous, transparent and electrically conducting networks of oxide nanoparticles for artificial photosynthesis applications. The majority of hydrogen is currently produced via natural gas reforming, a process that generates a significant carbon footprint due to the use of fossil fuels. This project will develop novel materials and fabrication methods to improve the efficiency of hydrogen production using clean and renewable solar energy. This project will contribute to development of technologies for the chemical storage of renewable energy, and reduction of carbon dioxide emissions. This will have applications in the areas of optoelectronic devices, medical biosensors, and photocatalysis, offering downstream benefits for the society, the economy and the environment.Read moreRead less