A direct drive linear tube generator for ocean wave energy conversion. This project aims to investigate a direct drive linear electromagnetic generator system for the maximum wave energy conversion and frequency bandwidth. This system has a translator of a multiple degree of freedom non-linear oscillator system built with the Halbach ring array pattern and ferro-fluid bearings. To establish wave energy conversion science, this project will investigate the device, its integration with a buoy stru ....A direct drive linear tube generator for ocean wave energy conversion. This project aims to investigate a direct drive linear electromagnetic generator system for the maximum wave energy conversion and frequency bandwidth. This system has a translator of a multiple degree of freedom non-linear oscillator system built with the Halbach ring array pattern and ferro-fluid bearings. To establish wave energy conversion science, this project will investigate the device, its integration with a buoy structure under wave loadings and automatic control of power conversion and conditioning. The outcome could meet demands for wave energy conversion technologies that reduce power generation cost and emissions, benefiting the Australian economy and environment.Read moreRead less
Investigation into flow over complex topography and escarpments for wind turbine siting using experimental and computational methods. This project will improve national capability to optimise power production from wind turbine farms in complex terrain by improving the understanding of the flow regime. By better understanding separated regions and the turbulent structures within these regions power production can be optimised and fatigue risks associated with turbine positioning in complex sites ....Investigation into flow over complex topography and escarpments for wind turbine siting using experimental and computational methods. This project will improve national capability to optimise power production from wind turbine farms in complex terrain by improving the understanding of the flow regime. By better understanding separated regions and the turbulent structures within these regions power production can be optimised and fatigue risks associated with turbine positioning in complex sites can be reduced. This will improve confidence in wind farm site assessment techniques and consequently reduce economic risks associated with current wind farm viability assessments. By increasing national capacity to generate clean energy stationary energy emissions can be reduced. This project will also deliver high calibre graduates that will be potential future industry leaders.Read moreRead less
Green cool wine: solar powered solid adsorption refrigeration system with ice storage to provide cooling capability for wine industry. The project is to develop a solar thermal powered refrigeration system that is able to build up an ice bank (as a storage) through daily intermittent cycle, from late Australian spring. The ice bank will used in the vintage season in a winery for cooling purposes. The system is able to reduce the carbon foot print of the wineries significantly.
Enhanced Waste Heat Recovery from Low-grade Heat Sources Using a Novel Supercritical Power Cycle. Compared with conventional technologies for waste heat recovery, GRANEX cycle offers higher thermal efficiencies, better economics and a greater degree of robustness. If deployed ascross the country to recover even 10% of the nation's waste heat, it would reduce greenhouse emissions by 9 mega tonne which is roughly 1.6% of the annual national emissions. That is equivalent to the yearly CO2 emissions ....Enhanced Waste Heat Recovery from Low-grade Heat Sources Using a Novel Supercritical Power Cycle. Compared with conventional technologies for waste heat recovery, GRANEX cycle offers higher thermal efficiencies, better economics and a greater degree of robustness. If deployed ascross the country to recover even 10% of the nation's waste heat, it would reduce greenhouse emissions by 9 mega tonne which is roughly 1.6% of the annual national emissions. That is equivalent to the yearly CO2 emissions from 648,000 houses or 2 million cars. The proposed research will place Australia within the forefront of the research and development activities in the field of waste heat recovery and will clearly contribute to the Federal Government’s effort in the National Research Priority 1, An Environmentally Sustainable Australia.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE180101300
Funder
Australian Research Council
Funding Amount
$368,446.00
Summary
Probing interfacial impedance in all-solid-state lithium-ion batteries. This project aims to investigate the mechanism behind the high impedance at the interface between electrodes and the solid electrolyte in solid-state lithium-ion batteries using advanced in-situ transmission electron microscopy. The outcomes will deepen knowledge in chemical and structural evolution at the electrode–electrolyte interface during battery operation under different conditions, and thus inform the design and fabr ....Probing interfacial impedance in all-solid-state lithium-ion batteries. This project aims to investigate the mechanism behind the high impedance at the interface between electrodes and the solid electrolyte in solid-state lithium-ion batteries using advanced in-situ transmission electron microscopy. The outcomes will deepen knowledge in chemical and structural evolution at the electrode–electrolyte interface during battery operation under different conditions, and thus inform the design and fabrication of safe, high power, and long lasting solid-state batteries for a myriad of portable electronic devices and the emerging electric vehicles.Read moreRead less
Improved design and operational efficiency of small wind turbines in unsteady flows. The purpose of this research is to improve the design and performance of small wind turbines for energy generation. The expected outcomes are novel control strategies and mechanical designs that account for unsteady aerodynamics and its effects on structural loads and power quality. Recommendations to improve current design standards will be made.
Discovery Early Career Researcher Award - Grant ID: DE120102052
Funder
Australian Research Council
Funding Amount
$375,000.00
Summary
Resolving flame stabilisation mechanisms in the transition to moderate or intense low oxygen dilution (MILD) combustion. Next-generation combustion technologies are required in the transition to more efficient, and less polluting, energy production. This project will address the important issue of understanding flame stabilisation on a fundamental level to facilitate the design and development of more efficient and sustainable combustion systems.
An innovative wind power system primarily for urban environments. The project aims to develop a novel rotor vane array wind power system that can be used as a roof fence or balcony on existing or new buildings. Traditional wind turbines cannot fully realise the potential of excellent wind speed in tall buildings because of space efficiency, visual impact, and danger or noise issues. The system to be developed in the project incorporates advanced active flow control that addresses these issues. T ....An innovative wind power system primarily for urban environments. The project aims to develop a novel rotor vane array wind power system that can be used as a roof fence or balcony on existing or new buildings. Traditional wind turbines cannot fully realise the potential of excellent wind speed in tall buildings because of space efficiency, visual impact, and danger or noise issues. The system to be developed in the project incorporates advanced active flow control that addresses these issues. The project plans to conduct a structured program of numerical and experimental studies, the intended outcomes of which will contribute to energy security, progress towards zero emissions and sustainable living, and lead to innovative architecture of the future.Read moreRead less
Better predictions of spray flames. This project aims to predict spray flames using experimental and computational modelling of the combustion near burning droplets in spray flames. Spray flames are the dominant source of energy for the transportation sector, and are expected to remain so well into the future. Limited understanding of combustion processes surrounding the burning of the droplets restricts further technological development. This project is expected to enable progress in design too ....Better predictions of spray flames. This project aims to predict spray flames using experimental and computational modelling of the combustion near burning droplets in spray flames. Spray flames are the dominant source of energy for the transportation sector, and are expected to remain so well into the future. Limited understanding of combustion processes surrounding the burning of the droplets restricts further technological development. This project is expected to enable progress in design tools for spray flame combustors operating on liquid fuels, including bio-fuels. The result will be lower pollutant emissions and lower the cost of design of new engines.Read moreRead less
High Energy Density - High Delivery Rate Thermal Energy Storage. This project aims to address the intermittency of renewable energy sources using novel thermal storage media. Advanced heat transfer modelling and in situ neutron diffraction and imaging are intended to be used to optimise the microstructure of newly developed miscibility gap thermal storage systems. The new media store energy as the latent heat of fusion of one phase in a stable, high thermal conductivity inverted microstructure. ....High Energy Density - High Delivery Rate Thermal Energy Storage. This project aims to address the intermittency of renewable energy sources using novel thermal storage media. Advanced heat transfer modelling and in situ neutron diffraction and imaging are intended to be used to optimise the microstructure of newly developed miscibility gap thermal storage systems. The new media store energy as the latent heat of fusion of one phase in a stable, high thermal conductivity inverted microstructure. The high energy density of the latent heat (0.5-4.5 Mega Joules/Litre) requires storage volumes as little as five per cent of those relying upon heat capacity and the metal matrix has a hundred-fold greater thermal conductivity than current systems. It is proposed that a range of such materials will be engineered for concentrated solar thermal and space heating applications.Read moreRead less