Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0453320
Funder
Australian Research Council
Funding Amount
$347,886.00
Summary
Advanced Spectroscopy for Nano-characterisation of Materials Chemistry and Properties. This application proposes to establish a cutting-edge spectroscopic facility which includes; electron energy-loss spectroscopy (EELS), energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), photoluminescence (PL) and micro-Raman spectroscopy. Each of the spectrometers to be installed has significantly higher sensitivity and resolution than any other facility available in Australia and is capable ....Advanced Spectroscopy for Nano-characterisation of Materials Chemistry and Properties. This application proposes to establish a cutting-edge spectroscopic facility which includes; electron energy-loss spectroscopy (EELS), energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), photoluminescence (PL) and micro-Raman spectroscopy. Each of the spectrometers to be installed has significantly higher sensitivity and resolution than any other facility available in Australia and is capable of full spectrum imaging. This new spectroscopic infrastructure will enable the knowledge-based development of new materials by allowing complete characterisation of structure-composition-property relationships at the nanometre level.Read moreRead less
Indium arsenic antimony (InAsSb) Quantum Dots for Mid-Infrared Lasers. This proposal will open a new area of research for mid-infrared laser devices. Any achievement from this project will benefit various academic and industrial communities, such as national security, environmental monitoring and spectroscopy. The outcomes of this research could create a new generation of high-performance mid-infrared lasers and put Australian researchers in the forefront of the development in this field.
Ultrafast photonic hammer: A new strategy to synthesise super-dense super-hard nanomaterials. We will develop a new way for laboratory synthesis of new classes of super-hard and super-dense materials at and above the extremely high temperature and density range currently accessible only in nuclear explosions. The ability of ultra-fast laser-induced phase transformations will be exploited aiming to form materials with exotic properties, which are theoretically predicted, but has not experimental ....Ultrafast photonic hammer: A new strategy to synthesise super-dense super-hard nanomaterials. We will develop a new way for laboratory synthesis of new classes of super-hard and super-dense materials at and above the extremely high temperature and density range currently accessible only in nuclear explosions. The ability of ultra-fast laser-induced phase transformations will be exploited aiming to form materials with exotic properties, which are theoretically predicted, but has not experimentally confirmed yet. Our new approach will have a profound interdisciplinary impact. The project will deliver underpinning knowledge, foremost practical expertise, and the prominent training of young researchers to secure Australia's international position among the leaders in the rapidly growing and competitive field of nanotechnology.Read moreRead less
Growth and intermixing of quantum dots for multi-wavelength infrared photodetectors. Quantum dots are nano-scale structures grown by self-assembled epitaxial methods. In this project, intermixing of quantum dots, which is a novel technology to modify the opto-electronic properties of the dots will be studied using ion implantation and subsequent annealing. Optimised growth, implantation and annealing conditions will be used to grow and tune the detection wavelength of the infrared photodetectors ....Growth and intermixing of quantum dots for multi-wavelength infrared photodetectors. Quantum dots are nano-scale structures grown by self-assembled epitaxial methods. In this project, intermixing of quantum dots, which is a novel technology to modify the opto-electronic properties of the dots will be studied using ion implantation and subsequent annealing. Optimised growth, implantation and annealing conditions will be used to grow and tune the detection wavelength of the infrared photodetectors using intersubband transition. This will allow us to fabricate multi-wavelength infrared photodetectors for high performance infrared imaging system. This project involves an exciting combination of fundamental physics and device technology.Read moreRead less
Scaling-up microstructured fibres for terahertz radiation. Terahertz radiation is the last region of the electromagnetic spectrum to be fully utilised. Many applications have been identified but their practicality has been limited by a lack of low-loss flexible waveguides. The waveguides to be developed in this project will build on Australia's existing international lead and investments in photonics as well as extend the dynamic field of microstructured optical fibres, indentified as the 'futur ....Scaling-up microstructured fibres for terahertz radiation. Terahertz radiation is the last region of the electromagnetic spectrum to be fully utilised. Many applications have been identified but their practicality has been limited by a lack of low-loss flexible waveguides. The waveguides to be developed in this project will build on Australia's existing international lead and investments in photonics as well as extend the dynamic field of microstructured optical fibres, indentified as the 'future' of optical fibres. Low-loss flexible waveguides will enable imaging and spectroscopy applications that can reveal and object's internal structure and composition. This will have immediate applications in security, quality control, medical imaging and other safety or industrial applications.Read moreRead less
Nanoparticle fluorescent labels as a platform for high throughput data gathering. Recent developments in genomics require gathering of vast amounts of information in a rapid and cost-effective fashion. To this aim we will develop a new fluorescent labelling technology with adequate throughput and high level of multiplexing. We will exploit recent advances in nanoparticle science combined with our own discoveries concerning rare earth ions as fluorescence activators. Our approach promises a combi ....Nanoparticle fluorescent labels as a platform for high throughput data gathering. Recent developments in genomics require gathering of vast amounts of information in a rapid and cost-effective fashion. To this aim we will develop a new fluorescent labelling technology with adequate throughput and high level of multiplexing. We will exploit recent advances in nanoparticle science combined with our own discoveries concerning rare earth ions as fluorescence activators. Our approach promises a combination of great technological simplicity, low fabrication costs, cutting edge performance and gives an additional time-resolved modality. Our fluorescent labels will be field-tested to search for yet unknown microorganisms.Read moreRead less
Fusion of Laser Ranging Data and Imagery for Generation of 3D Virtual Models. The creation of image texture-mapped, three-dimensional (3D) digital models of object scenes is becoming increasingly more important in virtual reality generation. Visually realistic computer models find application in reverse engineering and industrial metrology and design, but their utility is often limited by shortcomings in accuracy and completeness. This project aims, through a fusion of laser scanner data and dig ....Fusion of Laser Ranging Data and Imagery for Generation of 3D Virtual Models. The creation of image texture-mapped, three-dimensional (3D) digital models of object scenes is becoming increasingly more important in virtual reality generation. Visually realistic computer models find application in reverse engineering and industrial metrology and design, but their utility is often limited by shortcomings in accuracy and completeness. This project aims, through a fusion of laser scanner data and digital photogrammetric imagery, to develop improved mathematical models and computational systems to facilitate advances in automated 3D object reconstruction for high-definition, metrically accurate photo-realistic digital models. The principal outcome from the project will be enhanced 3D computer modelling for engineering applications.
Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0883038
Funder
Australian Research Council
Funding Amount
$160,000.00
Summary
Upgrade key fabrication equipment for specialty fibre and device research and development. Australia remains a world leader in enabling technologies spanning information and communication, lasers, photonic sensing and diagnostics and much more. Underpinning much of this have been key backbone facilities at UNSW and at Sydney. Optical fibre research internationally is moving in new directions and for Australia to continue its leadership role, dedicated facilities for new generation structured opt ....Upgrade key fabrication equipment for specialty fibre and device research and development. Australia remains a world leader in enabling technologies spanning information and communication, lasers, photonic sensing and diagnostics and much more. Underpinning much of this have been key backbone facilities at UNSW and at Sydney. Optical fibre research internationally is moving in new directions and for Australia to continue its leadership role, dedicated facilities for new generation structured optical fibres, which are already impacting much more significantly than conventional fibres, must be available. The upgrade at UNSW will position Australia to continue its leadership and introduce educational and vocational training for the new industries that will depend on these core technologies. Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0667994
Funder
Australian Research Council
Funding Amount
$1,000,000.00
Summary
National Nanolithography Facility. Nanotechnology is expected to have a major impact on quality of life and global economy. It is predicted to generate revenues as big as the ICT sector in 20 years time. The National Nanolithography Facility will enhance the Australian capability in the field of nanoscale science and technology. This will enable Australian researchers to achieve major impacts in many areas of nanotechnology with a strong potential impact on industry sectors such as computers, ....National Nanolithography Facility. Nanotechnology is expected to have a major impact on quality of life and global economy. It is predicted to generate revenues as big as the ICT sector in 20 years time. The National Nanolithography Facility will enhance the Australian capability in the field of nanoscale science and technology. This will enable Australian researchers to achieve major impacts in many areas of nanotechnology with a strong potential impact on industry sectors such as computers, communications, defence, health, bio-security. This facility has the potential for developing new technologies of fundamental as well as applied interest.Read moreRead less
Improving optical data storage and micromachining technology through better modelling and characterisation of their laser beams. The laser sources generally do not have simple (Gaussian) distributions. The applicant has recently developed a model, describing free propagation of complex (non-Gaussian) laser beams. This project seeks to develop a comprehending model for laser beams propagation through complex optical systems. The effects of various optical elements will be defined employing a no ....Improving optical data storage and micromachining technology through better modelling and characterisation of their laser beams. The laser sources generally do not have simple (Gaussian) distributions. The applicant has recently developed a model, describing free propagation of complex (non-Gaussian) laser beams. This project seeks to develop a comprehending model for laser beams propagation through complex optical systems. The effects of various optical elements will be defined employing a novel method known as SAFE (Stable Aggregate of Flexible Elements) which is a compromise between geometrical and physical optics. Applying this model to micromachining and optical data storage (ODS), which need high beam quality (low divergence and good focussibility), enable accurate predictive capability critical to the optimisation of micromachining and ODS designs.Read moreRead less