Early-Stage Medical Diagnostics by Plasmon-Mediated Gas Sensing. This project will investigate the use plasmonic absorption of light in metal nanostructures to activate the selective oxidation/reduction of a gas molecule on a semiconductor nanoparticle. This concept will be used with the aim of developing a sensing technique capable of measuring ultra-low concentrations (ppb) of breath markers for lung cancer detection. It is expected that porous sensing films of semiconductor and metal nanopart ....Early-Stage Medical Diagnostics by Plasmon-Mediated Gas Sensing. This project will investigate the use plasmonic absorption of light in metal nanostructures to activate the selective oxidation/reduction of a gas molecule on a semiconductor nanoparticle. This concept will be used with the aim of developing a sensing technique capable of measuring ultra-low concentrations (ppb) of breath markers for lung cancer detection. It is expected that porous sensing films of semiconductor and metal nanoparticles with well-defined light absorption properties will be fabricated. Superior selectivity will be achieved by matching the wavelength of the absorbed light with the required activation energy for oxidation/reduction. Successful outcomes will enable multi-analyte fingerprint identification by on-chip devices with applications ranging from portable medical diagnostics to national security.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE160100569
Funder
Australian Research Council
Funding Amount
$375,000.00
Summary
Ultra-Porous Devices by Synergistic Aerosol and Atomic Layer Depositions. The project aspires to develop a scalable low-cost approach for the synthesis and integration of ultra-porous films in nanodevices. The project intends to deposit atomic layers onto aerogel-like nanoparticle networks, self-assembled by thermophoresis of flame-made aerosols. This would increase the atomically-deposited layer mass by several hundred-fold per cycle and result in ultra-porous films with electrochemically activ ....Ultra-Porous Devices by Synergistic Aerosol and Atomic Layer Depositions. The project aspires to develop a scalable low-cost approach for the synthesis and integration of ultra-porous films in nanodevices. The project intends to deposit atomic layers onto aerogel-like nanoparticle networks, self-assembled by thermophoresis of flame-made aerosols. This would increase the atomically-deposited layer mass by several hundred-fold per cycle and result in ultra-porous films with electrochemically active surface areas. It is intended that the project will demonstrate the fabrication of solid–gas, solid–liquid and solid–solid nanointerfaces, which will be applicable to key emerging technologies such as wearable medical diagnostics.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE130100161
Funder
Australian Research Council
Funding Amount
$150,000.00
Summary
Next generation of extrusion capability for the fabrication of advanced photonic structures. The cutting-edge extrusion capability will enable the development of novel optical fibres and photonic materials with a wide range of structures in high precision and reproducibility. These new materials will lead to breakthroughs in the emerging research areas of nanophotonics, quantum communication, biosensing and mid-infrared light sources.
Surface tension-confined microfluidics: moving towards a flexible platform for diagnostics. The point-of-care industry is poised to fulfil the international need for effective and mobile diagnostics tools; however current strategies are restricting this from becoming a reality. Surface tension-confined microfluidics provide an opportunity to meet the requirements necessary for flexible platform for point-of-care devices.
Industrial High Efficiency Solar Cells. Photovoltaics is a promising candidate for sustainable energy generation, with Australia well-placed to capture the economic and environmental benefits from maintaining its strong position with this technology. Suntech, a world-leader in silicon solar cell production with US$2 billion annual revenue, will provide a “high profile” showplace for the developed patterning technology. This will enhance commercial opportunities arising from the project and confi ....Industrial High Efficiency Solar Cells. Photovoltaics is a promising candidate for sustainable energy generation, with Australia well-placed to capture the economic and environmental benefits from maintaining its strong position with this technology. Suntech, a world-leader in silicon solar cell production with US$2 billion annual revenue, will provide a “high profile” showplace for the developed patterning technology. This will enhance commercial opportunities arising from the project and confirm Australia’s reputation as a world leader in innovative photovoltaic research. This reputation attracts high-calibre professionals to Australia, stimulates local research and will provide opportunities for local manufacturing to exploit the technology developed as part of this project.Read moreRead less
Perovskite-silicon tandem solar cells: a pathway to 30 per cent efficiency. This project aims to develop a new type of solar cell that is much more efficient than today’s commercial silicon solar cells. Increasing cell efficiency is one of the most effective ways to reduce the cost of solar electricity, but silicon cells are approaching practical and theoretical limits. This project expects to boost the efficiency of silicon solar cells by adding a low-cost solar cell on top to create a tandem d ....Perovskite-silicon tandem solar cells: a pathway to 30 per cent efficiency. This project aims to develop a new type of solar cell that is much more efficient than today’s commercial silicon solar cells. Increasing cell efficiency is one of the most effective ways to reduce the cost of solar electricity, but silicon cells are approaching practical and theoretical limits. This project expects to boost the efficiency of silicon solar cells by adding a low-cost solar cell on top to create a tandem device. The expected outcome is a solar cell that can convert more than 30 per cent of incident sunlight into electricity, compared to 20-25 per cent for current cells. Developing cheap, high efficiency solar cells should further reduce the cost of solar electricity, and accelerate the uptake of clean energy.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE140101056
Funder
Australian Research Council
Funding Amount
$380,156.00
Summary
Rational Design of Plasmonic Nanoassemblies for Rapid and Multiplexed Point-of-Care Diagnosis by Surface-enhanced Raman Spectroscopy (SERS). The central aim of this project is to develop a novel technology/sensor platform for rapid, quantitative, multiplexed and highly sensitive point-of-care diagnostics using surface-enhanced Raman spectroscopy (SERS) as the read-out approach. Three-dimensional plasmonic superstructures as novel SERS labels will be synthesised and characterised at single-partic ....Rational Design of Plasmonic Nanoassemblies for Rapid and Multiplexed Point-of-Care Diagnosis by Surface-enhanced Raman Spectroscopy (SERS). The central aim of this project is to develop a novel technology/sensor platform for rapid, quantitative, multiplexed and highly sensitive point-of-care diagnostics using surface-enhanced Raman spectroscopy (SERS) as the read-out approach. Three-dimensional plasmonic superstructures as novel SERS labels will be synthesised and characterised at single-particle level and the choice of optimal SERS-active three-dimensional superstructures for use will be guided by empirical structure-activity correlations in combination with computer simulations. Tumour biomarkers for breast cancer will be employed as the model target for establishing the detection platform in a portable configuration for point-of-care diagnostics.Read moreRead less
High Performance Monolithic Perovskite Photocapacitors. Monolithic perovskite photocapacitor (MPPC) consisted of integrated energy harvesting perovskite solar cell and energy storage supercapacitor through an internally shared electrode can deliver stable electricity by harnessing solar energy. The performance of MPPC is dependent of properties of the shared electrode materials. This project aims to synthesis carbon materials with tailored surface, electrical and structure properties that are re ....High Performance Monolithic Perovskite Photocapacitors. Monolithic perovskite photocapacitor (MPPC) consisted of integrated energy harvesting perovskite solar cell and energy storage supercapacitor through an internally shared electrode can deliver stable electricity by harnessing solar energy. The performance of MPPC is dependent of properties of the shared electrode materials. This project aims to synthesis carbon materials with tailored surface, electrical and structure properties that are required to make a highly functioning shared electrode in MPPC. The goal is to fabricate stable, high performance MPPC. Successful achievement of the outcomes will enable cost-effective, reliable, solar electricity, placing Australia at the forefront of exploiting photovoltaics technologies.Read moreRead less
Functional metasurfaces and metadevices. This project aims to develop and use smart metadevices for light control, high-bandwidth wireless communication and security. Unique properties of metamaterials suggest several useful effects not yet used in real-life. Using electromagnetism, mechanics, colloidal chemistry and nanofabrication, this project will design user-friendly tuneable metadevices made of ultra-thin metasurfaces and three-dimensional liquid metamaterials, and demonstrate electromagne ....Functional metasurfaces and metadevices. This project aims to develop and use smart metadevices for light control, high-bandwidth wireless communication and security. Unique properties of metamaterials suggest several useful effects not yet used in real-life. Using electromagnetism, mechanics, colloidal chemistry and nanofabrication, this project will design user-friendly tuneable metadevices made of ultra-thin metasurfaces and three-dimensional liquid metamaterials, and demonstrate electromagnetic wave manipulation in microwave, terahertz and optical frequency ranges. The outcomes are expected to create opportunities for Australian industry to commercialise smart materials.Read moreRead less