The Coupling of Plasticity, Microstructure and Phase Transformations in the Design of Novel Magnesium Alloys for the Automotive Industry. The desire to reduce the weight of automobiles due to legislative requirements on fuel emissions and to reduce overall fuel consumption is the driving force behind research into the development of new Mg-based alloys to replace the heavier steel and Al-alloy components in automobiles. Given the enormous worldwide transportation market and the environmental and ....The Coupling of Plasticity, Microstructure and Phase Transformations in the Design of Novel Magnesium Alloys for the Automotive Industry. The desire to reduce the weight of automobiles due to legislative requirements on fuel emissions and to reduce overall fuel consumption is the driving force behind research into the development of new Mg-based alloys to replace the heavier steel and Al-alloy components in automobiles. Given the enormous worldwide transportation market and the environmental and legislative motivation for reducing fuel emissions, the development of new Mg-based alloys capable of meeting this demand from automotive manufacturers represents both a potentially large economic advantage to the country of development as well as helping to address the environmental concern about fuel emissions.Read moreRead less
Thixotropic Structure Generation and Semisolid Casting of Aluminium and Magnesium Alloys. A range of aluminium and magnesium alloys will be prepared by controlled-pouring to produce structures suitable for semisolid forming. The conditions around grain nucleation and growth will be studied to ascertain the controlling factors in producing suitable microstructures. A computer model to simulate the thixotropic structure formation and define the processing parameters will be developed. Semisolid c ....Thixotropic Structure Generation and Semisolid Casting of Aluminium and Magnesium Alloys. A range of aluminium and magnesium alloys will be prepared by controlled-pouring to produce structures suitable for semisolid forming. The conditions around grain nucleation and growth will be studied to ascertain the controlling factors in producing suitable microstructures. A computer model to simulate the thixotropic structure formation and define the processing parameters will be developed. Semisolid casting using the produced feedstock will lead to extensive knowledge about the effect of different microstructures and alloys on semisolid castability. Outcomes from the project will significantly advance the scientific understanding of the thixotropic structure generation and accelerate the development of semisolid processing technology.Read moreRead less
Design of reactive foils for joining amorphous alloys. Amorphous alloys or metallic glasses are special materials that retain the random structure of a liquid but in a solid form. They can show special properties of very high strength, toughness and corrosion resistance. The enormous difficulty in joining amorphous alloys to make larger assemblies is greatly curbing their uptake in technology. In this research, state of the art experimental and computational tools will be used to investigate the ....Design of reactive foils for joining amorphous alloys. Amorphous alloys or metallic glasses are special materials that retain the random structure of a liquid but in a solid form. They can show special properties of very high strength, toughness and corrosion resistance. The enormous difficulty in joining amorphous alloys to make larger assemblies is greatly curbing their uptake in technology. In this research, state of the art experimental and computational tools will be used to investigate the extremely fast high temperature reactions occurring in reactive foils of layered metals which, when inserted at the proposed join and ignited, quickly produce a bond. The research will lay the foundation for a robust and reliable means for joining amorphous alloys by means of reactive foils. Read moreRead less
A Novel Approach to Grain Refinement of Cast Metals. This proposal combines fundamental scientific studies with applied engineering research. The outcomes will offer materials scientists and engineers with a totally new way to understand the grain refinement of cast metals. The new scientific knowledge generated will put Australia at the absolute forefront of the field and maintain our internationally leading position. The new grain refiners and the relevant master alloys to be developed will ....A Novel Approach to Grain Refinement of Cast Metals. This proposal combines fundamental scientific studies with applied engineering research. The outcomes will offer materials scientists and engineers with a totally new way to understand the grain refinement of cast metals. The new scientific knowledge generated will put Australia at the absolute forefront of the field and maintain our internationally leading position. The new grain refiners and the relevant master alloys to be developed will have strong potential to be commercialized to produce cast metals with much improved properties and performance. This will not only increase Australian competitive ability in the international market, but will also make considerable economic benefits.Read moreRead less
A Novel Surface Alloying Technique to Improve the Corrosion and Wear Resistance of Magnesium Alloys. Surface mechanical attrition treatment will be used to generate nanometer-sized grains in the surface layer of engineering magnesium alloys, and therefore activate the surface of this material. Together with the use of efficient activators, the project will develop a novel low temperature surface alloying technique to significantly improve the wear and corrosion resistance of magnesium alloys wi ....A Novel Surface Alloying Technique to Improve the Corrosion and Wear Resistance of Magnesium Alloys. Surface mechanical attrition treatment will be used to generate nanometer-sized grains in the surface layer of engineering magnesium alloys, and therefore activate the surface of this material. Together with the use of efficient activators, the project will develop a novel low temperature surface alloying technique to significantly improve the wear and corrosion resistance of magnesium alloys without changing the substrate properties. Microstructural features and the wear and corrosion resistance of the ultrafine-grained surface layer will be examined. In addition, it may be possible to combine the surface alloying process with the conventional ageing process together in order to save energy.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0453436
Funder
Australian Research Council
Funding Amount
$448,284.00
Summary
An advanced electron microanalytical facility for South-East Queensland. Funding is requested to purchase an electron probe micro-analysis (EPMA) unit to be located at The University of Queensland and to upgrade and re-configure the scanning electron microscope facilities at the Queensland University of Technology. These integrated systems will be shared between the two institutions and will provide much needed infrastructure for several high profile and high performing groups. These groups incl ....An advanced electron microanalytical facility for South-East Queensland. Funding is requested to purchase an electron probe micro-analysis (EPMA) unit to be located at The University of Queensland and to upgrade and re-configure the scanning electron microscope facilities at the Queensland University of Technology. These integrated systems will be shared between the two institutions and will provide much needed infrastructure for several high profile and high performing groups. These groups include; Metallurgy, Materials, Earth Sciences, Chemistry, and Biomaterials. Acquisition of these facilities will complement the instrument mix at both institutions and will provide infrastructure that is necessary to sustain the leading edge research conducted by groups associated with this application.Read moreRead less
Surface Nanocrystallization and Surface Alloying of Nonferrous Alloys. The research will offer materials scientists a totally new way to undertake surface modification for nonferrous alloys. The low temperature surface alloying technique to be developed will considerably improve the surface durability, therefore increase the service life of components. Combination of the surface alloying treatment with the ageing process can save energy and lower the cost of product. This will enhance Austral ....Surface Nanocrystallization and Surface Alloying of Nonferrous Alloys. The research will offer materials scientists a totally new way to undertake surface modification for nonferrous alloys. The low temperature surface alloying technique to be developed will considerably improve the surface durability, therefore increase the service life of components. Combination of the surface alloying treatment with the ageing process can save energy and lower the cost of product. This will enhance Australia's competitive ability in international markets. The study of atomic diffusion in nanomaterials will significantly contribute to material science and increase Australian research reputation in the world. In addition, the project initiates the research on surface nanocrystallization in Australia. Read moreRead less
A Unified Crystallographic Theory of Phase Transformations in Solids. Phase transformations control the microstructures that govern the properties of metallic materials. The unified crystallographic theory to be developed will improve the understanding of phase transformation and then enhance the ability to produce high performance metals and alloys. This is particularly important in the automotive and aeronautical industries, as these sectors seek increasing fuel efficiency through weight reduc ....A Unified Crystallographic Theory of Phase Transformations in Solids. Phase transformations control the microstructures that govern the properties of metallic materials. The unified crystallographic theory to be developed will improve the understanding of phase transformation and then enhance the ability to produce high performance metals and alloys. This is particularly important in the automotive and aeronautical industries, as these sectors seek increasing fuel efficiency through weight reduction. The new scientific knowledge generated will significantly impact and contribute to the fields of physical metallurgy and materials science. Furthermore, the research will also strengthen Australia's international leading position in the fields because it is based on the theories developed in Australia.Read moreRead less
Bulk Metallic Glasses and Their Applications. Bulk Metallic Glasses (BMG) represent a significant breakthrough in amorphous metallic materials research and opens up an enormous potential for BMG as engineering materials. However, currently there is no effective way to select optimum composition. The project will bring Australia together with two leading international research groups to develop a computer model for BMG alloy design and to further optimise BMG production processes. BMG engineering ....Bulk Metallic Glasses and Their Applications. Bulk Metallic Glasses (BMG) represent a significant breakthrough in amorphous metallic materials research and opens up an enormous potential for BMG as engineering materials. However, currently there is no effective way to select optimum composition. The project will bring Australia together with two leading international research groups to develop a computer model for BMG alloy design and to further optimise BMG production processes. BMG engineering components will be produced. The project provides Australian researchers access to leading expertise and specialized facilities which will rapidly bring us to the highest level. It represents Australia's first involvement in this significant material innovation. Read moreRead less
The development of optimum microstructures in hot worked metals. Hot working is used to obtain the shape and properties of a wide range of metal products. At present our knowledge of how to control the forming process and properties of the final product is limited to laboratory conditions that do not apply in industry. This work will systematically study the deformation behaviour of a range of metals, including steel, titanium, aluminium, magnesium and copper from standard laboratory to real i ....The development of optimum microstructures in hot worked metals. Hot working is used to obtain the shape and properties of a wide range of metal products. At present our knowledge of how to control the forming process and properties of the final product is limited to laboratory conditions that do not apply in industry. This work will systematically study the deformation behaviour of a range of metals, including steel, titanium, aluminium, magnesium and copper from standard laboratory to real industrial conditions. We will develop advanced models to predict the properties of these metals for any hot working process and identify opportunities to develop new high strength products.Read moreRead less