Development of novel cathodes for next generation solid oxide fuel cells. This project will provide novel cathodes to reduce the operating temperature of the Solid Oxide Fuel Cell (SOFC) as low as 500 degrees celsius. The technology may lead to widespread utilization of SOFCs, thus providing great assistance to Australia's industries in term of reducing carbon dioxide emission and easing pressure from carbon tax.
Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful ....Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful until carbon dioxide poisoning can be prevented. This project expects to make these LT-SOFC cathode materials commercially viable, solving a problem for the widespread use of low temperature solid oxide fuel cells.Read moreRead less
High Performance Anode for Direct Ammonia Solid Oxide Fuel Cells. Solid oxygen fuel cells are a clean energy generation device with very high energy efficiency and if with hydrogen as fuel, the emission is zero. However, the utilisation of hydrogen is limited by on-board storage. Ammonia is a promising hydrogen carrier and can be directly fed to solid oxide fuel cells without fuel storage problem, and the products are just hydrogen and nitrogen. For direct ammonia solid oxide fuel cells, the key ....High Performance Anode for Direct Ammonia Solid Oxide Fuel Cells. Solid oxygen fuel cells are a clean energy generation device with very high energy efficiency and if with hydrogen as fuel, the emission is zero. However, the utilisation of hydrogen is limited by on-board storage. Ammonia is a promising hydrogen carrier and can be directly fed to solid oxide fuel cells without fuel storage problem, and the products are just hydrogen and nitrogen. For direct ammonia solid oxide fuel cells, the key challenge is the anode. This project aims to develop a high performance anode for direct ammonia solid oxide fuel cells with both high activity and high stability at low temperature (below 600 degree C), thus addressing a key issue to make the direct ammonia solid oxide fuel cells commercially viable.Read moreRead less
Composites for thermal expansion matched oxygen electrodes. This project aims to develop high performance composite oxygen electrodes by using both negative thermal expansion materials and electrolyte materials to tailor the thermal expansion and activities of the perovskite-based electrodes for use in reduced temperature solid oxide cells. Such composite electrodes will show highly matched thermal expansion with electrolyte without sacrificing high activity at reduced temperatures. This project ....Composites for thermal expansion matched oxygen electrodes. This project aims to develop high performance composite oxygen electrodes by using both negative thermal expansion materials and electrolyte materials to tailor the thermal expansion and activities of the perovskite-based electrodes for use in reduced temperature solid oxide cells. Such composite electrodes will show highly matched thermal expansion with electrolyte without sacrificing high activity at reduced temperatures. This project seeks to address an important practical issue in the operation of solid oxide power cells - thermal expansion compatibility, which causes poor efficiency outside a narrow temperature band.Read moreRead less
Understanding dynamic interfaces in electrochemical systems. This project aims to develop nanoscale characterisation methods to understand dynamic processes in zinc-ion batteries and high temperature electrolysis systems under real working (in operando) conditions. This project expects to reveal critical solid-liquid and solid-gas interfacial processes in these two distinctly different electrochemical systems. The expected outcomes include improved understanding of electrochemical interfaces and ....Understanding dynamic interfaces in electrochemical systems. This project aims to develop nanoscale characterisation methods to understand dynamic processes in zinc-ion batteries and high temperature electrolysis systems under real working (in operando) conditions. This project expects to reveal critical solid-liquid and solid-gas interfacial processes in these two distinctly different electrochemical systems. The expected outcomes include improved understanding of electrochemical interfaces and improved tools and methods to observe nanoscale interfacial processes. This information can be used to underpin mechanistic models, which will facilitate new materials design. Read moreRead less
Highly ordered and tuneable mesostructured perfluorosulfonic acid polymers as novel proton exchange membranes for fuel cells. The purpose of the project is to develop an innovative perfluorofonic acid based proton exchange membranes (PEM) with ordered and tuneable mesopores and it is expected that PEM fuel cell power systems based on such new PEMs will have significant impact on the advancement of fuel cell technologies and the reduction in greenhouse gas emission.
Development of high efficiency nanocatalysts using novel electron beam fabrication and imaging techniques. This project will develop a new approach for fabricating and studying nanocatalysts based on our expertise in electron beam induced deposition (EBID) of nanostructured materials and environmental scanning electron microscopy (ESEM). ESEM will be used to conduct unique, time-resolved studies of nano-scale, catalysed chemical reactions at elevated temperatures and pressures. The project will ....Development of high efficiency nanocatalysts using novel electron beam fabrication and imaging techniques. This project will develop a new approach for fabricating and studying nanocatalysts based on our expertise in electron beam induced deposition (EBID) of nanostructured materials and environmental scanning electron microscopy (ESEM). ESEM will be used to conduct unique, time-resolved studies of nano-scale, catalysed chemical reactions at elevated temperatures and pressures. The project will advance fundamental understanding and applicability of EBID, ESEM and nanocatalysis. It will yield novel, highly efficient, industrially relevant nanocatalysts for the production of renewable (green) and low emission (clean) energy, with particular applications in hydrogen fuel cells and the catalytic oxidation of carbon monoxide.Read moreRead less