Development of novel cathodes for next generation solid oxide fuel cells. This project will provide novel cathodes to reduce the operating temperature of the Solid Oxide Fuel Cell (SOFC) as low as 500 degrees celsius. The technology may lead to widespread utilization of SOFCs, thus providing great assistance to Australia's industries in term of reducing carbon dioxide emission and easing pressure from carbon tax.
Endothelial Development From Pluripotent Stem Cells As A Means To Study Pathology In Pulmonary Artery Hypertension
Funder
National Health and Medical Research Council
Funding Amount
$613,311.00
Summary
Pulmonary artery hypertension (PAH) is a fatal disease primarily affecting young adults. It is caused by a defect in cells that form the vessel that carries blood from the heart to the lungs. We will use stem cells made from the skin of PAH patients to examine why the blood vessel cells from these patients fail to function normally.
Thermal management of methane fuelled planar solid oxide fuel cells. Solid oxide fuel cells (SOFCs) are novel devices for generating energy with extremely low emissions. This project will conduct novel experiments and numerical simulations to improve the efficiency of SOFCs. This will then allow wider adoption of this technology, thus reducing CO2 and other environmental emissions from our power generation systems.
Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful ....Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful until carbon dioxide poisoning can be prevented. This project expects to make these LT-SOFC cathode materials commercially viable, solving a problem for the widespread use of low temperature solid oxide fuel cells.Read moreRead less
Degradation of atomically dispersed M-N-C carbon catalysts in acidic media. This project aims to provide a clear understanding of the degradation mechanisms of transition metal (M) and nitrogen (N) co-doped carbon (M-N-C) catalysts in acidic media by utilising new model catalysts, standardised degradation tests, comprehensive catalyst characterisation, and machine learning tools to interrogate mechanistic hypotheses and link degradation mechanisms to specific catalyst characteristics. This proje ....Degradation of atomically dispersed M-N-C carbon catalysts in acidic media. This project aims to provide a clear understanding of the degradation mechanisms of transition metal (M) and nitrogen (N) co-doped carbon (M-N-C) catalysts in acidic media by utilising new model catalysts, standardised degradation tests, comprehensive catalyst characterisation, and machine learning tools to interrogate mechanistic hypotheses and link degradation mechanisms to specific catalyst characteristics. This project expects to generate new knowledge on rationally designing robust hydrogen fuel cell catalysts. This will provide significant benefits, such as new knowledge on catalyst degradation, new catalysts for energy conversion applications, and collaborations with the industry to accelerate Australia’s shift to renewable energy.Read moreRead less
Engineering the Microstructure of Electrodes for Advanced Fuel Cells. A polymer solution-based integration technique is proposed to be developed to fabricate polymer electrolyte membrane fuel cells, allowing for effective engineering of the porous networks and interfaces within electrodes and cells. This novel systems materials engineering approach is expected to overcome the drawbacks of the conventional hot pressing method, enabling precise integration of nanostructured electrodes and membrane ....Engineering the Microstructure of Electrodes for Advanced Fuel Cells. A polymer solution-based integration technique is proposed to be developed to fabricate polymer electrolyte membrane fuel cells, allowing for effective engineering of the porous networks and interfaces within electrodes and cells. This novel systems materials engineering approach is expected to overcome the drawbacks of the conventional hot pressing method, enabling precise integration of nanostructured electrodes and membrane into high-performance, flexible fuel cells. The outcomes of this research aim to provide a unique opportunity for Australia to become a world leader in the rapidly-emerging clean energy technology, and critical manufacturing of new energy generation systems for domestic uses and exports, thereby producing important economic benefits.Read moreRead less
High Performance Anode for Direct Ammonia Solid Oxide Fuel Cells. Solid oxygen fuel cells are a clean energy generation device with very high energy efficiency and if with hydrogen as fuel, the emission is zero. However, the utilisation of hydrogen is limited by on-board storage. Ammonia is a promising hydrogen carrier and can be directly fed to solid oxide fuel cells without fuel storage problem, and the products are just hydrogen and nitrogen. For direct ammonia solid oxide fuel cells, the key ....High Performance Anode for Direct Ammonia Solid Oxide Fuel Cells. Solid oxygen fuel cells are a clean energy generation device with very high energy efficiency and if with hydrogen as fuel, the emission is zero. However, the utilisation of hydrogen is limited by on-board storage. Ammonia is a promising hydrogen carrier and can be directly fed to solid oxide fuel cells without fuel storage problem, and the products are just hydrogen and nitrogen. For direct ammonia solid oxide fuel cells, the key challenge is the anode. This project aims to develop a high performance anode for direct ammonia solid oxide fuel cells with both high activity and high stability at low temperature (below 600 degree C), thus addressing a key issue to make the direct ammonia solid oxide fuel cells commercially viable.Read moreRead less
Composites for thermal expansion matched oxygen electrodes. This project aims to develop high performance composite oxygen electrodes by using both negative thermal expansion materials and electrolyte materials to tailor the thermal expansion and activities of the perovskite-based electrodes for use in reduced temperature solid oxide cells. Such composite electrodes will show highly matched thermal expansion with electrolyte without sacrificing high activity at reduced temperatures. This project ....Composites for thermal expansion matched oxygen electrodes. This project aims to develop high performance composite oxygen electrodes by using both negative thermal expansion materials and electrolyte materials to tailor the thermal expansion and activities of the perovskite-based electrodes for use in reduced temperature solid oxide cells. Such composite electrodes will show highly matched thermal expansion with electrolyte without sacrificing high activity at reduced temperatures. This project seeks to address an important practical issue in the operation of solid oxide power cells - thermal expansion compatibility, which causes poor efficiency outside a narrow temperature band.Read moreRead less
All-Metal Nanoporous Materials as Highly Active Electrocatalysts. This project aims to create new avenues for well-controlled large-scale synthesis of hierarchical nanoporous platinum-based architectures, and develop applications for the resultant new electrocatalysts. Developing novel high-performance, low-cost, and long-life electrode catalysts can improve the efficiency, cost, and durability of energy conversion technology. The project plans to use the unique properties of well-defined nanoar ....All-Metal Nanoporous Materials as Highly Active Electrocatalysts. This project aims to create new avenues for well-controlled large-scale synthesis of hierarchical nanoporous platinum-based architectures, and develop applications for the resultant new electrocatalysts. Developing novel high-performance, low-cost, and long-life electrode catalysts can improve the efficiency, cost, and durability of energy conversion technology. The project plans to use the unique properties of well-defined nanoarchitectures to reduce platinum content and to improve electrocatalytic performance. Nanoporous systems in electrocatalysts can provide more active sites and effective surface permeability, which should enhance catalytic activity. Project outcomes may also contribute to our understanding of the relationships among morphologies, pore structures, surface atomic structures and catalytic activities to guide the development of other kinds of high performance nanoporous catalysts.Read moreRead less