Powering Next Generation Wearable Electronics: Moisture Electric Generator . This project aims to develop next generation energy harvesting device which can directly generate electricity from the moisture in the air for self-powered, wearable electronics. The goal will be achieved by developing a new class of carbon based nanomaterials and large scale printing technology, through optimizing the materials defects, printing process and electrode configuration. The expected outcomes will be new el ....Powering Next Generation Wearable Electronics: Moisture Electric Generator . This project aims to develop next generation energy harvesting device which can directly generate electricity from the moisture in the air for self-powered, wearable electronics. The goal will be achieved by developing a new class of carbon based nanomaterials and large scale printing technology, through optimizing the materials defects, printing process and electrode configuration. The expected outcomes will be new electronic materials for a wide range of end uses in wearable electronics, significant advances in self-powered, environmentally friendly devices, and commercialisation of the technology to Australian industries.Read moreRead less
Functional two-dimensional materials for photocatalysis. This project aims to explore and tailor two-dimensional materials and heterostructures by new synthetic strategies, and to develop a comprehensive understanding of the effects of crystalline and electronic structures on photocatalysis at the atomic level. The project expects to provide deep insight into catalytic mechanisms by bridging the current gap between realistic systems and theoretical calculations. By simply using solar energy, the ....Functional two-dimensional materials for photocatalysis. This project aims to explore and tailor two-dimensional materials and heterostructures by new synthetic strategies, and to develop a comprehensive understanding of the effects of crystalline and electronic structures on photocatalysis at the atomic level. The project expects to provide deep insight into catalytic mechanisms by bridging the current gap between realistic systems and theoretical calculations. By simply using solar energy, the project aims to provide an efficient and durable method for clean energy generation/conversion, and carbon sequestration. This project will build national research capacity in an emerging field and put Australia at the forefront of research on photocatalysis to address energy and environmental issues. Read moreRead less
Carbon-free Energy Storage and Conversion Using Ammonia as a Mediator. This project aims to develop essential technologies for ammonia-mediated energy storage, hydrogen production, and electricity generation. This project expects to generate new understandings on designing novel multi-atom-cluster catalysts for the critical ammonia synthesis, electrolysis, and oxidation processes using interdisciplinary approaches. The expected outcomes of this project include multi-functional electrocatalysts, ....Carbon-free Energy Storage and Conversion Using Ammonia as a Mediator. This project aims to develop essential technologies for ammonia-mediated energy storage, hydrogen production, and electricity generation. This project expects to generate new understandings on designing novel multi-atom-cluster catalysts for the critical ammonia synthesis, electrolysis, and oxidation processes using interdisciplinary approaches. The expected outcomes of this project include multi-functional electrocatalysts, fundamental insights of principles for electrocatalyst design, and prototype technologies. This should provide significant benefits for the harvest of clean energy, the safe utilization of hydrogen, and the development of carbon-free fuels, which are essential for optimizing the energy structure of Australia.Read moreRead less
Controlling and Understanding Interface Chemistry for Energy Conversions. This project aims to develop a promising electrocatalyst technology platform, based on novel 2D material architectures that have applications ranging from hydrogen generation via water splitting through to carbon dioxide reduction. The project is expected to generate advanced knowledge for the rational design of electrocatalysts and to promote the development of renewable energy technologies. Expected outcomes include a cl ....Controlling and Understanding Interface Chemistry for Energy Conversions. This project aims to develop a promising electrocatalyst technology platform, based on novel 2D material architectures that have applications ranging from hydrogen generation via water splitting through to carbon dioxide reduction. The project is expected to generate advanced knowledge for the rational design of electrocatalysts and to promote the development of renewable energy technologies. Expected outcomes include a clear understanding of the relevant fundamental science and mechanisms, a framework for designing and optimising for specific applications, and a demonstration of prototype devices. This project is of great benefit for addressing Australia’s energy and environmental concerns and boosting national economic growth as well.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE120100098
Funder
Australian Research Council
Funding Amount
$230,000.00
Summary
A comprehensive gas/vapour sorption facility for the fast advancement of decarbonised energy technologies. Solutions to clean energy production, storage and use are critical to Australia’s prosperity, yet there is a significant lack of targeted research facilities for the development of the highly needed materials and technologies for powering a sustainable Australia. This facility will bring research efforts closer to practical solutions.
Controlling nickel-base alloy high temperature corrosion in CO2-rich gases. Coal provides cheap energy for Australia but emits carbon dioxide (CO2) in large quantities. The solution is to improve the efficiency of coal fired power plants and use CO2 capture technology. This is feasible by raising steam temperatures and using oxyfuel process where coal is burnt in oxygen rather than in air. Thus the hot combustion gas is very rich in CO2 plus water vapour, which is however very corrosive at high ....Controlling nickel-base alloy high temperature corrosion in CO2-rich gases. Coal provides cheap energy for Australia but emits carbon dioxide (CO2) in large quantities. The solution is to improve the efficiency of coal fired power plants and use CO2 capture technology. This is feasible by raising steam temperatures and using oxyfuel process where coal is burnt in oxygen rather than in air. Thus the hot combustion gas is very rich in CO2 plus water vapour, which is however very corrosive at high temperatures. Traditional steels are inadequate. Instead, nickel-base alloys are needed. This project aims to investigate the corrosion behaviour of nickel base alloys in carbon dioxide - water atmospheres, and ways of preventing this corrosion by controlling gas composition and appropriate alloying, which is essential for next generation power plant design.Read moreRead less
Role of oxide grain boundaries in controlling high temperature corrosion of steels by carbon dioxide-rich gases. Advanced coal combustion technologies make carbon dioxide capture possible, but require improved materials to handle hot carbon dioxide-rich gases. These gases are surprisingly corrosive and the corrosion process is not fully understood. This project aims to achieve this understanding and to provide the basis for future alloy design.
Heat-resisting iron-nickel base alloys in challenging new applications: oxygen permeabilities and resistance to internal oxidation. There is a pressing need to develop heat resisting alloys which can function adequately in higher operating temperatures and gas mixtures rich in carbon and hydrogen to be handled in advanced technologies for power generation. The expected outcomes of this project will provide the basis for design/selection of these more corrosion-resistant alloys.
Lead-free oxide perovskites for highly efficient solar cells. This project aims to develop nanostructured lead-free oxide perovskites for solar energy applications. These materials will strengthen the future of photovoltaic technology by overcoming bandgap voltage limitations and toxicity/stability issues that plague conventional silicon-based and emerging halide perovskite-based solar cells. This project is expected to advance the rational design of solar cells based on oxide perovskites, which ....Lead-free oxide perovskites for highly efficient solar cells. This project aims to develop nanostructured lead-free oxide perovskites for solar energy applications. These materials will strengthen the future of photovoltaic technology by overcoming bandgap voltage limitations and toxicity/stability issues that plague conventional silicon-based and emerging halide perovskite-based solar cells. This project is expected to advance the rational design of solar cells based on oxide perovskites, which are efficient, high output voltage, environmentally friendly photovoltaic technology Success of the proposed programme paves the way to promote photovoltaic technology as a mainstream power generation source and a significant contributor to achieving energy, environmental and economic goals.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE190100504
Funder
Australian Research Council
Funding Amount
$384,000.00
Summary
Interphases and interfaces of nanomaterials in potassium-ion batteries. This project aims to improve the fundamental understanding of interfacial interactions in multicomponent materials, which is a critical precursor to successfully designing and experimentally validating novel layered sulphide systems for potassium-ion batteries. A new layered structure construction technique will be employed to enhance the intrinsic electronic and ionic conductivities in the anode by controllable interphase a ....Interphases and interfaces of nanomaterials in potassium-ion batteries. This project aims to improve the fundamental understanding of interfacial interactions in multicomponent materials, which is a critical precursor to successfully designing and experimentally validating novel layered sulphide systems for potassium-ion batteries. A new layered structure construction technique will be employed to enhance the intrinsic electronic and ionic conductivities in the anode by controllable interphase and interface engineering. The expected outcomes of this project are to generate potassiumion batteries with high energy density, high safety, and long cycle life for next generation energy storage. This project should give Australia a competitive edge in the globally emerging sustainable manufacturing and energy-storage technologies.Read moreRead less