Bioelectronics: addressing the biointerface challenge. This project aims to develop bioelectronic materials with long operational stability in physiological conditions and enhanced electronic performance that will effectively interface with electroresponsive tissue. These new materials will be integrated into bioadhesives from which simple bioelectronics devices will be fabricated and assessed for their capability to modulate biosignals and to interact with tissue. Disruption in biosignals cause ....Bioelectronics: addressing the biointerface challenge. This project aims to develop bioelectronic materials with long operational stability in physiological conditions and enhanced electronic performance that will effectively interface with electroresponsive tissue. These new materials will be integrated into bioadhesives from which simple bioelectronics devices will be fabricated and assessed for their capability to modulate biosignals and to interact with tissue. Disruption in biosignals causes numerous medical conditions such as epilepsy and heart failure and the development of flexible and biocompatible medical electronics devices that interface with tissue is essential for regaining and modulating these signals.Read moreRead less
A novel scintillating optical fibre array for cancer imaging and therapy. This project aims to realise a next-generation detector technology that delivers the first fully integrated solution to the X-ray imaging and dose measurement needs of cancer radiation therapy. It is planned that this will be achieved by optimising an experimental prototype device employing a scintillating optical fibre array to generate an optical signal that preserves a tissue-equivalent detector response. The acquired d ....A novel scintillating optical fibre array for cancer imaging and therapy. This project aims to realise a next-generation detector technology that delivers the first fully integrated solution to the X-ray imaging and dose measurement needs of cancer radiation therapy. It is planned that this will be achieved by optimising an experimental prototype device employing a scintillating optical fibre array to generate an optical signal that preserves a tissue-equivalent detector response. The acquired digital image can thus be used to simultaneously verify geometric accuracy (correct patient positioning) and dosimetric accuracy (correct dose distribution). This is not currently possible with existing X-ray detector technology and offers an improvement in treatment accuracy.Read moreRead less
Combined optical and electrical stimulation of auditory neurons. The bionic ear, which has now helped to improve the hearing of over 200,000 people worldwide, is a great example of Australian innovation success. This project aims to develop the fundamental technology that will underpin the next generation of these devices using a combination of infrared light and electrical signals to stimulate auditory nerves.
Industrial Transformation Training Centres - Grant ID: IC180100024
Funder
Australian Research Council
Funding Amount
$4,000,000.00
Summary
ARC Training Centre for Medical Implant Technologies. The ARC Training Centre for Medical Implant Technologies aims to train a new generation of interdisciplinary engineers and to transform the orthopaedic and maxillofacial implant industry in Australia. In collaboration with industry, universities and hospitals, the Centre will build a dynamic training environment for interdisciplinary engineers to develop and evaluate personalised implants and surgeries. It will create new networks, internatio ....ARC Training Centre for Medical Implant Technologies. The ARC Training Centre for Medical Implant Technologies aims to train a new generation of interdisciplinary engineers and to transform the orthopaedic and maxillofacial implant industry in Australia. In collaboration with industry, universities and hospitals, the Centre will build a dynamic training environment for interdisciplinary engineers to develop and evaluate personalised implants and surgeries. It will create new networks, international collaborations and a generation of industry-ready researchers critical for growing Australia’s industry. The advances in materials and savings in time for procedures will reduce costs.
Read moreRead less
Biomimetic blood bag materials for prolonged platelet storage. Platelet storage is limited to five to seven days before there is a reduction in viable platelets. This results in a continual mismatch between supply and demand resulting in patients in remotes areas or those that have rare phenotypes missing out on platelets. It also results in the wastage of platelets because they expire before they can be used clinically. This project aims to extend the platelet shelf life beyond seven days by de ....Biomimetic blood bag materials for prolonged platelet storage. Platelet storage is limited to five to seven days before there is a reduction in viable platelets. This results in a continual mismatch between supply and demand resulting in patients in remotes areas or those that have rare phenotypes missing out on platelets. It also results in the wastage of platelets because they expire before they can be used clinically. This project aims to extend the platelet shelf life beyond seven days by developing biomimetic blood bag materials that reflect the natural molecular structures of blood vessels through the use of novel synthetic and biological materials. With the realisation of longer platelet storage times, this project aims to have significant impacts on the health and economic benefits of Australians.Read moreRead less
Controlling the adhesome to regulate cell fate on biomaterials. Mesenchymal stem cell-based tissue engineering practices are hampered worldwide by the lack of appreciation and understanding of the matrix-mediated cues that must be provided during adhesion and spreading to drive cells to definitive tissue end points. This project will address these knowledge deficiencies by combining high throughput array technologies, a set of tailorable self-assembling biomaterials and real-time biosensors to r ....Controlling the adhesome to regulate cell fate on biomaterials. Mesenchymal stem cell-based tissue engineering practices are hampered worldwide by the lack of appreciation and understanding of the matrix-mediated cues that must be provided during adhesion and spreading to drive cells to definitive tissue end points. This project will address these knowledge deficiencies by combining high throughput array technologies, a set of tailorable self-assembling biomaterials and real-time biosensors to rapidly, at high resolution, elucidate how mechanotransductive cues determine the fate choice of mesenchymal stem cells, and furthermore, how to manipulate them with smart biomaterial design to achieve desired outcomes for tissue engineering. Read moreRead less
Complete blood fractionation using a low-cost microfluidic system. This project aims to understand particle focusing in inertial microfluidic systems to design efficient devices for cell sorting. The field of microfluidics could ultimately advance medical research but device design is primitive. Microfluidic particle separations are not thoroughly simulated before fabrication to predict performance. This project is expected to accelerate progress in design of efficient microfluidic devices. The ....Complete blood fractionation using a low-cost microfluidic system. This project aims to understand particle focusing in inertial microfluidic systems to design efficient devices for cell sorting. The field of microfluidics could ultimately advance medical research but device design is primitive. Microfluidic particle separations are not thoroughly simulated before fabrication to predict performance. This project is expected to accelerate progress in design of efficient microfluidic devices. The knowledge and models developed in this project should help design and develop a microfluidic device for efficient fractionation of complex fluids into valuable components.Read moreRead less
Microstructural-Functional Effect of Silver Diammine Fluoride on Apatites. This project aims to develop a fundamental understanding at the nanostructural level of the factors that contribute to the enhanced mineralisation and mechanical properties of dentine and enamel following the treatment with silver diammine fluoride (SDF). A variety of advanced nanomechanical, tomographic and microscopic techniques will be used to characterise sound, carious and SDF treated tissue. The new biomechanical ev ....Microstructural-Functional Effect of Silver Diammine Fluoride on Apatites. This project aims to develop a fundamental understanding at the nanostructural level of the factors that contribute to the enhanced mineralisation and mechanical properties of dentine and enamel following the treatment with silver diammine fluoride (SDF). A variety of advanced nanomechanical, tomographic and microscopic techniques will be used to characterise sound, carious and SDF treated tissue. The new biomechanical evidence on the underlying mechanisms, alternative protocols, delivery systems enable to optimise the treatment. The scientific insights into arresting/repairing damage processes will provide critical data for developing minimal intervention protocols for pediatric and geriatric populations.Read moreRead less
Virtual testing of orthopaedic devices as part of the design and development process: strategies to account for patient and surgical variability. Novel computational tools will be developed through this project to help account for patient and surgical variability in the design of orthopaedic implants, such as hip and knee replacements and spinal products. These tools will reduce the design time, give greater insight in implant performance and ultimately lead to safer implants with improved longe ....Virtual testing of orthopaedic devices as part of the design and development process: strategies to account for patient and surgical variability. Novel computational tools will be developed through this project to help account for patient and surgical variability in the design of orthopaedic implants, such as hip and knee replacements and spinal products. These tools will reduce the design time, give greater insight in implant performance and ultimately lead to safer implants with improved longevity.Read moreRead less
Industrial Transformation Training Centres - Grant ID: IC160100026
Funder
Australian Research Council
Funding Amount
$3,722,989.00
Summary
ARC Training Centre in Additive Biomanufacturing. ARC Training Centre in Additive Biomanufacturing. The training centre aims to bring together leading researchers and industry to develop and translate key technology platforms for personalised treatments of challenging medical conditions. The centre expects its research will lead to synergistic and innovative technologies needed for personalised therapies including: modular additive biomanufacturing platforms; advanced bio-inks for regenerative m ....ARC Training Centre in Additive Biomanufacturing. ARC Training Centre in Additive Biomanufacturing. The training centre aims to bring together leading researchers and industry to develop and translate key technology platforms for personalised treatments of challenging medical conditions. The centre expects its research will lead to synergistic and innovative technologies needed for personalised therapies including: modular additive biomanufacturing platforms; advanced bio-inks for regenerative medicine; and additive manufactured tools for surgical planning and education. Highly experienced researchers and industry partners with teams of exceptional post-doctoral fellows and doctoral students would drive each technology. Anticipated impacts are that Australia will be a world-leader in additive biomanufacturing, and that the research will change the fields of science, health and biotechnology.Read moreRead less