Discovery Early Career Researcher Award - Grant ID: DE220101103
Funder
Australian Research Council
Funding Amount
$450,000.00
Summary
Giant piezo responses in rare-earth doped eco-friendly relaxor perovskites. This project aims to design and fabricate superior eco-friendly substitutions for lead-based perovskites widely used in piezoelectric devices, to address the long-standing toxic concern of lead for human beings and the environment in the community. It is expected to surmount the fundamental limit of current approaches to reach giant room-temperature piezoelectric responses in lead-free perovskites through using a pioneer ....Giant piezo responses in rare-earth doped eco-friendly relaxor perovskites. This project aims to design and fabricate superior eco-friendly substitutions for lead-based perovskites widely used in piezoelectric devices, to address the long-standing toxic concern of lead for human beings and the environment in the community. It is expected to surmount the fundamental limit of current approaches to reach giant room-temperature piezoelectric responses in lead-free perovskites through using a pioneering route named rare-earth doped relaxor/morphotropic phase boundary crossover. Success of this project will not only meet the Australia’s ecological sustainability goals, but also provide commercial opportunities for Australia in the large market of piezoelectric devices (> 25 Billion USD annually).Read moreRead less
New dielectric materials: Improving storage density of high temperature multilayer ceramic capacitors to sustainably meet future energy demands. Electrical energy generation from renewable sources, such as solar, wind and geothermal, provide enormous potential for meeting future energy demands. However, the ability to store and control this energy for miniaturisation and modularisation in applications requiring a wide temperature usage range is a limiting factor that needs to be addressed. This ....New dielectric materials: Improving storage density of high temperature multilayer ceramic capacitors to sustainably meet future energy demands. Electrical energy generation from renewable sources, such as solar, wind and geothermal, provide enormous potential for meeting future energy demands. However, the ability to store and control this energy for miniaturisation and modularisation in applications requiring a wide temperature usage range is a limiting factor that needs to be addressed. This project aims to develop new bismuth-based lead-free dielectric materials for improving the storage density of high temperature multilayer ceramic capacitors for sustainable applications in the energy and vehicle industries, where high temperature stability and high volumetric efficiency are crucial.Read moreRead less
High performance complex oxide heterostructures for nanoelectronic devices. This project aims to develop a material with ultrahigh electron mobility and conductivity well above today’s materials at room temperature to enable next generation nanoelectronics. The demand for higher performance and lower power consumption in electronic systems drives the creation of materials for devices in nanometre scale. The success of these materials depends on enhancement in carrier mobility and conductivity. T ....High performance complex oxide heterostructures for nanoelectronic devices. This project aims to develop a material with ultrahigh electron mobility and conductivity well above today’s materials at room temperature to enable next generation nanoelectronics. The demand for higher performance and lower power consumption in electronic systems drives the creation of materials for devices in nanometre scale. The success of these materials depends on enhancement in carrier mobility and conductivity. This project will spatially separate the electron generation layer from the conduction layer by individually engineering the atomically sharp complex oxide heterointerfaces to enhance the electron mobility and density. This is expected to develop new materials and nanoelectronic technologies.Read moreRead less
Thin combinatorial films for heat management in microelectronics. This project aims to provide a viable solution for heat management in microelectronics by using highly efficient Peltier devices made with thin combinatorial films. Heat generated by electric current, which is ubiquitous in microelectronic devices, has become increasingly problematic for high density charge-based logical circuitries. The project will significantly enhance the energy conversion efficiency of Peltier devices by opti ....Thin combinatorial films for heat management in microelectronics. This project aims to provide a viable solution for heat management in microelectronics by using highly efficient Peltier devices made with thin combinatorial films. Heat generated by electric current, which is ubiquitous in microelectronic devices, has become increasingly problematic for high density charge-based logical circuitries. The project will significantly enhance the energy conversion efficiency of Peltier devices by optimising the interdependent electron and phonon transports, simultaneously, with a new concept of thin combinatorial films for heat management in microelectronic devices. This is expected to facilitate the development of novel materials in Australia, with access to a large global market.Read moreRead less
Beyond Phononic Crystals-Building New Concepts to Enhance Thermoelectricity. Waste heat, which is discharged into the environment from industrial plants and vehicle exhausts, represents a huge amount of lost energy and is a major contributor to global warming. Thermoelectric materials, which can generate electricity from the waste heat, could play an important role in a global sustainable energy solution while reducing greenhouse emissions. This program is aimed at experimental and theoretical d ....Beyond Phononic Crystals-Building New Concepts to Enhance Thermoelectricity. Waste heat, which is discharged into the environment from industrial plants and vehicle exhausts, represents a huge amount of lost energy and is a major contributor to global warming. Thermoelectric materials, which can generate electricity from the waste heat, could play an important role in a global sustainable energy solution while reducing greenhouse emissions. This program is aimed at experimental and theoretical development of new concepts to engineer the interfaces with various atomic stacking sequence of two complex oxides and also the three-dimensional binary nanocube superlattices to enhance the energy conversion efficiency of oxide based thermoelectric materials by several times over today's state-of-the-art.Read moreRead less
Fatigue in Lead-free Piezoceramics. This project aims are to achieve a fundamental understanding of the fatigue behaviour of lead-free piezoelectric ceramics which achieve high strain through phase transformations and then ascertain the effects of this behaviour on material degradation rates. The expected outcomes will facilitate replacement of toxic lead in commodity electronics. The focus will be on new lead-free bismuth-alkali-based piezoelectric ceramic systems which demonstrate exciting pot ....Fatigue in Lead-free Piezoceramics. This project aims are to achieve a fundamental understanding of the fatigue behaviour of lead-free piezoelectric ceramics which achieve high strain through phase transformations and then ascertain the effects of this behaviour on material degradation rates. The expected outcomes will facilitate replacement of toxic lead in commodity electronics. The focus will be on new lead-free bismuth-alkali-based piezoelectric ceramic systems which demonstrate exciting potential as alternate materials to lead zirconate titanate (PZT) materials. Successful optimisation of the materials' design and knowledge of their degradation rates are expected to facilitate their commercialisation through a profound reduction in the environmental challenges associated with manufacture and disposal of devices.Read moreRead less
Development of advanced metal oxide materials for next generation nonvolatile memory devices. The purpose of the project is to explore a new memory technology, resistive random-access memory, that can be made smaller than those of today, as well as preferably being faster, power saving and nonvolatile. The project is expected to bring resistive random-access memory materials a step closer to nonvolatile memory devices application.
Engineered control of polarisation rotation in ferroelectric bilayers. This project aims to develop interface engineered nanoscale ferroelectric thin films with functional properties suitable for integration. Bulk ferroelectrics form the core of traditional stand-alone electromechanical devices such as sensors, actuators and ultrasonic devices. Future applications need to be integrated into thin film form on semiconductor wafers, but the attachment to the wafer induces a mechanical constraint, w ....Engineered control of polarisation rotation in ferroelectric bilayers. This project aims to develop interface engineered nanoscale ferroelectric thin films with functional properties suitable for integration. Bulk ferroelectrics form the core of traditional stand-alone electromechanical devices such as sensors, actuators and ultrasonic devices. Future applications need to be integrated into thin film form on semiconductor wafers, but the attachment to the wafer induces a mechanical constraint, which dramatically suppresses the electromechanical response. This project aims to solve this problem by "polarisation rotation", achieved by layered stacking of thin film ferroelectrics. Engineered control of ferroelectric polarization rotation could be the pathway to modern electromechanical devices.Read moreRead less
Design and exploration of novel p-block materials for visible light photocatalysis. This project aims to design and explore novel visible light p-block photocatalysts through in depth surface studies of materials at an atomic level. A new strategy of band structure engineering and in-situ investigation of atomic-level photocatalytic dynamics will be the key elements in this research which is expected to yield several novel visible light photocatalysts. The outcome of the project will be the unde ....Design and exploration of novel p-block materials for visible light photocatalysis. This project aims to design and explore novel visible light p-block photocatalysts through in depth surface studies of materials at an atomic level. A new strategy of band structure engineering and in-situ investigation of atomic-level photocatalytic dynamics will be the key elements in this research which is expected to yield several novel visible light photocatalysts. The outcome of the project will be the understanding of processes and mechanisms underlying the photocatalysis and building the foundation of usable, stable, and durable visible-light photocatalytic applications.Read moreRead less