CO2 Utilisation for Energy Storage. This project aims to develop a novel technology that can convert carbon dioxide into useful products while storing intermittent renewable energy as green stable chemical energy. The project plans to focus on the development of a robust cathode for the conversion of carbon dioxide with optimum physical and chemical structure to achieve long-term stable performance. This technology would make a significant contribution to increasing the proportion of renewable e ....CO2 Utilisation for Energy Storage. This project aims to develop a novel technology that can convert carbon dioxide into useful products while storing intermittent renewable energy as green stable chemical energy. The project plans to focus on the development of a robust cathode for the conversion of carbon dioxide with optimum physical and chemical structure to achieve long-term stable performance. This technology would make a significant contribution to increasing the proportion of renewable energy in our energy supply and reducing our carbon dioxide emissions.Read moreRead less
High purity formaldehyde production from carbon oxides. This project aims to investigate the detailed reaction mechanism of a green chemistry route of producing formaldehyde by reducing carbon monoxide and carbon dioxide in liquid phase. Formaldehyde is a widely used feedstock for chemical industries, but is not considered a green chemical because it is produced using natural gas as the feed, which loses over 61 per cent of energy. This project will maximise the yield and purity of the product, ....High purity formaldehyde production from carbon oxides. This project aims to investigate the detailed reaction mechanism of a green chemistry route of producing formaldehyde by reducing carbon monoxide and carbon dioxide in liquid phase. Formaldehyde is a widely used feedstock for chemical industries, but is not considered a green chemical because it is produced using natural gas as the feed, which loses over 61 per cent of energy. This project will maximise the yield and purity of the product, making it commercially viable. This project’s method for producing formaldehyde is expected to reduce the capital cost and energy losses.Read moreRead less
Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful ....Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful until carbon dioxide poisoning can be prevented. This project expects to make these LT-SOFC cathode materials commercially viable, solving a problem for the widespread use of low temperature solid oxide fuel cells.Read moreRead less
High Performance Anode for Direct Ammonia Solid Oxide Fuel Cells. Solid oxygen fuel cells are a clean energy generation device with very high energy efficiency and if with hydrogen as fuel, the emission is zero. However, the utilisation of hydrogen is limited by on-board storage. Ammonia is a promising hydrogen carrier and can be directly fed to solid oxide fuel cells without fuel storage problem, and the products are just hydrogen and nitrogen. For direct ammonia solid oxide fuel cells, the key ....High Performance Anode for Direct Ammonia Solid Oxide Fuel Cells. Solid oxygen fuel cells are a clean energy generation device with very high energy efficiency and if with hydrogen as fuel, the emission is zero. However, the utilisation of hydrogen is limited by on-board storage. Ammonia is a promising hydrogen carrier and can be directly fed to solid oxide fuel cells without fuel storage problem, and the products are just hydrogen and nitrogen. For direct ammonia solid oxide fuel cells, the key challenge is the anode. This project aims to develop a high performance anode for direct ammonia solid oxide fuel cells with both high activity and high stability at low temperature (below 600 degree C), thus addressing a key issue to make the direct ammonia solid oxide fuel cells commercially viable.Read moreRead less
Composites for thermal expansion matched oxygen electrodes. This project aims to develop high performance composite oxygen electrodes by using both negative thermal expansion materials and electrolyte materials to tailor the thermal expansion and activities of the perovskite-based electrodes for use in reduced temperature solid oxide cells. Such composite electrodes will show highly matched thermal expansion with electrolyte without sacrificing high activity at reduced temperatures. This project ....Composites for thermal expansion matched oxygen electrodes. This project aims to develop high performance composite oxygen electrodes by using both negative thermal expansion materials and electrolyte materials to tailor the thermal expansion and activities of the perovskite-based electrodes for use in reduced temperature solid oxide cells. Such composite electrodes will show highly matched thermal expansion with electrolyte without sacrificing high activity at reduced temperatures. This project seeks to address an important practical issue in the operation of solid oxide power cells - thermal expansion compatibility, which causes poor efficiency outside a narrow temperature band.Read moreRead less
All-solid-state Z-scheme photocatalysts for water treatment. The project aims to develop high-performance Z-scheme photocatalysts by using two-dimensional (2D) semiconductors as building blocks for low-cost, highly-efficient pathogen inactivation and emerging pollutant degradation in stormwater treatment. The project expects to generate new fundamental knowledge in the area of photocatalyst design and Z-scheme photocatalytic system, and advance the application of photocatalytic oxidation in wate ....All-solid-state Z-scheme photocatalysts for water treatment. The project aims to develop high-performance Z-scheme photocatalysts by using two-dimensional (2D) semiconductors as building blocks for low-cost, highly-efficient pathogen inactivation and emerging pollutant degradation in stormwater treatment. The project expects to generate new fundamental knowledge in the area of photocatalyst design and Z-scheme photocatalytic system, and advance the application of photocatalytic oxidation in water treatment. The expected outcomes of the project include novel 2D Z-scheme photocatalysts and enhanced capacity in stormwater management.Read moreRead less
Novel conversion process for carbon dioxide to chemicals. This project aims to develop a novel sorption enhanced material and system to convert atmospheric carbon dioxide (CO2) to methanol. Climate change is one of the primary long-term problems confronting humankind today. Since the production of CO2 through burning fossil fuel is far greater than the current usage of CO2, there is currently little alternative to storage. As a result, there is concerted effort globally to develop alternate use ....Novel conversion process for carbon dioxide to chemicals. This project aims to develop a novel sorption enhanced material and system to convert atmospheric carbon dioxide (CO2) to methanol. Climate change is one of the primary long-term problems confronting humankind today. Since the production of CO2 through burning fossil fuel is far greater than the current usage of CO2, there is currently little alternative to storage. As a result, there is concerted effort globally to develop alternate uses and conversion technologies for CO2. This project will help further this goal.Read moreRead less
A defect mechanism for oxygen reduction reaction. This project aims to use defective carbon to replace expensive platinum as a catalyst for oxygen reduction reaction (ORR) in fuel cells. Defective carbons incorporating non-precious metals are better than platinum in terms of over-potential, current density and number of electron transfer. They reduce the overall fuel cell cost but their better stability and higher open voltage and power density promise huge commercial benefit. This project is ex ....A defect mechanism for oxygen reduction reaction. This project aims to use defective carbon to replace expensive platinum as a catalyst for oxygen reduction reaction (ORR) in fuel cells. Defective carbons incorporating non-precious metals are better than platinum in terms of over-potential, current density and number of electron transfer. They reduce the overall fuel cell cost but their better stability and higher open voltage and power density promise huge commercial benefit. This project is expected to be important for large-scale implementation of fuel cells.Read moreRead less
Structurally designed catalysts for high-performance natural gas reforming. This project aims to develop a new class of highly stable catalysts with specially designed physical and chemical structures that can be used in high temperature chemical processes. These catalysts can potentially be used for the reforming of natural gas to produce the synthesis gas, which can then be used to produce liquid fuels and chemicals.
Cold catalysis for water splitting. This project aims to develop photocatalysts via AC magnetic field through nanoscale heating for efficient H2 generation. This project is to introduce cold catalysis concept, which heats catalysts only but not solution, thus called cold catalysis, in the area of production of renewable energy. Expected outcome is the creation of clean and low cost catalysts to effectively harvest the chemical energy from the sun via splitting of water into H2 and O2 without cau ....Cold catalysis for water splitting. This project aims to develop photocatalysts via AC magnetic field through nanoscale heating for efficient H2 generation. This project is to introduce cold catalysis concept, which heats catalysts only but not solution, thus called cold catalysis, in the area of production of renewable energy. Expected outcome is the creation of clean and low cost catalysts to effectively harvest the chemical energy from the sun via splitting of water into H2 and O2 without causing any environmental damage. This unique technology will also help to address clean energy generation, which is in line with H2 economy plan by Australia government, and provide opportunities for new industries that will benefit Australian economy.Read moreRead less