Development of new-generation autoclaved cellulose fibre-cement composites using alumina-silica rich industrial waste. Autoclaved cellulose fibre-cement (FC) composites are used for construction purposes globally. Alumina-silica rich industrial waste, such as fired clay bricks and tiles, are proven to be highly reactive under autoclaving conditions and are generated in abundance either during the production process or demolition of buildings worldwide. The project aims to utilise this renewable ....Development of new-generation autoclaved cellulose fibre-cement composites using alumina-silica rich industrial waste. Autoclaved cellulose fibre-cement (FC) composites are used for construction purposes globally. Alumina-silica rich industrial waste, such as fired clay bricks and tiles, are proven to be highly reactive under autoclaving conditions and are generated in abundance either during the production process or demolition of buildings worldwide. The project aims to utilise this renewable waste for the manufacture of improved FC products. The successful outcomes of the project could allow a new range of cost-effective building products which need less energy for their manufacture, to be realised for both developed and developing countries.Read moreRead less
New Generation Lead-free Piezoelectric Ceramics for Acoustic Sensor Technologies. Cooperative research between University of NSW and Thales Australia to design new Lead-free piezoceramics is of critical importance to Australia's strategic leadership in underwater acoustic technology. This area has been identified by the Department of Defence to be a critical defence capability and essential to Australia's exploration of oil, gas, and minerals. Improved and new transducer components will provide ....New Generation Lead-free Piezoelectric Ceramics for Acoustic Sensor Technologies. Cooperative research between University of NSW and Thales Australia to design new Lead-free piezoceramics is of critical importance to Australia's strategic leadership in underwater acoustic technology. This area has been identified by the Department of Defence to be a critical defence capability and essential to Australia's exploration of oil, gas, and minerals. Improved and new transducer components will provide significant economic benefit to Australia through increased export of sonar technology, particularly to Europe and all Restriction of Hazardous Substances (RoHS) compliant countries. The project will produce highly skilled graduates ensuring an on-going basis for Australia's future innovation in this area.Read moreRead less
Advanced shield materials for compact fusion energy. We aim to predict how materials used for shielding sensitive components in nuclear fusion reactors will degrade over time. We will use this knowledge to design advanced alloys for radiation shield, which are critical for the development of more compact fusion reactors design, with lower construction cost, and shorter assembly time. These advanced shield materials may also be used in other applications in radiation fields (e.g. space, nuclear m ....Advanced shield materials for compact fusion energy. We aim to predict how materials used for shielding sensitive components in nuclear fusion reactors will degrade over time. We will use this knowledge to design advanced alloys for radiation shield, which are critical for the development of more compact fusion reactors design, with lower construction cost, and shorter assembly time. These advanced shield materials may also be used in other applications in radiation fields (e.g. space, nuclear medicine). The project also seeks to extend the Australian nuclear research capability by developing an innovative technique to study radiation damage using the OPAL reactor at ANSTO.Read moreRead less
Low-density high-performance proppants for hydraulic fracturing process . Australia has vast resources of unconventional oil/gas, which require hydraulic fracturing to stimulate production. This project aims to develop advanced low-density high-performance proppants from industry waste for hydraulic fracturing. This will be achieved by selecting purer SiO2 raw material, carefully designing the porous structure, and fully understanding its relationship with strength and pack conductivity. Low-den ....Low-density high-performance proppants for hydraulic fracturing process . Australia has vast resources of unconventional oil/gas, which require hydraulic fracturing to stimulate production. This project aims to develop advanced low-density high-performance proppants from industry waste for hydraulic fracturing. This will be achieved by selecting purer SiO2 raw material, carefully designing the porous structure, and fully understanding its relationship with strength and pack conductivity. Low-density means no chemicals in proppant transportation and application. Successful development of such high-performance proppants will significantly increase Australia oil/gas exploration and production with an environmental acceptable technology, a leap forward for the oil/gas industry in Australia and the world.Read moreRead less
Tailoring the microwave dielectric properties of promising electroceramics for use in wireless telecommunication components and devices. This project aims to develop and tailor the microwave dielectric properties of promising electroceramic materials specifically targeting next generation wireless telecommunications applications. The partnership between the ANU and the Australian company Microwave and Materials Designs has the potential to enable new microwave electroceramic materials to be disc ....Tailoring the microwave dielectric properties of promising electroceramics for use in wireless telecommunication components and devices. This project aims to develop and tailor the microwave dielectric properties of promising electroceramic materials specifically targeting next generation wireless telecommunications applications. The partnership between the ANU and the Australian company Microwave and Materials Designs has the potential to enable new microwave electroceramic materials to be discovered and then incorporated into new microwave components and/or devices developed in response to the requirements of the international wireless telecommunications market. The requested PhD student will gain experience in both the industrial and academic worlds and the skills needed to be part of Australia's high-tech workforce. Read moreRead less
Investigation of novel magneto-optic materials exhibiting high Faraday figure of merit. Magneto-optical materials have a wide range of potential applications in consumer products, telecommunications and defence. Nanotechnologies based on these materials offer an even broader range of emerging applications. Understanding and participating in the development of magneto-optic technologies will therefore be critical to maintaining Australia's knowledge base and expertise in future technological adv ....Investigation of novel magneto-optic materials exhibiting high Faraday figure of merit. Magneto-optical materials have a wide range of potential applications in consumer products, telecommunications and defence. Nanotechnologies based on these materials offer an even broader range of emerging applications. Understanding and participating in the development of magneto-optic technologies will therefore be critical to maintaining Australia's knowledge base and expertise in future technological advances. Given the early stages of development of these technologies, Australia's expertise in material science and the patent rights held by Australian companies in this area, Australia has the opportunity to make major contributions to this field, and the potential to capitalise on the application of these technologies in niche markets.Read moreRead less
Fibre-reinforced composites: Single-crystal mullite fibres from topaz. The project aims to develop the means of fabricating single-crystal mullite fibres from topaz that are suitable for reinforcement of metal and ceramic matrix composites. Single-crystal mullite is the most sought after fibrous additive, but is not available commercially. It is expected to attract an immediate clientele in laboratories and companies servicing the aviation industry and the military. This will allow large depos ....Fibre-reinforced composites: Single-crystal mullite fibres from topaz. The project aims to develop the means of fabricating single-crystal mullite fibres from topaz that are suitable for reinforcement of metal and ceramic matrix composites. Single-crystal mullite is the most sought after fibrous additive, but is not available commercially. It is expected to attract an immediate clientele in laboratories and companies servicing the aviation industry and the military. This will allow large deposit of topaz in Torrington, NSW to be used to develop a high-value niche product (fibres) and a large-volume, low-value product (fluoride). This will provide significant economic and environmental benefits and it addresses the research priorities - Resources and Advanced Manufacturing.Read moreRead less
New Paradigm for Materials Technology for AZS Glassmaking Refractories. The project aims to enable the inexpensive manufacture of widely used refractories with reduced energy and materials costs and improved thermal and mechanical properties. The project plans to exploit technology patented by the researchers to fabricate percolated mullite materials from fly ash by sintering, yielding properties equivalent or superior to those of fuse-cast alumina-zirconia-silica refractories (AZS). AZS is expe ....New Paradigm for Materials Technology for AZS Glassmaking Refractories. The project aims to enable the inexpensive manufacture of widely used refractories with reduced energy and materials costs and improved thermal and mechanical properties. The project plans to exploit technology patented by the researchers to fabricate percolated mullite materials from fly ash by sintering, yielding properties equivalent or superior to those of fuse-cast alumina-zirconia-silica refractories (AZS). AZS is expensive since it requires melting by fuse-casting and high-purity raw materials. The project aims to eliminate both requirements by sintering and use of waste fly ash, giving microstructures of dense, direct-bonded, percolated, mullite, single crystals, with residual impurities in the interstices that do not affect creep.Read moreRead less
Concentrating solar thermal energy storage using metal hydrides. This project will investigate energy storage for concentrating solar thermal energy systems. These systems can be used to efficiently generate electricity in remote locations, day and night, using solar energy. The solar energy is converted to heat energy and then chemical energy stored in a metal-hydrogen compound.
Enhanced pigment weathering resistance by coating with high dielectric ceramic. The partner company, Tiwest, based in Western Australia, is a major contributor to the economy, and earns more than $A400m annually in exports. It is the only company in the world that mines, separates, refines and manufactures titania products, including pigments, in one region. The current post-titania particle formation wet-coating process, however, presents a major capital and recurrent cost and necessitates a pi ....Enhanced pigment weathering resistance by coating with high dielectric ceramic. The partner company, Tiwest, based in Western Australia, is a major contributor to the economy, and earns more than $A400m annually in exports. It is the only company in the world that mines, separates, refines and manufactures titania products, including pigments, in one region. The current post-titania particle formation wet-coating process, however, presents a major capital and recurrent cost and necessitates a pigment regrind stage. The research will investigate the development of a highly durable dry-coated pigment utilising a novel high dielectric coating. This development has the potential to ensure the partner company's future competitiveness through reduced processing costs and improved product performance.Read moreRead less