Carbon-Supported Iron Catalysts for Selective Catalytic Reduction of NO. Nitric oxide (NO) is a major pollutant from combustion systems. This project aims to develop cost-effective and environmentally benign zerovalent iron catalysts supported on carbon material for selective catalytic reduction (SCR) of NO using CO and unburned hydrocarbons as in-situ reductants. By applying differential reactor experimentation, kinetic modelling and advanced material characterisation techniques, the research w ....Carbon-Supported Iron Catalysts for Selective Catalytic Reduction of NO. Nitric oxide (NO) is a major pollutant from combustion systems. This project aims to develop cost-effective and environmentally benign zerovalent iron catalysts supported on carbon material for selective catalytic reduction (SCR) of NO using CO and unburned hydrocarbons as in-situ reductants. By applying differential reactor experimentation, kinetic modelling and advanced material characterisation techniques, the research will unravel complex relationships among catalyst structural features and activity, NO reduction mechanisms, and catalyst performance under practically relevant combustion conditions that underpin the development of an effective yet affordable SCR technology to control NO emission from industrial utilities and automobiles.Read moreRead less
Optimising biodegradation and removal of organic and inorganic pollutants in wastewater using constructed wetlands. The urgency of water recycling is dictated by drying climate and rapid expansion of population in Australia. Constructed wetlands are environmentally-benign way to purify wastewater by removing inorganics and facilitating biodegradation of organic pollutants, thus producing recycled water that can be used in a variety of fit-for-purpose applications. This project will produce a dec ....Optimising biodegradation and removal of organic and inorganic pollutants in wastewater using constructed wetlands. The urgency of water recycling is dictated by drying climate and rapid expansion of population in Australia. Constructed wetlands are environmentally-benign way to purify wastewater by removing inorganics and facilitating biodegradation of organic pollutants, thus producing recycled water that can be used in a variety of fit-for-purpose applications. This project will produce a decision-support system for optimising wetland performance in removing inorganics and biodegrading organic pollutants from wastewater, thus enhancing water recycling and reuse in this drying continent of ours.Read moreRead less
Improved control of dioxin emissions during iron ore sintering. This project aims to develop an innovative assessment of dioxin formation through analysis and speciation of its precursors (Cl and Cu). Iron ore sintering is the industrial process with the highest emissions of dioxins and furans to the environment in Australia, which are amongst the most toxic substances produced by man. The aim of this project is to conduct critical investigations required for control of dioxin emissions during i ....Improved control of dioxin emissions during iron ore sintering. This project aims to develop an innovative assessment of dioxin formation through analysis and speciation of its precursors (Cl and Cu). Iron ore sintering is the industrial process with the highest emissions of dioxins and furans to the environment in Australia, which are amongst the most toxic substances produced by man. The aim of this project is to conduct critical investigations required for control of dioxin emissions during iron ore sintering. The expected outcome of this project is the development of control mechanisms for the process conditions responsible for dioxin formation. This should provide significant benefits, such as assisting the Australian iron ore industry to address the environmental requirements of their international trade partners and sustain their iron ore exports.Read moreRead less
Optimal management of corrosion and odour problems in sewer systems. Pollutants in wastewater undergo complex changes in sewers, leading to the production and release of odorous and corrosive compounds. Despite major efforts and expenditure by water utilities to mitigate these problems, odorous emissions from sewers are still commonly occurring in urban areas. Furthermore, the value of public assets is significantly diminished due to sewer corrosion, costing hundreds of millions of dollars a yea ....Optimal management of corrosion and odour problems in sewer systems. Pollutants in wastewater undergo complex changes in sewers, leading to the production and release of odorous and corrosive compounds. Despite major efforts and expenditure by water utilities to mitigate these problems, odorous emissions from sewers are still commonly occurring in urban areas. Furthermore, the value of public assets is significantly diminished due to sewer corrosion, costing hundreds of millions of dollars a year in Australia alone. This project is a major joint effort by the Australian water industry and world-leading scientists to generate advanced knowledge and develop effective technologies for optimal odour and corrosion management in sewers, delivering large social, environmental and economic benefits.Read moreRead less
Understanding and mitigating nitrous oxide emission from wastewater treatment plants. Climate change caused by greenhouse gas emissions is one of the most serious challenges that mankind is facing. Substantial reduction in emissions must be achieved, with responsibility to be shared by all industrial sectors. Wastewater systems contribute to greenhouse gas emissions through not only energy consumptions but also direct emissions of fugitive greenhouse gases such as nitrous oxide. This project aim ....Understanding and mitigating nitrous oxide emission from wastewater treatment plants. Climate change caused by greenhouse gas emissions is one of the most serious challenges that mankind is facing. Substantial reduction in emissions must be achieved, with responsibility to be shared by all industrial sectors. Wastewater systems contribute to greenhouse gas emissions through not only energy consumptions but also direct emissions of fugitive greenhouse gases such as nitrous oxide. This project aims to provide knowledge and technology support to the Australian wastewater industry to minimize the emission of nitrous oxide during biological nitrogen removal from wastewater. This is critically important for this industry to achieve greenhouse gas neutral wastewater management.Read moreRead less
Sewer corrosion reduction through model-supported ventilation control. Ventilation is one of the key technologies for sewer corrosion control. However, its design and operation are currently based on experience and empirical equations, often leading to unsatisfactory results. By integrating in-depth laboratory and pilot-sewer studies under defined conditions with extensive field investigations, this multidisciplinary project aims to develop critical models to predict the corrosion process in res ....Sewer corrosion reduction through model-supported ventilation control. Ventilation is one of the key technologies for sewer corrosion control. However, its design and operation are currently based on experience and empirical equations, often leading to unsatisfactory results. By integrating in-depth laboratory and pilot-sewer studies under defined conditions with extensive field investigations, this multidisciplinary project aims to develop critical models to predict the corrosion process in response to ventilation and dynamic wastewater and atmospheric conditions, enabling model-based sewer ventilation design and operation. The project also aims to deliver novel, field-demonstrated ventilation strategies. The project findings will be incorporated in the Australian ventilation design and operation guidelines.Read moreRead less
Measurement of the spatial distribution of temperature and velocity in lakes using Acoustic Tomography. This project will investigate the use of acoustic tomography in lakes to continuously measure the lake-wide distribution of temperature and velocity. The challenges with lake acoustic tomography are the accuracy required in the travel time measurements over shorter distances, acoustic losses due to reflections and ensuring enough rays travel through the thermocline, the region of greatest inte ....Measurement of the spatial distribution of temperature and velocity in lakes using Acoustic Tomography. This project will investigate the use of acoustic tomography in lakes to continuously measure the lake-wide distribution of temperature and velocity. The challenges with lake acoustic tomography are the accuracy required in the travel time measurements over shorter distances, acoustic losses due to reflections and ensuring enough rays travel through the thermocline, the region of greatest interest in lakes. A pilot experiment in a deep lake will investigate the quality of travel time measurements computed from rays travelling through the thermocline of a strongly stratified lake. This has wide applications for the water quality management of lakes and reservoirs.Read moreRead less
Methane and nitrous oxide emissions from sewers – understanding, modelling and mitigation. The research and industry partners will collaborate on this project to quantify, understand and mitigate emissions of methane and nitrous oxide in sewer networks. Both methane and nitrous oxide are potent greenhouse gases, and their emissions need to be accounted for and mitigated for the water industry to achieve greenhouse neutral water services.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0775548
Funder
Australian Research Council
Funding Amount
$180,000.00
Summary
Advanced characterisation facilities for functional nanostructured materials. A critical factor that enhances frontier research is a set of advanced core research experimental facilities for material characterisation purposes. The proposed equipment aims to: (1) provide research facilities for advanced nanomaterial research; (2) improve national competitiveness and growth in a knowledge-based economy; and (3) foster local talented researchers in order to meet the strategic needs of the nation fo ....Advanced characterisation facilities for functional nanostructured materials. A critical factor that enhances frontier research is a set of advanced core research experimental facilities for material characterisation purposes. The proposed equipment aims to: (1) provide research facilities for advanced nanomaterial research; (2) improve national competitiveness and growth in a knowledge-based economy; and (3) foster local talented researchers in order to meet the strategic needs of the nation for a sustainable environment. These activities will revitalise Australia's leading role in creating new technologies with particular relevance to using advanced nanostructures for the production of clean air and water, and sustainable energy alternatives.Read moreRead less
Assessment of the Mass Flux in a Benthic Boundary Layer of a Stratified Lake. Understanding the underlying processes responsible for Benthic Bundary Layer (BBL) mass flux in stratified lakes is of fundamental ecological importance. By verifying the ability of the current Centre for Water Research hydrodynamics models to reproduce the dynamics of the BBL, Australia will cement its position as an international leader in the development of technologies to guide the management of lakes, reservoirs, ....Assessment of the Mass Flux in a Benthic Boundary Layer of a Stratified Lake. Understanding the underlying processes responsible for Benthic Bundary Layer (BBL) mass flux in stratified lakes is of fundamental ecological importance. By verifying the ability of the current Centre for Water Research hydrodynamics models to reproduce the dynamics of the BBL, Australia will cement its position as an international leader in the development of technologies to guide the management of lakes, reservoirs, estuaries and coastal areas. Furthermore, these water bodies are important sources and sinks of carbon and the extent to which they contribute to the national and international carbon inventory can be assessed using this technology.Read moreRead less