Promoting active travel and public transport for a post-pandemic world. In many major cities, COVID-19 stimulated the provision of open streets, pop up bike lanes and widened pedestrian access, prompting unprecedented increases cycling and walking. While this type of infrastructure has always been supported by urban planners and designers, the pandemic has served as a vital inflection point, enabling cities to pursue long-term sustainable transport initiatives, including investment in Active Tra ....Promoting active travel and public transport for a post-pandemic world. In many major cities, COVID-19 stimulated the provision of open streets, pop up bike lanes and widened pedestrian access, prompting unprecedented increases cycling and walking. While this type of infrastructure has always been supported by urban planners and designers, the pandemic has served as a vital inflection point, enabling cities to pursue long-term sustainable transport initiatives, including investment in Active Travel (AT). There is an opportunity to promote AT as part of an integrated transport strategy, and to develop tools for the robust evaluation of AT impacts to inform future investment strategies. This proposal will provide our partner organisation Transport for New South Wales (with the knowledge required to achieve this.
Read moreRead less
Fluid-thermal-structural interactions on high-speed aerospace vehicles. Sixteen years after the retirement of Concorde, high-speed commercial flight is once again on the rise with the development of new supersonic business jets and small airliners as well as hypersonic transport and reusable space launch systems. Robust and efficient designs for these light-weight vehicles must address the problem of aerodynamic heating and its effect on structural performance and lifing. This project will desig ....Fluid-thermal-structural interactions on high-speed aerospace vehicles. Sixteen years after the retirement of Concorde, high-speed commercial flight is once again on the rise with the development of new supersonic business jets and small airliners as well as hypersonic transport and reusable space launch systems. Robust and efficient designs for these light-weight vehicles must address the problem of aerodynamic heating and its effect on structural performance and lifing. This project will design and perform first-of-kind experiments that reproduce the complex fluid-thermal-structural interactions representative of those experienced by these aircraft and rockets. We will then use these measurements to assess, validate and improve the current state-of-the-art of simulation and modelling approaches for design.Read moreRead less
Dispersion of spacecraft components during re-entry. Destructive re-entry trajectories for used satellites are designed so debris remaining after re-entry falls harmlessly to the Earth. However, the dramatic increase in the mass of orbiting objects has outpaced improvements in predicting hazardous impact zones. This project aims to develop the experimental and theoretical methods needed to study separation of objects in hypersonic flow in order to better predict the dispersion of debris from re- ....Dispersion of spacecraft components during re-entry. Destructive re-entry trajectories for used satellites are designed so debris remaining after re-entry falls harmlessly to the Earth. However, the dramatic increase in the mass of orbiting objects has outpaced improvements in predicting hazardous impact zones. This project aims to develop the experimental and theoretical methods needed to study separation of objects in hypersonic flow in order to better predict the dispersion of debris from re-entering space objects. New hypersonic wind tunnel experiments, modelling, and computational simulations will be performed to enhance our understanding and improve predictions of how spacecraft components are dispersed during re-entry.Read moreRead less
Ship response under corrosion, fatigue and complex sea-state environments. This project will improve understanding of the gradual deterioration of ships and maritime structures subject to metal corrosion, fatigue and extreme sea-state conditions. Increasingly such understanding is necessary for optimal asset management decisions. These include the potential economic, personnel and other risks involved for ship owners and operators, including the Royal Australian Navy (RAN). The project will use ....Ship response under corrosion, fatigue and complex sea-state environments. This project will improve understanding of the gradual deterioration of ships and maritime structures subject to metal corrosion, fatigue and extreme sea-state conditions. Increasingly such understanding is necessary for optimal asset management decisions. These include the potential economic, personnel and other risks involved for ship owners and operators, including the Royal Australian Navy (RAN). The project will use numerical simulation. It will tackle the Fluid-Structure Interaction problem of ships in waves by integrating Finite Element structural response analysis with cutting-edge Smoothed Particle Hydrodynamics methods. The outcomes will provide new insight into remaining asset life and for exploring optimal maintenance strategiesRead moreRead less
Wind Tunnel Testing of a Hypersonic Plasma Engine. This project intends to evaluate an electric engine that is capable of speeds in excess of 10000 km/hr, for access to space and responsive surveillance in our region. The expertise of Lockheed Martin, Lockheed Martin Australia, the University of Qld and DST Group are to be combined to complete experimental and theoretical evaluations of an air-breathing plasma engine that is capable of out-performing rockets and scramjets. US Air Force Research ....Wind Tunnel Testing of a Hypersonic Plasma Engine. This project intends to evaluate an electric engine that is capable of speeds in excess of 10000 km/hr, for access to space and responsive surveillance in our region. The expertise of Lockheed Martin, Lockheed Martin Australia, the University of Qld and DST Group are to be combined to complete experimental and theoretical evaluations of an air-breathing plasma engine that is capable of out-performing rockets and scramjets. US Air Force Research Laboratory results will also be compared and shared. This project provides opportunities for young Australian researchers to be participate and lead an exciting new field of propulsion. It is anticipated that the program will be the foundations to future flight demonstrations from Woomera, Australia.Read moreRead less
Electron Transpiration Cooling of Hypersonic Vehicles. Future aircraft for flight at hypersonic speeds require sharp leading edges for the best aerodynamic performance. Sharp leading edges incur high heat loads and cannot be adequately cooled with current technologies. The project aim is to investigate novel surface materials that emit electrons when heated. This emission of electrons from the surface can significantly contribute to the cooling of the sharp leading edges. This project is expecte ....Electron Transpiration Cooling of Hypersonic Vehicles. Future aircraft for flight at hypersonic speeds require sharp leading edges for the best aerodynamic performance. Sharp leading edges incur high heat loads and cannot be adequately cooled with current technologies. The project aim is to investigate novel surface materials that emit electrons when heated. This emission of electrons from the surface can significantly contribute to the cooling of the sharp leading edges. This project is expected to deliver new experimental data on novel surface materials exposed to a hypersonic flow environment and computer models that can simulate their cooling effect. This investigation will contribute towards enabling technologies for sustained hypersonic flight by overcoming critical head load limitations.Read moreRead less
Plasma touches life: advancing plasma technologies for the life sciences. The aim of this project is to develop a mechanistic understanding of how electrically excited gas (plasma) jets deliver reactive oxygen and nitrogen species into tissue, ensuring safety and precision in their use to combat disease. Overcoming barriers in delivery is intended to help realise the full potential of plasma in the life sciences. The project is expected to generate new knowledge across physics, chemistry and bio ....Plasma touches life: advancing plasma technologies for the life sciences. The aim of this project is to develop a mechanistic understanding of how electrically excited gas (plasma) jets deliver reactive oxygen and nitrogen species into tissue, ensuring safety and precision in their use to combat disease. Overcoming barriers in delivery is intended to help realise the full potential of plasma in the life sciences. The project is expected to generate new knowledge across physics, chemistry and biology, leading to new approaches for the future development of plasma technologies. This should provide significant benefits by expanding the human capacity of research in plasma, and in growing the advanced manufacturing of plasma devices for future applications in engineering, biology and health.Read moreRead less
Optimising lasers for ablation of structurally complex solid non-metals. This project aims to take the latest developments in fibre laser technology to create a new ablation system for precision cutting and reshaping of structurally complex non-metal materials. Fibre lasers provide high quality beams, high average power, and precise pulse timing. Guided by the composition of the material and its response to incident mid-infrared light, the project will create a tailored laser beam to provide ac ....Optimising lasers for ablation of structurally complex solid non-metals. This project aims to take the latest developments in fibre laser technology to create a new ablation system for precision cutting and reshaping of structurally complex non-metal materials. Fibre lasers provide high quality beams, high average power, and precise pulse timing. Guided by the composition of the material and its response to incident mid-infrared light, the project will create a tailored laser beam to provide accurate and high-rate ablation. The expected outcomes include minimal damage to the surrounding area and a level of precision not possible with any mechanical alternative. The project will provide long term benefits to the aerospace and healthcare industries and, be a boost to Australia’s manufacturing sector.Read moreRead less
Airborne ultrafine particles in Australian cities. There is an acute deficiency of knowledge in Australia on urban airborne ultrafine particles, originating from transport and other anthropogenic sources, which pose significant health and environmental risks. The aim of this project is to address this deficiency by an extensive multi-city, cross-disciplinary study using state of the art instrumentation and data analytic techniques. The outcome will be an in depth, quantitative insight into the c ....Airborne ultrafine particles in Australian cities. There is an acute deficiency of knowledge in Australia on urban airborne ultrafine particles, originating from transport and other anthropogenic sources, which pose significant health and environmental risks. The aim of this project is to address this deficiency by an extensive multi-city, cross-disciplinary study using state of the art instrumentation and data analytic techniques. The outcome will be an in depth, quantitative insight into the characteristics of the particles, their sources and spatial and temporal variation across different urban areas and time scales. Further, the impacts of changing fuels, vehicle technologies, and climate on future trends of the particles will be elucidated.Read moreRead less
Development of Novel Concrete Noise Walls Incorporating Recycled Materials. This project will develop high-performance, lightweight, concrete noise walls and acoustic barriers that use recycled tyre and glass products to improve sound absorption, and address environmental problems associated with the mining of river sands, and stockpiling of waste tyre and glass products. Innovation in noise wall technology consists in developing low-carbon concrete mixes (using less cement) with a maximum amoun ....Development of Novel Concrete Noise Walls Incorporating Recycled Materials. This project will develop high-performance, lightweight, concrete noise walls and acoustic barriers that use recycled tyre and glass products to improve sound absorption, and address environmental problems associated with the mining of river sands, and stockpiling of waste tyre and glass products. Innovation in noise wall technology consists in developing low-carbon concrete mixes (using less cement) with a maximum amount of recycled product, together with reducing wall thickness, while maintaining the necessary engineering properties such as acoustics, strength, and durability. In addition to higher acoustic insulation, the novel low-carbon, lightweight, panels will improve material handling and affordability of noise barriers.Read moreRead less