A New Generic Approach for Assessing Blast Effects on Reinforced Concrete Members. A framework allow for both flexural and shear response analysis using a new segmental approach is developed in this proposal. A blast test program is designed to validate the framework for reinforced concrete members. The validated framework is then used to derive normalised pressure impulse programs for reinforced members in unconfined and confined spaces. This project will provide design engineers guidelines for ....A New Generic Approach for Assessing Blast Effects on Reinforced Concrete Members. A framework allow for both flexural and shear response analysis using a new segmental approach is developed in this proposal. A blast test program is designed to validate the framework for reinforced concrete members. The validated framework is then used to derive normalised pressure impulse programs for reinforced members in unconfined and confined spaces. This project will provide design engineers guidelines for reliably and quickly assessing the effect of different kinds of blast loads on different types and properties and geometries of reinforced concrete structural members, saving computation time and efforts while providing increased realism and accuracy.Read moreRead less
Cost Effective Pipeline Condition Assessment Using Paired Pressure Sensor Arrays. Water distribution networks represent society's most important infrastructure asset. They are buried pipes and are often old and deteriorating. Cost-effective methods to assess their physical condition are urgently needed. This research will develop a novel and advanced approach to determine the interior condition of pipes quickly and effectively using small water hammer pulses or waves. Paired pressure sensor arra ....Cost Effective Pipeline Condition Assessment Using Paired Pressure Sensor Arrays. Water distribution networks represent society's most important infrastructure asset. They are buried pipes and are often old and deteriorating. Cost-effective methods to assess their physical condition are urgently needed. This research will develop a novel and advanced approach to determine the interior condition of pipes quickly and effectively using small water hammer pulses or waves. Paired pressure sensor arrays will be used to measure reflections of the waves in pipes and these methods will enable finer resolution and identification of pipeline faults, such as wall thickness loss and leakage while at the same time allowing operational continuity. The outcome will be powerful tools to more cost effectively manage these crucial assets.Read moreRead less
High-resolution pipeline condition assessment using hydraulic transients. This project aims to develop urgently needed non-invasive methods to assess fine detail of a pipe’s condition and allow ‘just in time’ predictive repair. Water distribution networks are society's most important infrastructure asset. They consist of buried pipes that are often old and deteriorating, and annual maintenance overhead exceeds $1 billion per year in Australia alone. The project will develop cost-effective powerf ....High-resolution pipeline condition assessment using hydraulic transients. This project aims to develop urgently needed non-invasive methods to assess fine detail of a pipe’s condition and allow ‘just in time’ predictive repair. Water distribution networks are society's most important infrastructure asset. They consist of buried pipes that are often old and deteriorating, and annual maintenance overhead exceeds $1 billion per year in Australia alone. The project will develop cost-effective powerful tools to identify faults, such as pipe wall corrosion and blockages, while allowing operational continuity. The expected outcome is high-resolution images of wall condition of pipes using high-frequency pressure transients and sophisticated fibre optic sensor arrays.Read moreRead less
Next-generation smart water network for performance-driven asset management. This project aims to develop smart water network systems and techniques for continuous monitoring and early detection of structural failure in water distribution systems. Water assets are critical infrastructure, and they consist of a network of buried pipes that are old and deteriorating, with an annual maintenance overhead exceeding $1billion per year in Australia. This project is expected to deliver next-generation s ....Next-generation smart water network for performance-driven asset management. This project aims to develop smart water network systems and techniques for continuous monitoring and early detection of structural failure in water distribution systems. Water assets are critical infrastructure, and they consist of a network of buried pipes that are old and deteriorating, with an annual maintenance overhead exceeding $1billion per year in Australia. This project is expected to deliver next-generation smart water technology that enables continuous assessment of the actual performance of water pipe networks, guide “just in time” pipe replacement and optimise operations. This technology will assist asset managers to make informed decisions, strategically prioritise investment and extend asset life.Read moreRead less
Smart Pipe Condition Assessment in Water Distribution Systems. The project aims to develop an urgently needed smart pipe fault diagnosis, characterisation and prognosis system. Analysis techniques will be used for the detailed mapping of buried pipe condition between access points using micro-sized transient pressure waves. Water assets are critical infrastructure and they consist of a network of pipes that are often old and deteriorating. The annual maintenance cost exceeds $1b per year in Aus ....Smart Pipe Condition Assessment in Water Distribution Systems. The project aims to develop an urgently needed smart pipe fault diagnosis, characterisation and prognosis system. Analysis techniques will be used for the detailed mapping of buried pipe condition between access points using micro-sized transient pressure waves. Water assets are critical infrastructure and they consist of a network of pipes that are often old and deteriorating. The annual maintenance cost exceeds $1b per year in Australia. The outcome will be a next-generation tool that allows water utilities to move from reactive emergency repairs to proactive repair and predictive replacement. This will enable performance-driven asset management, extending asset life and replacing deteriorated high-risk pipe sections in a timely manner.Read moreRead less
Reducing the Risk of Foundation Failures by Improving the Effectiveness of Geotechnical Investigations. Inadequate geotechnical site investigation is the major factor in construction overruns and delays. In some instances failure may occur. Alternatively, such investigation may result in over-designed foundations. This research will examine these issues through sites, based on numerical simulations of variable soil conditions and investigations. Case studies will be used to verify the modelling. ....Reducing the Risk of Foundation Failures by Improving the Effectiveness of Geotechnical Investigations. Inadequate geotechnical site investigation is the major factor in construction overruns and delays. In some instances failure may occur. Alternatively, such investigation may result in over-designed foundations. This research will examine these issues through sites, based on numerical simulations of variable soil conditions and investigations. Case studies will be used to verify the modelling. A practical framework for planning and implementing geotechnical investigations, based on the variability of the soil profile will be developed. A key aspect of this framework is that, for the first time, site investigations will be linked to risk of foundation failure and cost of overdesign.Read moreRead less
Fibre reinforced polymer retrofitting of reinforced concrete flexural members. A cost-effective and durable technique for retrofitting reinforced concrete beams and slabs is to adhesively bond new advanced fibre reinforced polymer (FRP) composites to their surfaces. The potential plating market in Australia for bridges is $350 million, however, the technique can also be applied to strengthening other structures such as buildings. Tests have shown that FRP plates or sheets can debond prematurely, ....Fibre reinforced polymer retrofitting of reinforced concrete flexural members. A cost-effective and durable technique for retrofitting reinforced concrete beams and slabs is to adhesively bond new advanced fibre reinforced polymer (FRP) composites to their surfaces. The potential plating market in Australia for bridges is $350 million, however, the technique can also be applied to strengthening other structures such as buildings. Tests have shown that FRP plates or sheets can debond prematurely, which at present severely limits the application. The aim of this research project is to quantify the debonding mechanisms, strengths and ductilities of adhesively bonded FRP plated beams to provide design rules that can be used in practice.Read moreRead less
Understanding vibratory piles in sand: installation and lateral response. This project aims to address uncertainties in the design of vibro-driven piles. This promising alternative to impact-driven piles offers faster installation and requires no noise mitigation. The project expects to generate new knowledge of the effect of the installation process in sand on in-service pile response by integrating findings from innovative experiments and numerical modelling. This is particularly important for ....Understanding vibratory piles in sand: installation and lateral response. This project aims to address uncertainties in the design of vibro-driven piles. This promising alternative to impact-driven piles offers faster installation and requires no noise mitigation. The project expects to generate new knowledge of the effect of the installation process in sand on in-service pile response by integrating findings from innovative experiments and numerical modelling. This is particularly important for highly sensitive structures such as offshore wind turbines, which provide a rapidly increasing share of global energy supply. Expected outcomes include practical recommendations for vibro-piles in sand. This should provide sizeable benefits by unlocking vibro-piles as a viable method to reduce offshore wind farm costs.Read moreRead less
Earthquake protection of masonry buildings using fibre reinforced polymer strengthening. The importance of this research is highlighted, both nationally and internationally, by the work of the insurance industry which reported that the economic risk posed by a moderate earthquake in any of the capital cities in Australia is of the order of billions of dollars (Blong, 1993). For example, a 'design magnitude' earthquake in Sydney is predicted to cause, just in domestic construction, over $10 bill ....Earthquake protection of masonry buildings using fibre reinforced polymer strengthening. The importance of this research is highlighted, both nationally and internationally, by the work of the insurance industry which reported that the economic risk posed by a moderate earthquake in any of the capital cities in Australia is of the order of billions of dollars (Blong, 1993). For example, a 'design magnitude' earthquake in Sydney is predicted to cause, just in domestic construction, over $10 billion damage and more than 5000 deaths. Most of this damage would be associated with unreinforced masonry construction such as low-rise apartment buildings. The damage bill for the entire built environment (with business interruption costs) could easily be an order of magnitude greater.Read moreRead less
Ductile FRP retrofit of concrete frames subject to static and earthquake loading. Australia needs to spend at least $500 million annually on the repair and upgrading of concrete structures alone just to maintain our existing civil infrastructure. Furthermore, it has been estimated that more than 500 deaths and $10 billion damage will be caused by a moderate earthquake in Sydney or Melbourne. Most of this damage will be due to the collapse of buildings. This research will develop a new form of ....Ductile FRP retrofit of concrete frames subject to static and earthquake loading. Australia needs to spend at least $500 million annually on the repair and upgrading of concrete structures alone just to maintain our existing civil infrastructure. Furthermore, it has been estimated that more than 500 deaths and $10 billion damage will be caused by a moderate earthquake in Sydney or Melbourne. Most of this damage will be due to the collapse of buildings. This research will develop a new form of ductile plating that will reduce the cost of retrofitting concrete bridges and buildings. This project will also help train two PhD students and one Research Associate and further enhance the existing collaboration between Australia and Italy.Read moreRead less