Innovations in stability, reliability and protection of electric power distribution systems to enable increased use of green energy. This project will develop the innovative concepts necessary to increase the number of renewable energy sources in electric power distribution systems. The aim is to enable systems with a distributed mix of conventional rotary generators and renewable converter interfaced generators to operate safely and to required standards of reliability.
Transition to Customer Response Driven Networks. The project seeks to develop an electrical network costing framework that appropriately rewards customers who act to reduce network stress. The solution to the existing explosion in distribution network costs is to develop customer-responsive solutions in demand management and use of storage. The aim of this project is to develop a framework for network costs that is driven by local congestion and which would reward customer-responsive solutions. ....Transition to Customer Response Driven Networks. The project seeks to develop an electrical network costing framework that appropriately rewards customers who act to reduce network stress. The solution to the existing explosion in distribution network costs is to develop customer-responsive solutions in demand management and use of storage. The aim of this project is to develop a framework for network costs that is driven by local congestion and which would reward customer-responsive solutions. The vision is that the aggregator would provide customers with communications/control equipment that would automate the changes in the responsiveness so that customer-generated load shifting would act to limit peaks.Read moreRead less
Degradation conscious grid-scale battery energy management scheme. The project aims to develop an improved battery management system to smooth the intermittent contribution of renewable energy sources to the grid. As the level of penetration of renewable energy sources into electrical grids increases, energy storage will play an increasingly important role in solving some of the technical challenges caused by the intermittent nature of the renewable sources. The existing design methods for gri ....Degradation conscious grid-scale battery energy management scheme. The project aims to develop an improved battery management system to smooth the intermittent contribution of renewable energy sources to the grid. As the level of penetration of renewable energy sources into electrical grids increases, energy storage will play an increasingly important role in solving some of the technical challenges caused by the intermittent nature of the renewable sources. The existing design methods for grid-scale battery management systems do not take into consideration the degradation of the battery banks. Thus, this project aims to fill this gap by developing an electrochemical-based, degradation-conscious, battery management system. The proposed system aims to increase the life span and capacity use of the batteries.Read moreRead less
Micro-electromechanical technology for harnessing terahertz waves. This project proposes novel low-cost miniature devices for spectral, spatial and temporal manipulation of terahertz waves realised using a unified platform based on a single material and fabrication technology sufficiently generic to span the entire very broad terahertz band. It inherently overcomes the most hindering issue of current terahertz instruments relating to the limited span of the spectrum each tool can cover and the h ....Micro-electromechanical technology for harnessing terahertz waves. This project proposes novel low-cost miniature devices for spectral, spatial and temporal manipulation of terahertz waves realised using a unified platform based on a single material and fabrication technology sufficiently generic to span the entire very broad terahertz band. It inherently overcomes the most hindering issue of current terahertz instruments relating to the limited span of the spectrum each tool can cover and the high costs associated with increasing this span; removing the need for making spectral band compromises in the design of future tools. The intended outcome is a platform for terahertz spectroscopic imaging, target recognition, detection of chemical composition of objects, and future high-bandwidth communications.Read moreRead less
New multiplexed optical read-out technologies for micromachined cantilever sensor arrays. Passive sensing of chemical and biological agents is an essential capability in fields as diverse as national security, agriculture, mining and medicine. In many cases, generic sensing (e.g. are there pesticides present) as well as specific sensing (which pesticide) are both important. While sensors based on micro-electromechanical systems (MEMS) have shown extremely high performance at low cost, they have ....New multiplexed optical read-out technologies for micromachined cantilever sensor arrays. Passive sensing of chemical and biological agents is an essential capability in fields as diverse as national security, agriculture, mining and medicine. In many cases, generic sensing (e.g. are there pesticides present) as well as specific sensing (which pesticide) are both important. While sensors based on micro-electromechanical systems (MEMS) have shown extremely high performance at low cost, they have been limited to detection of a specific substance. Success in this project will make low cost generic MEMS-based sensors a reality, allowing, for the first time, wide-spread use of sensitive sensing systems in applications such as farming, container transport security, general medical practice and national security.Read moreRead less
Future Distribution Grids based on Reconfigurable Smart Microgrid Clusters. This aims of the project are to develop innovative paradigm shifting concepts in which power distributions grids will be self sufficient to look after themselves in the absence of power transmission infrastructure. It is expected that in future several renewable energy based distributed generators (DGs) will be dotted in power distribution systems. It is estimated that within another couple of decades sufficient number o ....Future Distribution Grids based on Reconfigurable Smart Microgrid Clusters. This aims of the project are to develop innovative paradigm shifting concepts in which power distributions grids will be self sufficient to look after themselves in the absence of power transmission infrastructure. It is expected that in future several renewable energy based distributed generators (DGs) will be dotted in power distribution systems. It is estimated that within another couple of decades sufficient number of DGs will be placed in networks so much so that they will be able to meet the load demand of domestic and commercial customers. Therefore the focus of this project is to find innovative approaches in which several microgrids, equipped with single-phase and three-phase DGs can work cohesively while supporting each other.Read moreRead less
Biomechanics Meets Robotics: Methods for Accurate and Fast Needle Targeting. This project intends to create a novel integrated framework for biomedical systems that can accurately target a needle. Accurate surgical targeting means less trauma and better patient outcomes. Needles are used in over half of all surgical procedures, but up to 38 per cent of these are affected by targeting errors. Achieving sub-millimetre accuracy is extremely difficult because inserting a needle displaces the tissue ....Biomechanics Meets Robotics: Methods for Accurate and Fast Needle Targeting. This project intends to create a novel integrated framework for biomedical systems that can accurately target a needle. Accurate surgical targeting means less trauma and better patient outcomes. Needles are used in over half of all surgical procedures, but up to 38 per cent of these are affected by targeting errors. Achieving sub-millimetre accuracy is extremely difficult because inserting a needle displaces the tissue and moves the target. How, then, can ultra-fine targeting be achieved? This project plans to integrate non-linear biomechanical models that predict tissue motion with accurate and principled motion control. It seeks to create new methods for surgical robots that will predict target motion and guide a needle to accurately intersect the target.Read moreRead less
Tunable metamaterials for terahertz and infrared applications. This project proposes novel low-cost miniature devices for spectroscopic, spatial, and temporal manipulation of infrared and terahertz waves, which are important for security and short range communication applications. By enabling the modulation of infrared and terahertz signals, the intended outcome is a platform for imaging applications, detection of chemical composition of objects, and future high-bandwidth communications. Using m ....Tunable metamaterials for terahertz and infrared applications. This project proposes novel low-cost miniature devices for spectroscopic, spatial, and temporal manipulation of infrared and terahertz waves, which are important for security and short range communication applications. By enabling the modulation of infrared and terahertz signals, the intended outcome is a platform for imaging applications, detection of chemical composition of objects, and future high-bandwidth communications. Using microfabrication techniques, the project plans to create metamaterials integrated with micro-electro-mechanical systems, which dynamically vary their electromagnetic properties. This technology would enable the creation of new devices that can controllably absorb, reflect or transmit infrared and terahertz signals.Read moreRead less
Silicon-germanium-carbon - a novel opto-mechanic material for optical micro-electromechanical systems. Evolving from past black-and-white images, through present red-green-blue multi-spectral capability, future remote imaging systems promise spectroscopic functionality across much broader wavelength ranges in a low-cost system. However, the high cost of multiple materials and technologies for each specific spectral band limits them to high-cost industry sectors. This project proposes a simple, l ....Silicon-germanium-carbon - a novel opto-mechanic material for optical micro-electromechanical systems. Evolving from past black-and-white images, through present red-green-blue multi-spectral capability, future remote imaging systems promise spectroscopic functionality across much broader wavelength ranges in a low-cost system. However, the high cost of multiple materials and technologies for each specific spectral band limits them to high-cost industry sectors. This project proposes a simple, low-cost, single material technology based on silicon-germanium-carbon thin films for mechanical and optical applications from ultraviolet to long-wave infrared, enabling widespread application of spectroscopic imaging to multiple fields extending from climate change research, through resource exploration, to cancer detection, and aerospace/defense.Read moreRead less
New Silent Anchors for Floating Offshore Wind Turbines in Calcareous Sand . Reliable wind energy sites are in deeper waters and require offshore floating structures to harness the wind energy. Such floating structures require a reliable anchoring system that is secure and environmentally friendly. Calcareous sands, rich in carbonate content, pose unique challenges with their behaviour difficult to predict. In this project, a novel silent anchoring system is investigated that can be installed wit ....New Silent Anchors for Floating Offshore Wind Turbines in Calcareous Sand . Reliable wind energy sites are in deeper waters and require offshore floating structures to harness the wind energy. Such floating structures require a reliable anchoring system that is secure and environmentally friendly. Calcareous sands, rich in carbonate content, pose unique challenges with their behaviour difficult to predict. In this project, a novel silent anchoring system is investigated that can be installed with minimum noise and vibration compared to more traditional counterparts. Through the state of the art development in numerical modelling and centrifuge modelling, this project will advance Australian Science and Practice in designing floating wind turbines in carbonate rich soils offshore and help energy transition.Read moreRead less