The Australian Research Data Commons (ARDC) invites you to participate in a short survey about your
interaction with the ARDC and use of our national research infrastructure and services. The survey will take
approximately 5 minutes and is anonymous. It’s open to anyone who uses our digital research infrastructure
services including Reasearch Link Australia.
We will use the information you provide to improve the national research infrastructure and services we
deliver and to report on user satisfaction to the Australian Government’s National Collaborative Research
Infrastructure Strategy (NCRIS) program.
Please take a few minutes to provide your input. The survey closes COB Friday 29 May 2026.
Complete the 5 min survey now by clicking on the link below.
Tailoring nanocomposites with controllable structural-property relationship. This project aims to process and fabricate graphene-based materials into useful devices. Understanding nanocomposite structure-property relationships are crucial to rapidly develop functional devices. This project will use graphene in the form of nanocomposites and precisely construct them in devices via three-dimensional printing. This will be achieved through the polymer chemistry and interfacial engineering of graphe ....Tailoring nanocomposites with controllable structural-property relationship. This project aims to process and fabricate graphene-based materials into useful devices. Understanding nanocomposite structure-property relationships are crucial to rapidly develop functional devices. This project will use graphene in the form of nanocomposites and precisely construct them in devices via three-dimensional printing. This will be achieved through the polymer chemistry and interfacial engineering of graphene for enhanced dispersibility and self-assembly in the targeted polymer matrix, thus affording maximum synergistic properties. The project expects to develop three-dimensional printing techniques and control and understand the effect of micro-patterning and nano-structuring on printed graphene nanocomposites.Read moreRead less
Scalable and Applicable Nanostructured Adsorbents for Arsenic Removal with High Performance. Arsenic contamination in groundwater and drinking water affects over 100 million people worldwide and causes severe health problems. This project aims to use a recently patented technology to develop a new generation of adsorbents with controlled nanostructure and morphology for arsenic removal. The novel low-cost adsorbents are expected to have superior performance for the treatment of water containing ....Scalable and Applicable Nanostructured Adsorbents for Arsenic Removal with High Performance. Arsenic contamination in groundwater and drinking water affects over 100 million people worldwide and causes severe health problems. This project aims to use a recently patented technology to develop a new generation of adsorbents with controlled nanostructure and morphology for arsenic removal. The novel low-cost adsorbents are expected to have superior performance for the treatment of water containing arsenic at both high and low concentrations. The engineered products will be tested in high-throughput wastewater treatment in pharmaceutical factories and as a household drinking water treatment device. This project aims to bring economic and social benefits to Australian industry and improve the quality of life for people all over the world.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE140101359
Funder
Australian Research Council
Funding Amount
$395,220.00
Summary
Hierarchical 3D metal organic frameworks for the microfabrication of advanced biomedical devices. This project will produce three-dimensional porous structures for use in sensing devices and biomedical implants. Metal-organic frameworks (MOFs) are versatile ultra high surface area materials with controllable pore size, chemical properties and functionalisation. These new materials will be incorporated into portable biosensing devices which are highly sensitive and reliable. The project involves ....Hierarchical 3D metal organic frameworks for the microfabrication of advanced biomedical devices. This project will produce three-dimensional porous structures for use in sensing devices and biomedical implants. Metal-organic frameworks (MOFs) are versatile ultra high surface area materials with controllable pore size, chemical properties and functionalisation. These new materials will be incorporated into portable biosensing devices which are highly sensitive and reliable. The project involves three streams including preparation of the three-dimensional metal scaffolds utilizing state-of-the-art direct manufacturing technologies; integration of MOFs on the three-dimensional metal scaffolds using the metallic structure as the source of the MOF metal ions; and incorporation of bio-active molecules into the three-dimensional hierarchically porous structure for the purpose of bio-device fabrication.Read moreRead less
Enhanced pigment weathering resistance by coating with high dielectric ceramic. The partner company, Tiwest, based in Western Australia, is a major contributor to the economy, and earns more than $A400m annually in exports. It is the only company in the world that mines, separates, refines and manufactures titania products, including pigments, in one region. The current post-titania particle formation wet-coating process, however, presents a major capital and recurrent cost and necessitates a pi ....Enhanced pigment weathering resistance by coating with high dielectric ceramic. The partner company, Tiwest, based in Western Australia, is a major contributor to the economy, and earns more than $A400m annually in exports. It is the only company in the world that mines, separates, refines and manufactures titania products, including pigments, in one region. The current post-titania particle formation wet-coating process, however, presents a major capital and recurrent cost and necessitates a pigment regrind stage. The research will investigate the development of a highly durable dry-coated pigment utilising a novel high dielectric coating. This development has the potential to ensure the partner company's future competitiveness through reduced processing costs and improved product performance.Read moreRead less
Controlling Anisotropic Growth of Metal Oxide Crystals in Aqueous Solution by Selective Adsorption of Small Molecules. The proposed research will enhance our ability to make both light emitting diodes (LEDs) and piezoelectric actuators from ZnO. LEDs are a high efficiency light source that save energy compared to conventional illumination sources and can be fabricated in thin films. The proposal is to also bring the technology for device fabrication to Australia where it can ultimately be used ....Controlling Anisotropic Growth of Metal Oxide Crystals in Aqueous Solution by Selective Adsorption of Small Molecules. The proposed research will enhance our ability to make both light emitting diodes (LEDs) and piezoelectric actuators from ZnO. LEDs are a high efficiency light source that save energy compared to conventional illumination sources and can be fabricated in thin films. The proposal is to also bring the technology for device fabrication to Australia where it can ultimately be used to broaden the economic base of the country. The knowledge of crystal growth rate and crystal morphology control can be applied to improvements in the efficiency of alumina production which is already an important contributor to Australian exports.Read moreRead less
Hydrogen storage materials for energy conversion applications. For a clean environment, the ideal synthetic fuel is hydrogen because it is lightweight, highly abundant and its oxidation product (water) is environmentally benign. However, the effective storage of hydrogen remains a scientific challenge. This project aims to develop innovative materials with high hydrogen storage capacity and long cycle life, including new composite hydrides, catalysed metal hydrides and various nanotubes. The exp ....Hydrogen storage materials for energy conversion applications. For a clean environment, the ideal synthetic fuel is hydrogen because it is lightweight, highly abundant and its oxidation product (water) is environmentally benign. However, the effective storage of hydrogen remains a scientific challenge. This project aims to develop innovative materials with high hydrogen storage capacity and long cycle life, including new composite hydrides, catalysed metal hydrides and various nanotubes. The expected outcome is the achievement of high reversible hydrogen storage capacity to meet all the demands required for energy conversion applications, in particular, for hydrogen storage/fuel-cell vehicular applications.Read moreRead less
Wet Particulate Materials - Flow or Fracture? Most advanced materials are produced from starting materials in the form of fine particles. Powders, especially in ceramic engineering, are first processed wet into near-final shape. Improved understanding of the fracture of particle networks is critical in order to process nano-sized advanced ceramic materials for use in solar energy harvesting and extreme heat engine applications as well as minimising drying cracks in paints and coatings. The resea ....Wet Particulate Materials - Flow or Fracture? Most advanced materials are produced from starting materials in the form of fine particles. Powders, especially in ceramic engineering, are first processed wet into near-final shape. Improved understanding of the fracture of particle networks is critical in order to process nano-sized advanced ceramic materials for use in solar energy harvesting and extreme heat engine applications as well as minimising drying cracks in paints and coatings. The research aims to identify the fundamental link between particle network strength and structure and the fracture of wet powder bodies. The microscopic mechanisms that control the behaviour will be investigated with a particular focus on toughening mechanisms including the influence of plasticity.Read moreRead less
New Nanoscale Up-converting Photoluminescent Materials for Passive Safety Visual Systems. The demand for safety and security products is growing as the importance of providing an environment safer from natural, accidental or man-made threats increases in the community. Life safety applications in buildings and work environments as well as trains and planes for example are dependent upon the ability for non-powered passive systems to give efficient visual guidance in dangerous dark and smoke fill ....New Nanoscale Up-converting Photoluminescent Materials for Passive Safety Visual Systems. The demand for safety and security products is growing as the importance of providing an environment safer from natural, accidental or man-made threats increases in the community. Life safety applications in buildings and work environments as well as trains and planes for example are dependent upon the ability for non-powered passive systems to give efficient visual guidance in dangerous dark and smoke filled environments. This project will provide a practical demonstration of the successful implementation of nanotechnology to smaller Australian companies where it will overcome significant drawbacks in current manufacturing and yield new products which are activated in darkness by infrared radiation.Read moreRead less
A new paradigm in near-net-shape advanced ceramic component processing. The raw materials for high performance ceramics (such as alumina and zirconia) are readily available and produced in Australia. Nearly all of these raw materials are exported. The development of processing to make high value added ceramic components from these raw materials will result in greater profit and more jobs for Australians. The proposed research is to develop a novel innovative process to drive a value adding ce ....A new paradigm in near-net-shape advanced ceramic component processing. The raw materials for high performance ceramics (such as alumina and zirconia) are readily available and produced in Australia. Nearly all of these raw materials are exported. The development of processing to make high value added ceramic components from these raw materials will result in greater profit and more jobs for Australians. The proposed research is to develop a novel innovative process to drive a value adding ceramic processing industry in Australia.Read moreRead less
Deciphering interactions of conducting polymers in agricultural soils. The project aims to improve agricultural efficiency, productivity and yield by advancing the understanding of polymer materials interacting with fertiliser. This project will test the key assumptions behind a new sensor for real-time in-ground monitoring of fertiliser. The expected outcome from this is the rapid synthesis of conducting polymers for stable sensing of fertiliser in a range of soil types and conditions. This sho ....Deciphering interactions of conducting polymers in agricultural soils. The project aims to improve agricultural efficiency, productivity and yield by advancing the understanding of polymer materials interacting with fertiliser. This project will test the key assumptions behind a new sensor for real-time in-ground monitoring of fertiliser. The expected outcome from this is the rapid synthesis of conducting polymers for stable sensing of fertiliser in a range of soil types and conditions. This should provide the pathway to a world first real-time in-ground fertiliser sensor, providing benefit for the sensor manufacturers, farmers, consumers and the environment.Read moreRead less