The Australian Research Data Commons (ARDC) invites you to participate in a short survey about your
interaction with the ARDC and use of our national research infrastructure and services. The survey will take
approximately 5 minutes and is anonymous. It’s open to anyone who uses our digital research infrastructure
services including Reasearch Link Australia.
We will use the information you provide to improve the national research infrastructure and services we
deliver and to report on user satisfaction to the Australian Government’s National Collaborative Research
Infrastructure Strategy (NCRIS) program.
Please take a few minutes to provide your input. The survey closes COB Friday 29 May 2026.
Complete the 5 min survey now by clicking on the link below.
New Paradigm for Materials Technology for AZS Glassmaking Refractories. The project aims to enable the inexpensive manufacture of widely used refractories with reduced energy and materials costs and improved thermal and mechanical properties. The project plans to exploit technology patented by the researchers to fabricate percolated mullite materials from fly ash by sintering, yielding properties equivalent or superior to those of fuse-cast alumina-zirconia-silica refractories (AZS). AZS is expe ....New Paradigm for Materials Technology for AZS Glassmaking Refractories. The project aims to enable the inexpensive manufacture of widely used refractories with reduced energy and materials costs and improved thermal and mechanical properties. The project plans to exploit technology patented by the researchers to fabricate percolated mullite materials from fly ash by sintering, yielding properties equivalent or superior to those of fuse-cast alumina-zirconia-silica refractories (AZS). AZS is expensive since it requires melting by fuse-casting and high-purity raw materials. The project aims to eliminate both requirements by sintering and use of waste fly ash, giving microstructures of dense, direct-bonded, percolated, mullite, single crystals, with residual impurities in the interstices that do not affect creep.Read moreRead less
Low power optical limiting for laser receiver protection. This project will place Australia as one of the leaders in the world in both science and technology of soft glass Photonic Band Gap Fibres, which is an enabling field of research with enormous number applications in Medicine, Defence, communication, etc. The project will develop a critical component (receiver protection) for laser range finders, which are widely being used in defence industries, therefore having national benefit in terms ....Low power optical limiting for laser receiver protection. This project will place Australia as one of the leaders in the world in both science and technology of soft glass Photonic Band Gap Fibres, which is an enabling field of research with enormous number applications in Medicine, Defence, communication, etc. The project will develop a critical component (receiver protection) for laser range finders, which are widely being used in defence industries, therefore having national benefit in terms of safeguarding Australia. The project will also be an excellent vehicle for educating young physicists and engineers in Australia. This is of national importance in itself due to the current shortage of photonics physicists.Read moreRead less
Enhanced sensitivity of electrospray ionization mass spectrometry. Enhanced sensitivity of electrospray ionization mass spectrometry. This project aims to enhance the sensitivity of nano-electrospray ionization mass spectrometry (nanoESI-MS) by an order of magnitude by simultaneously overcoming the two interdependent limitations in ion generation and transmission efficiency. This project will design glass capillaries and tubes with complex structures to enable both multiplexing ion generation fr ....Enhanced sensitivity of electrospray ionization mass spectrometry. Enhanced sensitivity of electrospray ionization mass spectrometry. This project aims to enhance the sensitivity of nano-electrospray ionization mass spectrometry (nanoESI-MS) by an order of magnitude by simultaneously overcoming the two interdependent limitations in ion generation and transmission efficiency. This project will design glass capillaries and tubes with complex structures to enable both multiplexing ion generation from a single capillary and geometrically matching the bore of the tube collecting the emitted ion plume. NanoESI-MS has become an indispensable analytical tool for proteomics and synthetic chemistry. The significant enhancement of nanoESI-MS sensitivity in this project is expected to accelerate progress in disease research, biomarker discovery and drug development.Read moreRead less
Vacuum insulated energy-efficient windows. Vacuum insulated energy-efficient windows. This project aims to develop large vacuum insulated windows with higher insulation performance than triple glazing, the best currently available, by toughening glass to increase its strength, flatness and safety. Higher performance windows reduce energy wastage in the developed world, and vacuum glazing’s thin profile means they can be retrofitted into buildings immediately, without the delay of replacing build ....Vacuum insulated energy-efficient windows. Vacuum insulated energy-efficient windows. This project aims to develop large vacuum insulated windows with higher insulation performance than triple glazing, the best currently available, by toughening glass to increase its strength, flatness and safety. Higher performance windows reduce energy wastage in the developed world, and vacuum glazing’s thin profile means they can be retrofitted into buildings immediately, without the delay of replacing building stock. The anticipated outcome is a major reduction in energy use for climate control in buildings, a large and rapidly growing energy sector that climate change makes unsustainable; and rapid economic, social and environmental benefits through sustainable climate control in cities.Read moreRead less
Ultra-low-loss fluoride glass optical fibres for the future global network. The transmission loss of silica optical fibres limits the capacity of the global internet. Fluoride glass fibres have the potential of reducing the loss by more than 10 times. This project aims to overcome two of the technological challenges of the ultra-low-loss fluoride fibre optics network: (1) commercial-scale manufacturing of improved fibres and (2) signal amplification at 2.3μm. By generating new fundamental knowle ....Ultra-low-loss fluoride glass optical fibres for the future global network. The transmission loss of silica optical fibres limits the capacity of the global internet. Fluoride glass fibres have the potential of reducing the loss by more than 10 times. This project aims to overcome two of the technological challenges of the ultra-low-loss fluoride fibre optics network: (1) commercial-scale manufacturing of improved fibres and (2) signal amplification at 2.3μm. By generating new fundamental knowledge on rare-earth transitions and glass crystal formation, expected outcomes include innovative fibre fabrication methods optimised for space manufacturing. Benefits will include enhanced internet capacity with lower energy requirements, and opportunities for sovereign capability in fluoride fibre fabrication in Australia.Read moreRead less
Development of hierarchical carbon nanotube-glass fibre composites. Development of hierarchical carbon nanotube-glass fibre composites. This project aims to develop a new generation of hierarchical carbon nanotube-glass fibre reinforced composites, using a novel synthesis method that grafts carbon nanotubes (CNTs) onto glass fibre and glass fabric. These hierarchical nano- and micro-fibre composites will have improved in-plane mechanical properties, enhanced fracture toughness and higher electri ....Development of hierarchical carbon nanotube-glass fibre composites. Development of hierarchical carbon nanotube-glass fibre composites. This project aims to develop a new generation of hierarchical carbon nanotube-glass fibre reinforced composites, using a novel synthesis method that grafts carbon nanotubes (CNTs) onto glass fibre and glass fabric. These hierarchical nano- and micro-fibre composites will have improved in-plane mechanical properties, enhanced fracture toughness and higher electric conductivity. This project will use a comprehensive experimental and theoretical study to develop design tools for producing this new generation of composites. The anticipated outcome is lighter and stronger glass fibre composite structures, such as wind turbines in the renewable wind energy industry and boats in the marine industry.Read moreRead less
Fracture-Resistant Highly Insulating Vacuum Glazing. Vacuum glazing can provide thermal and sound insulation for windows that achieve the benefits of double glazing without the increased thickness by incorporating a vacuum space between two sheets of glass. The gap is maintained by pillars under high compressive stress due to atmospheric pressure. In this project, we will study the effect of pillar designs and materials on the U-value and the mechanical performance of these complex structures. D ....Fracture-Resistant Highly Insulating Vacuum Glazing. Vacuum glazing can provide thermal and sound insulation for windows that achieve the benefits of double glazing without the increased thickness by incorporating a vacuum space between two sheets of glass. The gap is maintained by pillars under high compressive stress due to atmospheric pressure. In this project, we will study the effect of pillar designs and materials on the U-value and the mechanical performance of these complex structures. Detailed simulations and measurements of stress distributions in the pillars, edge seals and glass sheets, under static and dynamic loading conditions, will allow us to develop glazing structures with greatly increased mechanical strength.Read moreRead less
Hermetic encapsulated perovskite solar cells for energy harvesting glazings. This project aims is to develop fully hermetic, vacuum encapsulation for perovskite solar cells as energy harvesting glazing systems in buildings with high thermal insulation. This glazing system should simultaneously mitigate heat gain in summer and heat loss in winter, control the entry of light, and generate electric power. This project seeks to develop a new advanced glass encapsulation method with electrical feedth ....Hermetic encapsulated perovskite solar cells for energy harvesting glazings. This project aims is to develop fully hermetic, vacuum encapsulation for perovskite solar cells as energy harvesting glazing systems in buildings with high thermal insulation. This glazing system should simultaneously mitigate heat gain in summer and heat loss in winter, control the entry of light, and generate electric power. This project seeks to develop a new advanced glass encapsulation method with electrical feedthroughs that is fully compatible with perovskite solar cells. It should revolutionise the architectural glazing market with a new generation product with unprecedented electrical power generation capacity and a simultaneous increase in thermal insulation to provide the ultimate energy solution for future cities. An expected outcome from this project is a range of new products to expand the solar market beyond roof-top applications and solar farms.Read moreRead less
Optically-selective window coatings of precious metal nanoparticles. There is great opportunity for Australia to save energy and money through the development of glass which excludes heat. This project builds on UTS research into the use of gold and silver nanoparticles in spectrally-selective coatings for windows. It will develop novel, low-cost in situ deposition processes to lay down ultra-thin coatings of gold nano-rods and other shapes on glass, creating coatings that have a neutral colour ....Optically-selective window coatings of precious metal nanoparticles. There is great opportunity for Australia to save energy and money through the development of glass which excludes heat. This project builds on UTS research into the use of gold and silver nanoparticles in spectrally-selective coatings for windows. It will develop novel, low-cost in situ deposition processes to lay down ultra-thin coatings of gold nano-rods and other shapes on glass, creating coatings that have a neutral colour in the visible wavelengths, but which block infra-red light. Coated glass of this type has major application in the building industry as well as export potential.Read moreRead less
Low cost solution-processable 2D nanomaterials for smart windows. This project aims to develop low cost and scalable synthesis of the active functional nanomaterials in smart windows, their facile application techniques, and their integration into the glass manufacturing process. Smart windows, with thermochromic and electrochromic functionalities, will play important roles towards efficient energy usage and conservation (in terms of air-conditioning and lighting) in most buildings including off ....Low cost solution-processable 2D nanomaterials for smart windows. This project aims to develop low cost and scalable synthesis of the active functional nanomaterials in smart windows, their facile application techniques, and their integration into the glass manufacturing process. Smart windows, with thermochromic and electrochromic functionalities, will play important roles towards efficient energy usage and conservation (in terms of air-conditioning and lighting) in most buildings including offices, schools, and residential homes. . The intended outcome of this project is to facilitate the commercialisation of low-cost, energy-saving smart windows for efficient energy usage and conservation, which is an integral part of a sustainable environment.Read moreRead less