Development of Nanocrystalline Transition Metal Oxide and Polymer-Transition Metal Oxide Composite Materials for Rechargeable Lithium Battery Applications. Recent work by the applicants has shown that nanocrystalline titanates and aluminates hold considerable promise as lithium battery electrodes. Nanocrystalline anatase materials showed considerably greater lithium intercalation ratios compared with their microcrystalline counterparts, and doping with vanadium showed further improvements in ....Development of Nanocrystalline Transition Metal Oxide and Polymer-Transition Metal Oxide Composite Materials for Rechargeable Lithium Battery Applications. Recent work by the applicants has shown that nanocrystalline titanates and aluminates hold considerable promise as lithium battery electrodes. Nanocrystalline anatase materials showed considerably greater lithium intercalation ratios compared with their microcrystalline counterparts, and doping with vanadium showed further improvements in capacity. Sol-gel synthesised V-doped anatase materials produced an initial discharge capacity of 428 Ah/kg compared with only 280 mAh/kg for the undoped anatase electrode in the same Li test cell.In this project different dopants and preparation conditions will be investigated to produce nanocrystalline rutile and aluminate materials as potential candidates for high capacity lithium battery applications.Read moreRead less
Electrocatalytic Generation of Ammonia from Air and Water. The aim is to directly convert nitrogen under mild conditions, using renewable power, to form ammonia for fertilisers and fuels, enabled by new, nanostructured, electrocatalysts based on single-sheet and composite materials. Unlike nitrogen fixation using a three-electrode system, the project will use a novel mixed gas- and liquid-phase electrocatalytic nitrogen reduction two-electrode reactor. Based on fuel cells, it is designed to acce ....Electrocatalytic Generation of Ammonia from Air and Water. The aim is to directly convert nitrogen under mild conditions, using renewable power, to form ammonia for fertilisers and fuels, enabled by new, nanostructured, electrocatalysts based on single-sheet and composite materials. Unlike nitrogen fixation using a three-electrode system, the project will use a novel mixed gas- and liquid-phase electrocatalytic nitrogen reduction two-electrode reactor. Based on fuel cells, it is designed to accelerate the naturally sluggish nitrogen reduction reaction, NRR, significantly improving the reaction rate and selectivity. The project will also gain atomic-level understanding of the mechanism of NRR, based on in-situ spectroscopies used under operando conditions, e.g., Raman or X-ray absorption.Read moreRead less
Advanced Molecular Frameworks for Sodium Battery Electrode Applications. This project aims to develop new molecular materials capable of high capacity sodium-ion insertion. Through an innovative interdisciplinary approach that targets the synthesis and detailed characterisation of an extensive family of materials this project expects to generate major advances in the understanding of how the chemical, physical and structural attributes of the materials relate to their electrical charge/discharge ....Advanced Molecular Frameworks for Sodium Battery Electrode Applications. This project aims to develop new molecular materials capable of high capacity sodium-ion insertion. Through an innovative interdisciplinary approach that targets the synthesis and detailed characterisation of an extensive family of materials this project expects to generate major advances in the understanding of how the chemical, physical and structural attributes of the materials relate to their electrical charge/discharge behaviours. Significant anticipated outcomes and benefits include the development of new material design approaches that optimise battery electrode performance across a diverse parameter space, and the generation of advanced new materials worthy of commercial development in low-cost, large-scale battery applications.Read moreRead less
High Efficiency Electrochemical Cells. This project will study a recently developed, energy efficient ‘capillary-fed’ electrochemical cell architecture in the facilitation of various electro-energy and electro-synthetic transformations. The new cell architecture will be examined as a hydrogen-oxygen fuel cell and as a cell for extracting pure hydrogen from a 5-10% mixture of hydrogen in methane (natural gas), amongst others. The work seeks to improve upon the electrochemical performance of the b ....High Efficiency Electrochemical Cells. This project will study a recently developed, energy efficient ‘capillary-fed’ electrochemical cell architecture in the facilitation of various electro-energy and electro-synthetic transformations. The new cell architecture will be examined as a hydrogen-oxygen fuel cell and as a cell for extracting pure hydrogen from a 5-10% mixture of hydrogen in methane (natural gas), amongst others. The work seeks to improve upon the electrochemical performance of the best commercial and academic cells of such types, if possible. In increasing the efficiency with which renewable electricity can be converted into renewable hydrogen and back, this project will support the national priority of net-zero carbon emissions by 2050.Read moreRead less
Highly-efficient, reversible fuel cell. This project aims to develop a reversible fuel cell - electrolyser capable of storing electricity (in the form of hydrogen gas) with the same overall energy efficiency as the best present storage system, pumped hydro. Whereas pumped hydro requires large infrastructure like dams, the proposed cell will be extremely inexpensive and easily scalable.
Polyaniline Nanofibre Systems. Advanced materials such as the conducting polymer and applications of these materials at the nanoscale and up is clearly a cutting edge area of international interest. Development of readily processable nano systems has been a challenge with a clear scientific and commercial benefit. This proposal will bring linkages to Australia with the world leader in the field, Professor Kaner -UCLA, on the synthesis of polyaniline nanofibres and associated photowelding process ....Polyaniline Nanofibre Systems. Advanced materials such as the conducting polymer and applications of these materials at the nanoscale and up is clearly a cutting edge area of international interest. Development of readily processable nano systems has been a challenge with a clear scientific and commercial benefit. This proposal will bring linkages to Australia with the world leader in the field, Professor Kaner -UCLA, on the synthesis of polyaniline nanofibres and associated photowelding processes. The opportunities to Australia and the USA will be to expand the potential utility of such systems, which without such interactions would permit others to take a stake hold in this emergent and potentially lucrative technology.Read moreRead less
Capacitance Fade Mechanisms in Carbon-Based Supercapacitors. Energy storage is of significant importance to the global community. This project addresses certain performance issues concerning prolonged energy storage in supercapacitors, which are an emerging technology in the electronics industry. CAP-XX is Australia's only manufacturer of supercapacitors, and the improvements to their products that will result from this work, will lead to significant returns to them and the Australian economy.
Preparation of nanostructured surfaces by electrochemical deposition through lyotropic liquid-crystal templates. Hexagonal-phase lyotropic liquid crystals may be used as templates to deposit metals on electrodes. The sizes of the structures made by this method are a few nanometres. We propose to exploit both the aqueous and non-aqueous parts of the liquid crystal to deposit different metals, polymers or metals and polymers. Thin metal wires (nano-wires) sheathed in polymer will be the thinnest i ....Preparation of nanostructured surfaces by electrochemical deposition through lyotropic liquid-crystal templates. Hexagonal-phase lyotropic liquid crystals may be used as templates to deposit metals on electrodes. The sizes of the structures made by this method are a few nanometres. We propose to exploit both the aqueous and non-aqueous parts of the liquid crystal to deposit different metals, polymers or metals and polymers. Thin metal wires (nano-wires) sheathed in polymer will be the thinnest insulated wires ever made. Carbon nanotubes will also be aligned in the hexagonal hole in the template allowing exploitation of these unique species. The structures that will be fabricated will be candidates for catalysts, sensor arrays and electronic devices.Read moreRead less
Ambient Electrochemical C-N Coupling via Co-electrolysis of N2 and CO2. To overcome the hurdles in N2 fixation (massive energy consumption and CO2 emission), investigators creatively hypothesize that the simultaneous electrocatalytic coupling of N2 and CO2 would enable the selective formation of N-products and thus realize their conversion into N--fertilizers and acetamides. Based on the CI's recent discoveries, this project will develop an innovative / sustainable system, which could promote th ....Ambient Electrochemical C-N Coupling via Co-electrolysis of N2 and CO2. To overcome the hurdles in N2 fixation (massive energy consumption and CO2 emission), investigators creatively hypothesize that the simultaneous electrocatalytic coupling of N2 and CO2 would enable the selective formation of N-products and thus realize their conversion into N--fertilizers and acetamides. Based on the CI's recent discoveries, this project will develop an innovative / sustainable system, which could promote the N2 fixation along with CO2 conversion process, a significant alternative approach to simplify the pathways of C-N bond formation. It will thereby contribute to mitigation of greenhouse emissions and create an ecofriendly protocol/technology for distributed production of C-N products under ambient conditions. Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE200100477
Funder
Australian Research Council
Funding Amount
$420,770.00
Summary
Developing sustainable liquid fuels from carbon dioxide conversion. This project aims to develop new electrochemical materials and systems capable of converting carbon dioxide to liquid fuels. It expects to generate new knowledge in the area of advanced materials and systems for sustainable fuel production by interdisciplinary integration of catalyst design, real-time characterisation and system engineering. Expected outcomes include electrochemical carbon dioxide-to-alcohol systems with commerc ....Developing sustainable liquid fuels from carbon dioxide conversion. This project aims to develop new electrochemical materials and systems capable of converting carbon dioxide to liquid fuels. It expects to generate new knowledge in the area of advanced materials and systems for sustainable fuel production by interdisciplinary integration of catalyst design, real-time characterisation and system engineering. Expected outcomes include electrochemical carbon dioxide-to-alcohol systems with commercially relevant performances and in-depth understanding of reaction mechanisms at nano and molecular levels. Significant economic, energy and environmental benefits are expected from the concerted greenhouse gas emissions reduction and the development of sustainable, clean, non-fossil fuels, enabled by this project.Read moreRead less