Linkage Infrastructure, Equipment And Facilities - Grant ID: LE100100121
Funder
Australian Research Council
Funding Amount
$1,000,000.00
Summary
An analytical transmission electron microscope for the investigation of functional materials, earth processes and novel condensed matter. Sustainablity depends on the delivery of clean energy, pristine water and air, and the manufacture of consumer products with small environmental footprints. Modelling long-term impacts requires an understanding of the hydro-geological cycles. The technologies are well known—efficient electronics, fuel cells, lightweight composites, and so on—but delivery is ....An analytical transmission electron microscope for the investigation of functional materials, earth processes and novel condensed matter. Sustainablity depends on the delivery of clean energy, pristine water and air, and the manufacture of consumer products with small environmental footprints. Modelling long-term impacts requires an understanding of the hydro-geological cycles. The technologies are well known—efficient electronics, fuel cells, lightweight composites, and so on—but delivery is not straightforward. It is clear, however, that novel materials manipulated at fine scales will be key. Transmission electron microscopy (TEM) guides the development of sustainable technologies. The new TEM facility at ANU will accelerate current studies, by enhancing the materials research portfolio, and extending national and international collaborations in materials, geological and earth sciences.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE200100033
Funder
Australian Research Council
Funding Amount
$1,200,000.00
Summary
In situ Environmental Electron Microscope Facility. This project aims to establish an In situ Environmental Electron Microscope Facility to characterise real-time and dynamic changes in nanomaterials at the atomic scale. We will combine a cutting-edge 'in situ' gas/heating/electrical bias holder with new camera and analysis technology on a transmission electron microscope. This facility will be a sophisticated suite of equipment that will innovate and transform microscopy in Australia to image s ....In situ Environmental Electron Microscope Facility. This project aims to establish an In situ Environmental Electron Microscope Facility to characterise real-time and dynamic changes in nanomaterials at the atomic scale. We will combine a cutting-edge 'in situ' gas/heating/electrical bias holder with new camera and analysis technology on a transmission electron microscope. This facility will be a sophisticated suite of equipment that will innovate and transform microscopy in Australia to image structural and compositional changes of materials under stimuli at a speed and resolution previously unachievable. This project will drive pioneering research in the fields of Materials Science, Chemistry and Catalysis to solve problems in advanced manufacturing, energy, technology and the environment.Read moreRead less
Diamane: A New Frontier in Materials Science. Single-layer diamond (‘diamane’) is a new frontier of material research although its preparation is still in infancy with many structures predicted possible but have not been made experimentally. Built on a new chemical route for 'graphite to diamane' transformation, this project will address a research gap towards synthesising new diamane(-like) nanostructures and developing an in-depth understanding of the chemically induced phase transformation an ....Diamane: A New Frontier in Materials Science. Single-layer diamond (‘diamane’) is a new frontier of material research although its preparation is still in infancy with many structures predicted possible but have not been made experimentally. Built on a new chemical route for 'graphite to diamane' transformation, this project will address a research gap towards synthesising new diamane(-like) nanostructures and developing an in-depth understanding of the chemically induced phase transformation and structure-property correlations, which will have far-reaching impact on scientific fields beyond carbon research. Preliminary data points to both feasibility and impact for discovering new materials and technologies, which will bring foreseeable scholarly, economic, and social benefits.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE210100042
Funder
Australian Research Council
Funding Amount
$970,000.00
Summary
Cryo-Focused Ion Beam Facility for soft and hard materials. The multipurpose Cryo-Focused Ion beam scanning electron microscope (Cryo-FIB) Facility aims to provide revolutionary insights into beam sensitive materials and biological molecules at high magnification. This instrument will be a unique configuration and the most advanced of its kind in Australia. It will be fitted with a gallium ion source, cryo-stage, cryo-lift out and cryo-transfer suite and capable of imaging and compositional anal ....Cryo-Focused Ion Beam Facility for soft and hard materials. The multipurpose Cryo-Focused Ion beam scanning electron microscope (Cryo-FIB) Facility aims to provide revolutionary insights into beam sensitive materials and biological molecules at high magnification. This instrument will be a unique configuration and the most advanced of its kind in Australia. It will be fitted with a gallium ion source, cryo-stage, cryo-lift out and cryo-transfer suite and capable of imaging and compositional analysis in two- and three-dimensions and preparing samples for atomic-scale analyses with complementary cryo-microscopies. This equipment aims to facilitate innovative research in the fields of energy materials, advanced manufacturing, nanomaterials and in situ cell and structural biology.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE170100140
Funder
Australian Research Council
Funding Amount
$1,050,000.00
Summary
A multiple ion beam facility for microscopy and nanofabrication. This project aims to establish a powerful multiple ion beam system for nanoscience research. The demand for customised therapies, secure communication and efficient energy harvesting prompts the development of nanoscale devices that can interface and interact with the environment: nanotechnology systems with fully functional sensors, detectors, energy and data processing modules. This project would increase the ability to observe a ....A multiple ion beam facility for microscopy and nanofabrication. This project aims to establish a powerful multiple ion beam system for nanoscience research. The demand for customised therapies, secure communication and efficient energy harvesting prompts the development of nanoscale devices that can interface and interact with the environment: nanotechnology systems with fully functional sensors, detectors, energy and data processing modules. This project would increase the ability to observe and manipulate the structure of materials at the nanometre length-scale. This project is expected to boost Australia’s research capacity in nanoscience and develop materials for nanoelectronics, energy and the environment, and structural materials. These outcomes will benefit Australia’s capacity to develop advanced manufacturing industries.Read moreRead less
Tailoring surface properties to maximise boundary slip for microfluidic applications. Overcoming the huge hydrodynamic resistance that slows down liquid flow in confined spaces is a technical and scientific challenge. The project will need to answer the question: what interfacial properties control liquid slip on solid surfaces? Surfaces will be designed to mimic real world examples that present strong drag reduction.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE160100168
Funder
Australian Research Council
Funding Amount
$650,000.00
Summary
Facility for Characterisation of BioNanomaterials. Facility for characterisation of bionanomaterials:
The facility for characterisation of bionanomaterials aims to provide researchers with access to an integrated facility for advanced characterisation of nanomaterials from inception to application in biomedicine. Nanotechnology has contributed to significant advances across a range of disciplines and is increasingly used in biomedical applications. The facility aims to allow detailed examinatio ....Facility for Characterisation of BioNanomaterials. Facility for characterisation of bionanomaterials:
The facility for characterisation of bionanomaterials aims to provide researchers with access to an integrated facility for advanced characterisation of nanomaterials from inception to application in biomedicine. Nanotechnology has contributed to significant advances across a range of disciplines and is increasingly used in biomedical applications. The facility aims to allow detailed examination of how nanomaterials interact in biological systems; from individual nanoparticles to whole animals, and through developing this fundamental understanding provide the means to produce new and highly effective nanomaterials for biomedical applications. The facility plans to support programs using nanomaterials for molecular imaging and intelligent drug delivery, while developing greater understanding of how to create more effective nanobiomaterials.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE210100156
Funder
Australian Research Council
Funding Amount
$289,500.00
Summary
3D Two-Photon Nanoprinter for Advanced Multi-Functional Materials & Devices. The Nanoscribe Photonic Professional GT2 Two-Photon 3D Printer enables tailoring materials’ architecture at nanoscale. This results in unique optical, mechanical, electrical, chemical, biochemical, and acoustic properties enabling a wealth of cutting-edge research activities in variety of fields including mechanical/optical/electrical metamaterials, bioinspired hard/soft materials, biomaterials (e.g., structured cell-ti ....3D Two-Photon Nanoprinter for Advanced Multi-Functional Materials & Devices. The Nanoscribe Photonic Professional GT2 Two-Photon 3D Printer enables tailoring materials’ architecture at nanoscale. This results in unique optical, mechanical, electrical, chemical, biochemical, and acoustic properties enabling a wealth of cutting-edge research activities in variety of fields including mechanical/optical/electrical metamaterials, bioinspired hard/soft materials, biomaterials (e.g., structured cell-tissue interfaces), biomedical devices (implantable devices and drug-delivery systems), nanofluidics, and photonic crystals. In each of these fields, we will use GT2 to print variety of polymers, hydrogels, metals and ceramics, for example by printing polymer-derived nanoceramics that will be simultaneously strong and tough.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE160100888
Funder
Australian Research Council
Funding Amount
$375,000.00
Summary
Illuminating drug activity in the brain with nanocrystalline beacons. The project focuses on developing technologies to understand the activity of drugs and precisely locate their target sites in the brain. Novel nanocrystalline beacons and ultrahigh-sensitivity optical imaging technology developed in the project have the aim to help visualise opioid and other related drug molecules over extended periods, which is impossible with current methods. Quantifying drug target distribution in the brain ....Illuminating drug activity in the brain with nanocrystalline beacons. The project focuses on developing technologies to understand the activity of drugs and precisely locate their target sites in the brain. Novel nanocrystalline beacons and ultrahigh-sensitivity optical imaging technology developed in the project have the aim to help visualise opioid and other related drug molecules over extended periods, which is impossible with current methods. Quantifying drug target distribution in the brain and imaging their dynamics on a single molecule level will shed light on drug-target interactions.Read moreRead less
Protein Structural-Dynamics at Solid Surfaces: Beyond Static Snapshots. The project will use High-Speed Atomic Force Microscopy to directly visualize single proteins in ‘action’ with surfaces, revealing their dynamics at unprecedented combined structural and temporal resolution in liquid. Such characterization moves beyond static ‘snapshots’ of protein structure, toward the dynamic changes in protein conformation that will enable new exploration of key biological processes at liquid-solid interf ....Protein Structural-Dynamics at Solid Surfaces: Beyond Static Snapshots. The project will use High-Speed Atomic Force Microscopy to directly visualize single proteins in ‘action’ with surfaces, revealing their dynamics at unprecedented combined structural and temporal resolution in liquid. Such characterization moves beyond static ‘snapshots’ of protein structure, toward the dynamic changes in protein conformation that will enable new exploration of key biological processes at liquid-solid interfaces. New fundamental discoveries will have an impact on technologies such as medical device coatings, biomaterials, biosensors, microfluidics devices, protein purification and diagnostics assays that are critically dependent on the biological function of adsorbed or immobilized proteins.Read moreRead less