Indoor Photovoltaics Enabled by Wide-Bandgap Perovskite Quantum Dots. This project aims to develop a high-efficiency indoor photovoltaic (PV) technology to provide reliable low-cost power in the multi-billion dollar “Internet of Things” (IoT) market. There are currently no devices that meet the requirements for maximum operating efficiency under indoor illumination. We propose to solve this problem by fabricating PV cells using colloidal perovskite quantum dots that offer class-leading stability ....Indoor Photovoltaics Enabled by Wide-Bandgap Perovskite Quantum Dots. This project aims to develop a high-efficiency indoor photovoltaic (PV) technology to provide reliable low-cost power in the multi-billion dollar “Internet of Things” (IoT) market. There are currently no devices that meet the requirements for maximum operating efficiency under indoor illumination. We propose to solve this problem by fabricating PV cells using colloidal perovskite quantum dots that offer class-leading stability and band gap tunability across the required range, enabled by quantum confinement. The outcome is the development of integrated self-powered IoT devices potentially impacting Advanced Manufacturing growth in Energy, Cyber Security, Food and Agribusiness, as all of these will ultimately rely on networked smart devices.Read moreRead less
Capacity Enhancement, Energy-Loss Reduction and Voltage Control for Remote Three-Phase Distribution Feeders Supplying Electrical Power to Single-Wire Earth-Return Systems. Long distribution feeders supplying electrical energy to Single-Wire Earth-Return (SWER) systems are unique sub-systems of the electric power network in Australia. The SWER systems are inherently unbalanced and use conductors with high resistance values resulting in high energy losses. The capital costs of these systems are hi ....Capacity Enhancement, Energy-Loss Reduction and Voltage Control for Remote Three-Phase Distribution Feeders Supplying Electrical Power to Single-Wire Earth-Return Systems. Long distribution feeders supplying electrical energy to Single-Wire Earth-Return (SWER) systems are unique sub-systems of the electric power network in Australia. The SWER systems are inherently unbalanced and use conductors with high resistance values resulting in high energy losses. The capital costs of these systems are high due to the low area density of loads and the systems are challenged by increasing loads. New methods will be developed for load balancing, controlling losses and improving the power quality. Comparisons will be made between the new technologies and the reconstruction or augmentation of the feeders. It is expected that substantial economic and greenhouse emission benefits will result.Read moreRead less
Bright x-ray beams from laser-driven microplasmas. This project aims to develop a new generation of bright, laser-like x-ray sources for laboratory use. X-ray sources underpin key diagnostic techniques in materials science, advancing applications from structural engineering through to ore processing and energy storage. However, the limited brightness of present-day laboratory x-ray sources restricts the utility and range of these diagnostic techniques. This research intends to use intense lasers ....Bright x-ray beams from laser-driven microplasmas. This project aims to develop a new generation of bright, laser-like x-ray sources for laboratory use. X-ray sources underpin key diagnostic techniques in materials science, advancing applications from structural engineering through to ore processing and energy storage. However, the limited brightness of present-day laboratory x-ray sources restricts the utility and range of these diagnostic techniques. This research intends to use intense lasers to create microscopic plasmas and drive high harmonic generation. The high harmonic generation process is already used to create laser-like ultraviolet light. By optimising the characteristics of the plasma medium, the project aims to extend bright high harmonic generation to the x-ray regime.Read moreRead less
Phase Change Materials for Wind and Solar Energy Storage. This project aims to develop and demonstrate new phase change materials to advance the technology of thermal energy storage. The project will focus on new materials that store thermal energy in the temperature range between 100 - 220°C that is optimal for distributed storage of solar and wind energy. The utility and economics of renewable energy sources are strongly limited by their intermittent nature and inexpensive means of storage are ....Phase Change Materials for Wind and Solar Energy Storage. This project aims to develop and demonstrate new phase change materials to advance the technology of thermal energy storage. The project will focus on new materials that store thermal energy in the temperature range between 100 - 220°C that is optimal for distributed storage of solar and wind energy. The utility and economics of renewable energy sources are strongly limited by their intermittent nature and inexpensive means of storage are urgently required. Expected outcomes of this project include a practical technology, which can be implemented at household and industry level, providing cheap energy from zero-carbon sources. The project aims to provide significant benefits to energy users and support further development of renewables.Read moreRead less
Integrated Cooling Enhancement Technology for Power Electronics. This project aims to develop an unprecedented integrated cooling enhancement technology (IceTech) for silicon carbide on silicon power electronics. IceTech represents a radical departure from current failure-prone packaging solutions. The project aims to elucidate the fundamental interactions between magnetism, heat and mass transfer and apply them to cooling. In partnership with SPTS Technologies, the project then aims to develop ....Integrated Cooling Enhancement Technology for Power Electronics. This project aims to develop an unprecedented integrated cooling enhancement technology (IceTech) for silicon carbide on silicon power electronics. IceTech represents a radical departure from current failure-prone packaging solutions. The project aims to elucidate the fundamental interactions between magnetism, heat and mass transfer and apply them to cooling. In partnership with SPTS Technologies, the project then aims to develop fabrication processes for integrating microchannels and highly sensitive integrated silicon carbide temperature sensors into a chip. This novel fabrication technology allows for the implementation of the revolutionary enhanced cooling concept using two-phase flow with magnetic liquid plugs.Read moreRead less
Transforming Microgrid to Virtual Power Plant –ICT Frameworks,Tools,Control. The project aims to enhance large scale renewable penetrations to national power grid by advancing control, optimization, and ancillary services of Virtual Power Plants (VPPs), considering different disruptive events including recent South Australian blackout. This project expects to create new control, frame communication architecture, develop plug and play type IoT enabled grid interfacing inverter, and optimize resou ....Transforming Microgrid to Virtual Power Plant –ICT Frameworks,Tools,Control. The project aims to enhance large scale renewable penetrations to national power grid by advancing control, optimization, and ancillary services of Virtual Power Plants (VPPs), considering different disruptive events including recent South Australian blackout. This project expects to create new control, frame communication architecture, develop plug and play type IoT enabled grid interfacing inverter, and optimize resource management for distributed VPPs. The anticipated benefits from this institutional level collaborations are that VPPs help in enhancing national power grid operations during normal and disruptive conditions when more renewables are connected and also secure benefits of consumers, prosumers, and grid operators.Read moreRead less
An investigation of the impacts of increased power supply to the national grid by wind generators on the Australian electricity industry. The aim of this project is to discover the most economical and effective way to accommodate large increases in wind power into the national grid and to understand the effects on the national electricity market. This is crucial to ensure stability of electricity supply and affordable prices in the transition towards a low carbon economy.
On-chip spectroscopy and hyperspectral imaging for remote environments. On-chip spectroscopy and hyperspectral imaging for remote environments. This project aims to investigate techniques and materials for building optical spectrometers based on micromachines, usable in portable ground-based and drone-mounted applications in remote environments. Optical spectroscopy is now an accepted technique for materials detection and analysis. The advent of low-cost drone aircraft makes the potential applic ....On-chip spectroscopy and hyperspectral imaging for remote environments. On-chip spectroscopy and hyperspectral imaging for remote environments. This project aims to investigate techniques and materials for building optical spectrometers based on micromachines, usable in portable ground-based and drone-mounted applications in remote environments. Optical spectroscopy is now an accepted technique for materials detection and analysis. The advent of low-cost drone aircraft makes the potential applications of spectroscopy in an imaging form immense. The project expects the resulting low-cost and highly portable technology will transform Australian industry, including securing Australia’s food supply by improving farming practices, aiding mineral exploration, and enhancing capabilities for monitoring Australia’s coastline.Read moreRead less
Characterisation and improvement of radiation beams used for radiotherapy of small lesions. This project aims to characterise the radiation dose from a medical linear accelerator after the beam has been shaped by a mini-multileaf collimator. The characterisation will be achieved through a combination of computer simulations and experimental investigation of the beam using the technique of three-dimensional gel dosimetry. When the dosage characteristics are known, techniques will be developed to ....Characterisation and improvement of radiation beams used for radiotherapy of small lesions. This project aims to characterise the radiation dose from a medical linear accelerator after the beam has been shaped by a mini-multileaf collimator. The characterisation will be achieved through a combination of computer simulations and experimental investigation of the beam using the technique of three-dimensional gel dosimetry. When the dosage characteristics are known, techniques will be developed to improve radiotherapy treatments in patients with small lesions with sizes of up to a few centimetres. This will lead to an improved outcome for some cancer patients.Read moreRead less
Electricity demand side management: models, optimisation and customer engagement. This project will develop methods for management of electricity demand, meeting both customer expectations and electricity network needs. Implementation of these demand-side management methodologies will significantly reduce the need for expenditure on electricity network upgrades and improve the value proposition for distributed renewable energy.