Discovery Early Career Researcher Award - Grant ID: DE160101116
Funder
Australian Research Council
Funding Amount
$300,000.00
Summary
Development of sandwich structures to mitigate blast and impact loading. Innovative sandwich structures with Prismatic Hexagonal-like form and polymeric foam material are proposed in this project and should lead to better designs for structure and personnel protection. Critical civil infrastructure such as government buildings might be subjected to severe blast/impact loads during their lifetime, which may lead to catastrophic consequences. Therefore, protective techniques are desired to increas ....Development of sandwich structures to mitigate blast and impact loading. Innovative sandwich structures with Prismatic Hexagonal-like form and polymeric foam material are proposed in this project and should lead to better designs for structure and personnel protection. Critical civil infrastructure such as government buildings might be subjected to severe blast/impact loads during their lifetime, which may lead to catastrophic consequences. Therefore, protective techniques are desired to increase the resistance capacity of critical structures against blast/impact loads. The expected outcome is to develop an innovative sandwich structure with new structural forms to mitigate blast/impact loads for better structure and personnel protections.Read moreRead less
Study of Blast Resistance Capacity of Basalt Fibre Strengthened Structures. This project plans to investigate the dynamic response of basalt fibre reinforced polymer (BFRP) reinforced structures against blast loading. Critical infrastructures such as embassy buildings, high-rise building, bridges and defence facilities are intensively targeted by increasing terrorist activities or accidental explosions. BFRP is a promising material for such structures because it is cheaper than carbon fibre and ....Study of Blast Resistance Capacity of Basalt Fibre Strengthened Structures. This project plans to investigate the dynamic response of basalt fibre reinforced polymer (BFRP) reinforced structures against blast loading. Critical infrastructures such as embassy buildings, high-rise building, bridges and defence facilities are intensively targeted by increasing terrorist activities or accidental explosions. BFRP is a promising material for such structures because it is cheaper than carbon fibre and has better physico-mechanical properties than glass fibre. However, there has been very limited study of the effectiveness of BFRP strengthening on structure blast-loading resistant capacities. This project aims to perform numerical and experimental studies to support the development of BFRP applications in strengthening structures against blast loads.Read moreRead less
Performance, Evaluation, and Enhancement of Hydrated Cement Treated Crushed Rock Base (HCTCRB) as a Road Base Material for Western Australian Roads. The development of knowledge of HCTCRB, an advanced material in the pavement engineering discipline, will underpin growth in the highway and road construction industry. The key outcomes of this study will enhance and change highway and road organisations, contractors, engineers and others interested in the use and design of pavement materials. This ....Performance, Evaluation, and Enhancement of Hydrated Cement Treated Crushed Rock Base (HCTCRB) as a Road Base Material for Western Australian Roads. The development of knowledge of HCTCRB, an advanced material in the pavement engineering discipline, will underpin growth in the highway and road construction industry. The key outcomes of this study will enhance and change highway and road organisations, contractors, engineers and others interested in the use and design of pavement materials. This is particularly so in light of the recent change to a new era of analytical approaches, rather than the empirical approach of the past. When the outcomes of this project are applied, they will result in an improvement in overall road and highway quality. Read moreRead less
Development of advanced deterioration model for the design of stabilised pavement bases. The Australian road network is a lifeline infrastructure that underpins the nation's living standards and economy. Much of these roads have deteriorated and require rehabilitation to get a new lease of life. This project intends to develop advanced methods to extend the lives of these pavements using in-situ recycling of old pavement materials.
Geopolymer concrete for thin-walled structures in marine environment. This project aims to develop ultra-high performance geopolymer concrete thin-walled structures for the critical infrastructure in the marine environment. It is expected that this project will develop novel design rules for ultra-high performance geopolymer concrete thin-walled structures based on experimental testing, numerical modelling, validation, and simulation. This project is expected to increase the durability of coasta ....Geopolymer concrete for thin-walled structures in marine environment. This project aims to develop ultra-high performance geopolymer concrete thin-walled structures for the critical infrastructure in the marine environment. It is expected that this project will develop novel design rules for ultra-high performance geopolymer concrete thin-walled structures based on experimental testing, numerical modelling, validation, and simulation. This project is expected to increase the durability of coastal infrastructures and significantly reduce the loss of their capacities due to corrosion-induced damage. The development of ultra-high performance geopolymer concrete thin-walled structures is a significant engineering discovery, which is in line with the Australian government 2030 vision for sustainable development.Read moreRead less
A 21st century laboratory testing device for geotechnical engineering. This project aims to use advanced image analysis and cloud computing technologies to replace manual, time-consuming and subjective geotechnical engineering practices with a rapid, automated, and more rational approach. A new geo-materials testing system based on the existing triaxial apparatus will be developed that employs three-dimensional image capture hardware and advanced image analysis techniques. The data measured over ....A 21st century laboratory testing device for geotechnical engineering. This project aims to use advanced image analysis and cloud computing technologies to replace manual, time-consuming and subjective geotechnical engineering practices with a rapid, automated, and more rational approach. A new geo-materials testing system based on the existing triaxial apparatus will be developed that employs three-dimensional image capture hardware and advanced image analysis techniques. The data measured over the entire sample surface will feed into an automated, intelligent parameter selection procedure combining finite element analysis with numerical optimisation techniques. Application of the proposal’s findings will allow more accurate and efficient engineering design of transport and energy infrastructure that supports modern economies.Read moreRead less
Structural assembly for remote housing using fibre reinforced composites. This project aims to address construction challenges in remote housing by off-site manufacturing and on-site assembly using fibre reinforced composites and digital made-to-measure approach. Its goal is to generate interdisciplinary knowledge and practical technologies for reliable, affordable and durable housing in remote harsh environments. Intended results include innovative connections and systems with valuable understa ....Structural assembly for remote housing using fibre reinforced composites. This project aims to address construction challenges in remote housing by off-site manufacturing and on-site assembly using fibre reinforced composites and digital made-to-measure approach. Its goal is to generate interdisciplinary knowledge and practical technologies for reliable, affordable and durable housing in remote harsh environments. Intended results include innovative connections and systems with valuable understanding of their performances under various loading scenarios and accurate digital visualization for remote construction. The outcomes expect to unlock remote development, enhance our competitive strengths for manufacturing and construction industries, and further offer new solutions in post-disaster recovery applications.Read moreRead less
Industrial Transformation Training Centres - Grant ID: IC150100023
Funder
Australian Research Council
Funding Amount
$4,000,000.00
Summary
ARC Training Centre for Advanced Manufacturing of Prefabricated Housing. ARC Training Centre for Advanced Manufacturing of Prefabricated Housing. This training centre aims to unlock the potential for growth of Australia’s prefabricated building industry by creating a sustainable training ecosystem including both industry and universities. It seeks to enable the next generation of engineers and architects to apply advanced manufacturing principles to prefabricated modular buildings. This emerging ....ARC Training Centre for Advanced Manufacturing of Prefabricated Housing. ARC Training Centre for Advanced Manufacturing of Prefabricated Housing. This training centre aims to unlock the potential for growth of Australia’s prefabricated building industry by creating a sustainable training ecosystem including both industry and universities. It seeks to enable the next generation of engineers and architects to apply advanced manufacturing principles to prefabricated modular buildings. This emerging highly trained workforce, driven by the needs of the customer, should identify innovations in the use of advanced materials, designs for manufacturing, and assembly. The centre aims to secure a competitive advantage for Australia in the global value chain leading to local employment growth and increased exports of prefabricated products and services.Read moreRead less
An innovative light weight composite panel system for high speed modular construction. This project aims to develop an innovative composite panel system using aerated geopolymer and a thin high strength steel casing. The new panel system aims to have a number of significant enhancements compared to traditional panels in terms of load resistance, much lower carbon footprint and life-cycle costs. It aims to offer desirable properties, such as being light-weight, easy to construct, economical, recy ....An innovative light weight composite panel system for high speed modular construction. This project aims to develop an innovative composite panel system using aerated geopolymer and a thin high strength steel casing. The new panel system aims to have a number of significant enhancements compared to traditional panels in terms of load resistance, much lower carbon footprint and life-cycle costs. It aims to offer desirable properties, such as being light-weight, easy to construct, economical, recyclable and reusable. A significant gap in knowledge exists in the material and system behaviour of the aerated geopolymer and its fire performance. It is intended that a comprehensive research program will be carried out to address those challenges and to provide design guidelines to rapidly progress these technologies in Australia and overseas.Read moreRead less