Advanced materials for space propulsion: satellites and cubesats. Poorly controlled interactions between plasmas and surfaces often mean loss of process efficiency and surface degradation over time. For Hall thrusters, a type of engine used to move satellites in space, this means increased fuel consumption and shorter useful life. Through modelling and experiment, this project will show how intelligent selection of advanced materials and plasma parameters can minimise surface wear, enable in sit ....Advanced materials for space propulsion: satellites and cubesats. Poorly controlled interactions between plasmas and surfaces often mean loss of process efficiency and surface degradation over time. For Hall thrusters, a type of engine used to move satellites in space, this means increased fuel consumption and shorter useful life. Through modelling and experiment, this project will show how intelligent selection of advanced materials and plasma parameters can minimise surface wear, enable in situ material repair to extend device lifetime, and modulate plasma properties to increase thruster efficiency for a given task. These benefits enable reliable propulsion platforms for massive communication and observation satellite networks and deep space exploration.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE100100195
Funder
Australian Research Council
Funding Amount
$1,000,000.00
Summary
Field-emission gun transmission electron microscope for the research in nanomaterials, metal alloys and biological sciences. The proposed facility is required by a large range of world-leading research programs in light metals, nanomaterials, fibres and biomaterials. These research programs are strongly supported by automobile, textile, mineral and advanced materials industries that have important roles in the current national economy and local communities. The facility will improve significan ....Field-emission gun transmission electron microscope for the research in nanomaterials, metal alloys and biological sciences. The proposed facility is required by a large range of world-leading research programs in light metals, nanomaterials, fibres and biomaterials. These research programs are strongly supported by automobile, textile, mineral and advanced materials industries that have important roles in the current national economy and local communities. The facility will improve significantly our current research ability and help the creation of new research areas in nanotechnology and energy materials beneficial to clean energy, environmental protections and health care. It is also important equipment for new research student training.Read moreRead less
Exploiting shear to form new structures of carbon. This project aims to create new, technologically-interesting, materials by combining shear (sliding forces) with high pressure. The work will use both modelling and experiments to understand the pathways to form new materials such as a different form of diamond that is predicted to be harder than regular diamond. Such a material could be used in coatings for cutting tools or ultra-low-scratch surfaces. Expected outcomes include both an understan ....Exploiting shear to form new structures of carbon. This project aims to create new, technologically-interesting, materials by combining shear (sliding forces) with high pressure. The work will use both modelling and experiments to understand the pathways to form new materials such as a different form of diamond that is predicted to be harder than regular diamond. Such a material could be used in coatings for cutting tools or ultra-low-scratch surfaces. Expected outcomes include both an understanding of the importance of shear in the study of high-pressure science, and as a tool to manufacture new functional materials.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE120100112
Funder
Australian Research Council
Funding Amount
$275,000.00
Summary
A Raman facility for advanced research supporting Australia’s natural gas, oil, coal and minerals industries. This modern Raman Spectroscopy facility will support the science and engineering that underpins the production and processing of Australia’s natural resources. Using high-pressure fibre optics, novel lasers and advanced imaging, the facility will enable the monitoring and improvement of processes and materials under extreme conditions.
Core-scale geodynamic rock-typing of reservoir rock. This project aims to develop a robust classification method for reservoir rock incorporating static, dynamic and mechanical attributes via multiscale digital core analysis using the concept of regional measures. Rock-types are used to populate reservoir models in a sophisticated routine of geological classification, spatial modelling and uncertainty analysis. Introducing high-resolution rock-types incorporating hydraulic properties and compact ....Core-scale geodynamic rock-typing of reservoir rock. This project aims to develop a robust classification method for reservoir rock incorporating static, dynamic and mechanical attributes via multiscale digital core analysis using the concept of regional measures. Rock-types are used to populate reservoir models in a sophisticated routine of geological classification, spatial modelling and uncertainty analysis. Introducing high-resolution rock-types incorporating hydraulic properties and compaction allows the development of a new generation of reservoir simulators. The project aims to derive a consistent high-resolution definition of rock-types incorporating compaction for petrophysical, geological and reservoir engineering purposes. This would greatly enhance our capacity to develop thinly layered reservoirs with direct applications in 4-D seismic reservoir characterisation and the development of unconventional reservoirs.Read moreRead less
Transistor-based sensor technology for fast, reliable and accurate in situ monitoring of recycled wastewater. Water recycling is becoming critical for water supplies worldwide, due to declining natural supplies of fresh water, combined with increasing demand. The greatest community and industry concerns over recycled water are quality assurance and relative cost. Ensuring quality requires monitoring of contaminants, yet no single real-time technology exists to measure the myriad of potential con ....Transistor-based sensor technology for fast, reliable and accurate in situ monitoring of recycled wastewater. Water recycling is becoming critical for water supplies worldwide, due to declining natural supplies of fresh water, combined with increasing demand. The greatest community and industry concerns over recycled water are quality assurance and relative cost. Ensuring quality requires monitoring of contaminants, yet no single real-time technology exists to measure the myriad of potential contaminants. This project will develop technology using AlGaN/GaN-based transistors, sensitised to different contaminants, enabling multi-analyte real-time sensor arrays. In situ monitoring systems based on such arrays will be fast, accurate, reliable, low-cost, and applicable to a broad variety of water recycling projects.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE160100569
Funder
Australian Research Council
Funding Amount
$375,000.00
Summary
Ultra-Porous Devices by Synergistic Aerosol and Atomic Layer Depositions. The project aspires to develop a scalable low-cost approach for the synthesis and integration of ultra-porous films in nanodevices. The project intends to deposit atomic layers onto aerogel-like nanoparticle networks, self-assembled by thermophoresis of flame-made aerosols. This would increase the atomically-deposited layer mass by several hundred-fold per cycle and result in ultra-porous films with electrochemically activ ....Ultra-Porous Devices by Synergistic Aerosol and Atomic Layer Depositions. The project aspires to develop a scalable low-cost approach for the synthesis and integration of ultra-porous films in nanodevices. The project intends to deposit atomic layers onto aerogel-like nanoparticle networks, self-assembled by thermophoresis of flame-made aerosols. This would increase the atomically-deposited layer mass by several hundred-fold per cycle and result in ultra-porous films with electrochemically active surface areas. It is intended that the project will demonstrate the fabrication of solid–gas, solid–liquid and solid–solid nanointerfaces, which will be applicable to key emerging technologies such as wearable medical diagnostics.Read moreRead less
Engineered nanoassmblies for energy conversion. This research will lead to development of clean energy technology that can compete with the traditional energy sources without subsidies, and facilitate long-term solution to the energy crisis and global warming. It will also bring significant benefit to Australian industries and economy and assist achievement of renewable energy target.
Industrial Transformation Research Hubs - Grant ID: IH140100018
Funder
Australian Research Council
Funding Amount
$4,711,583.00
Summary
ARC Research Hub for a World-class Future Fibre Industry. ARC Research Hub for a World-class Future Fibre Industry. This research hub aims to transform the Australian fibre industry into a dynamic sector focused on high-performance and high-value fibres and fibre-based products. Capitalising on the research team's combined strength in fibre science and technology, and working with highly innovative small and medium enterprises and international research leaders, the hub seeks to develop advance ....ARC Research Hub for a World-class Future Fibre Industry. ARC Research Hub for a World-class Future Fibre Industry. This research hub aims to transform the Australian fibre industry into a dynamic sector focused on high-performance and high-value fibres and fibre-based products. Capitalising on the research team's combined strength in fibre science and technology, and working with highly innovative small and medium enterprises and international research leaders, the hub seeks to develop advanced carbon fibres, nanofibres and high-performance novel fibres, as well as value-added applications of fibre materials. These materials are expected to help to reduce energy costs, minimise the environmental footprint of manufacturing processes and improve public health and safety. The hub will also train the next generation of industry-savvy fibre research leaders.Read moreRead less