Modelling twinning transitions in light metals: a new foundation for alloy and process development. Australia's quest to become a world leader in light metals technology is being held back by a lack of quantitative understanding of the metallurgical behaviour of magnesium, which is the lightest engineering metal, and titanium, which is the strongest light metal. In particular, there is poor knowledge of the influence of material parameters on deformation twinning. This knowledge is vital for eff ....Modelling twinning transitions in light metals: a new foundation for alloy and process development. Australia's quest to become a world leader in light metals technology is being held back by a lack of quantitative understanding of the metallurgical behaviour of magnesium, which is the lightest engineering metal, and titanium, which is the strongest light metal. In particular, there is poor knowledge of the influence of material parameters on deformation twinning. This knowledge is vital for efficient production and optimised alloy and part design. This proposal aims to develop a quantitative understanding of transitions in twinning activation for improved performance in fatigue, crash behaviour, structural integrity, forming, forging, extruding, hot rolling and annealing.Read moreRead less
Ultra-lightweight alloys with unique multi-dimensional property profiles. Lightweight alloys with high specific-strength are an essential prerequisite in modern and future technologies. To be useful, they must also possess ductility and inherent corrosion resistance. The latter two properties, however, are inversely correlated with strength. This project proposes to break this paradox - not only in terms of a paradigm change regarding multi-property alloy design - but as applied to the most ligh ....Ultra-lightweight alloys with unique multi-dimensional property profiles. Lightweight alloys with high specific-strength are an essential prerequisite in modern and future technologies. To be useful, they must also possess ductility and inherent corrosion resistance. The latter two properties, however, are inversely correlated with strength. This project proposes to break this paradox - not only in terms of a paradigm change regarding multi-property alloy design - but as applied to the most lightweight engineering alloy system in existence, Magnesium-Lithium (Mg-Li), for which the impact on specific properties is immense. The aim is to develop ultra-lightweight Mg-Li based alloys with formidable property profiles via alloy design and thermomechanical processing. The expected outcome is a new class of structural corrosion resistant metal.Read moreRead less
Crystallography to deform and anneal metals. This project aims to study how the micromechanisms of plastic deformation affect the annealing behaviour of metals. This project will create a computational platform built on a reconstruction algorithm for three-dimensionally reconstructing experimentally-derived orientation data to generate the complete microstructure of crystalline material. It will reconstruct complex deformation and recrystallising structures in metals, through to the boundaries, ....Crystallography to deform and anneal metals. This project aims to study how the micromechanisms of plastic deformation affect the annealing behaviour of metals. This project will create a computational platform built on a reconstruction algorithm for three-dimensionally reconstructing experimentally-derived orientation data to generate the complete microstructure of crystalline material. It will reconstruct complex deformation and recrystallising structures in metals, through to the boundaries, phases and interfaces present in metals and ceramics. The intended outcome is the explanation of unresolved phenomena associated with thermomechanical processing of metals and alloys, useful for materials science, structural geology and condensed matter physics.Read moreRead less
Unlocking the diverse property profile of ultra-lightweight magnesium alloys. This project aims to develop the theory behind why micro alloying contributes to the formation of surface film properties. The exemplar is a prototype Magnesium-Lithium (Mg-Li) base alloy, with high specific-strength and corrosion resistance. This project will lead to the development of a new processable ultra-lightweight, corrosion resistant Mg-Li alloy family that is stronger than the prototype alloy, and with, at le ....Unlocking the diverse property profile of ultra-lightweight magnesium alloys. This project aims to develop the theory behind why micro alloying contributes to the formation of surface film properties. The exemplar is a prototype Magnesium-Lithium (Mg-Li) base alloy, with high specific-strength and corrosion resistance. This project will lead to the development of a new processable ultra-lightweight, corrosion resistant Mg-Li alloy family that is stronger than the prototype alloy, and with, at least, comparable ductility and corrosion resistance. Not only will the outcomes of the work be a fundamental advance to the fields of metallurgy and corrosion science, they will lead to the identification of an optimised compositional window for creating our second generation Mg-Li alloy family capable of being manufactured into ultra-lightweight, corrosion resistant metal products.Read moreRead less
Light steel roof and wall systems under combined wind and bushfire actions. The project aims to investigate the complex behaviour of light cold-formed-steel roof and wall systems involving localized failures under the combined action of wind and bushfire using wind suction tests at elevated temperatures combined with advanced numerical modelling. It will generate new knowledge of the behaviour and strength of cold-formed-steel roof and wall systems under bushfire conditions. Expected outcomes in ....Light steel roof and wall systems under combined wind and bushfire actions. The project aims to investigate the complex behaviour of light cold-formed-steel roof and wall systems involving localized failures under the combined action of wind and bushfire using wind suction tests at elevated temperatures combined with advanced numerical modelling. It will generate new knowledge of the behaviour and strength of cold-formed-steel roof and wall systems under bushfire conditions. Expected outcomes include new design models for wind, bushfire and cold-formed-steel Standards. This will significantly improve the bushfire safety of buildings, since non-combustible steel roof and wall systems are used as building envelopes in bushfire prone areas, but are not designed to withstand recently discovered bushfire-enhanced winds.Read moreRead less
A Microstructure Based Approach to Steel Design for Improved Crash Performance. There is a continual need for the automotive industry to develop vehicles with increased fuel efficiency and safety. This research will establish how different types of new advanced steels can contribute to improved crash worthiness, while also helping to increase fuel efficiency through lighter weight. This will lead to the development of new steels that offer even better crash performance while also providing more ....A Microstructure Based Approach to Steel Design for Improved Crash Performance. There is a continual need for the automotive industry to develop vehicles with increased fuel efficiency and safety. This research will establish how different types of new advanced steels can contribute to improved crash worthiness, while also helping to increase fuel efficiency through lighter weight. This will lead to the development of new steels that offer even better crash performance while also providing more realistic computer models for car designers.Read moreRead less
Texture enhancement by inoculation in strip-cast metallic sheet. A recent discovery by the applicants has shown the possibility of producing, by inoculation during a direct casting route, stainless steel strip that exhibits a remarkably strong crystallographic alignment of grains perpendicular to the sheet surface. The production of this so-called <001>//ND fibre texture in thin strip by direct casting represents a vastly simplified route for the possible production of iron-base strip suitable f ....Texture enhancement by inoculation in strip-cast metallic sheet. A recent discovery by the applicants has shown the possibility of producing, by inoculation during a direct casting route, stainless steel strip that exhibits a remarkably strong crystallographic alignment of grains perpendicular to the sheet surface. The production of this so-called <001>//ND fibre texture in thin strip by direct casting represents a vastly simplified route for the possible production of iron-base strip suitable for some magnetic applications. The principle aims of the project are to elucidate the mechanisms of formation of this highly textured steel sheet and to explore the feasibility of reproducing the texture in other metallic systems.Read moreRead less
An Integrated Thermal and Structural Investigation for the Development of Innovative Lightweight Cold-formed Steel Wall and Floor Systems under Fire Conditions. This research will benefit the Australian building industry by providing a set of design rules that will not only enhance the fire safety standards but also the structural robustness of steel construction, thereby resulting in a reduction in loss of lives and property due to natural or man-made disasters. This will give Australian manufa ....An Integrated Thermal and Structural Investigation for the Development of Innovative Lightweight Cold-formed Steel Wall and Floor Systems under Fire Conditions. This research will benefit the Australian building industry by providing a set of design rules that will not only enhance the fire safety standards but also the structural robustness of steel construction, thereby resulting in a reduction in loss of lives and property due to natural or man-made disasters. This will give Australian manufacturers a leading edge both nationally and internationally in developing innovative prefabricated fire resistant LSF wall and floor systems using high strength steels. Australians have an opportunity to become world leaders in fire research and LSF construction. It will provide valuable research training to young Australians and will contribute to the protection of Australia's critical infrastructure.Read moreRead less
INVESTIGATION OF THE EFFECT OF ALLOYING ELEMENTS ON SHEAR BAND FORMATION DURING THE WARM ROLLING OF LOW CARBON AND INTERSTITIAL FREE STEELS. This proposal involves the application of three dimensional atom probe field ion microscopy and advanced transmission electron microscopy techniques to study the phenomena of precipitation and solute atoms' interactions with dislocations in warm rolled low carbon steels and interstitial free steels. It is intended to examine the effect of alloying addition ....INVESTIGATION OF THE EFFECT OF ALLOYING ELEMENTS ON SHEAR BAND FORMATION DURING THE WARM ROLLING OF LOW CARBON AND INTERSTITIAL FREE STEELS. This proposal involves the application of three dimensional atom probe field ion microscopy and advanced transmission electron microscopy techniques to study the phenomena of precipitation and solute atoms' interactions with dislocations in warm rolled low carbon steels and interstitial free steels. It is intended to examine the effect of alloying additions on in-grain shear bands formation, texture formation and formability of warm rolled and annealed low carbon steels. Ultimately, the project is concerned with developing of fundamental understanging of solute interactions which provide an improved basis for design of these economically significant steels.Read moreRead less
Enhancing the fire and energy ratings of cold-formed steel wall systems. This project intends to develop novel cold-formed light-gauge steel frame (LSF) wall systems with superior fire resistance and energy ratings for use in buildings. LSF systems are increasingly used in homes and offices. The project plans to investigate fundamental thermal, structural and energy performances of LSF walls and their components using experimental and numerical studies. It plans to develop enhanced plasterboards ....Enhancing the fire and energy ratings of cold-formed steel wall systems. This project intends to develop novel cold-formed light-gauge steel frame (LSF) wall systems with superior fire resistance and energy ratings for use in buildings. LSF systems are increasingly used in homes and offices. The project plans to investigate fundamental thermal, structural and energy performances of LSF walls and their components using experimental and numerical studies. It plans to develop enhanced plasterboards, insulations and innovative composite panels using suitable nanomaterials, chemical additives, fillers and phase-change materials and use these with innovative wall configurations to significantly improve the fire and energy performance of LSF walls. The new wall systems may increase occupant comfort and safety, reduce business losses in fires, and lead to low-energy buildings.Read moreRead less