A new management tool for effective wastewater source control. The use of recycled wastewater can dramatically increase the water supply capacity. However, the potential health risk from possible containments in recycled wastewater must be mitigated. This project aims to develop an effective wastewater source management tool for safeguarding the recycled water production and usage.
Advanced Stability Sensor for Anaerobic Digestion Processes. Australia is firmly committed to energy reduction and production, where possible, renewable energy production. Anaerobic digestion is the only in-use wastewater treatment option that not only can have net zero energy consumption, but that actually produces energy. This energy is from renewable carbon sources is therefore a zero contributor to greenhouse gases. Australia has some of the strongest environmental limit laws in the world. ....Advanced Stability Sensor for Anaerobic Digestion Processes. Australia is firmly committed to energy reduction and production, where possible, renewable energy production. Anaerobic digestion is the only in-use wastewater treatment option that not only can have net zero energy consumption, but that actually produces energy. This energy is from renewable carbon sources is therefore a zero contributor to greenhouse gases. Australia has some of the strongest environmental limit laws in the world. While this is reasonable - given our sensitive environment -assisting industry in meeting those limits in a cost effective manner is a priority. Given sufficient process stability and transparency, anaerobic digestion is a low capital and operating cost option. Read moreRead less
The Study of Pretreatment Options for Composite Fouling of Reverse Osmosis Membranes Used in Water Treatment and Production. It is recognised worldwide that fouling is a major impediment in operation of Reverse Osmosis units used for production, purification and treatment of water. This project is aimed at studying pre-treatment options for composite fouling which is the main type of fouling present in RO units by using both model feed systems and actual field water. The project outcomes are to ....The Study of Pretreatment Options for Composite Fouling of Reverse Osmosis Membranes Used in Water Treatment and Production. It is recognised worldwide that fouling is a major impediment in operation of Reverse Osmosis units used for production, purification and treatment of water. This project is aimed at studying pre-treatment options for composite fouling which is the main type of fouling present in RO units by using both model feed systems and actual field water. The project outcomes are to understand and develop pre-treatment strategies and to use those to develop a hybrid pre-treatment technology. This project will significantly impact water production in general and its outcomes will have far-reaching implications in treatment of water both within Australia and globally.Read moreRead less
The Boron Rejection by RO Membranes in presence of Calcium Carbonate and Magnesium Hydroxide. Water scarcity in various parts of the world demands the use of available saline waters for production of potable water. Reverse Osmosis membranes have been used as a means of achieving this objective. Fouling is a major impediment in operation of reverse osmosis units. The project aims to study boron removal by RO under high pH which increases the boron rejection but at the same time exacerbates compos ....The Boron Rejection by RO Membranes in presence of Calcium Carbonate and Magnesium Hydroxide. Water scarcity in various parts of the world demands the use of available saline waters for production of potable water. Reverse Osmosis membranes have been used as a means of achieving this objective. Fouling is a major impediment in operation of reverse osmosis units. The project aims to study boron removal by RO under high pH which increases the boron rejection but at the same time exacerbates composite fouling by calcium carbonate and magnesium hydroxide. Optimum pH for boron rejection will be determined and propensity of calcium carbonate and magnesium hydroxide at that pH range will be evaluated.Read moreRead less
Engineering improved technology for nanoparticle-based adjuvant manufacture. Over the next decade nanotechnology will redefine vaccines for animal and human health. Nanoparticle adjuvants will boost engineered vaccines that use minimal antigens such as recombinant proteins and synthetic peptides. This project aims to develop a platform technology for making and controlling the properties of inulin nanoparticles by optimising the engineering and manufacturing aspects of inulin nanoparticles to fu ....Engineering improved technology for nanoparticle-based adjuvant manufacture. Over the next decade nanotechnology will redefine vaccines for animal and human health. Nanoparticle adjuvants will boost engineered vaccines that use minimal antigens such as recombinant proteins and synthetic peptides. This project aims to develop a platform technology for making and controlling the properties of inulin nanoparticles by optimising the engineering and manufacturing aspects of inulin nanoparticles to fundamentally understand the relationship between physical-chemical properties and efficacy. Completion of this project aims to produce potent nanoparticle-based adjuvants underpinned by novel manufacturing technology, to ultimately facilitate the development of more effective and protective vaccines for animals and humans.Read moreRead less
Zeolitic Nanoflake-Polymer Composite Membranes for Low Energy Desalination. The desalination of seawater is becoming an important source of drinking water for Australia. The current desalination process using polymer membranes is energy-intensive. The proposed project will contribute to the development of low energy desalination technology by advancing membrane design and fabrication techniques. The use of zeolitic nanoflake-polymer composite membranes developed in this project is expected to su ....Zeolitic Nanoflake-Polymer Composite Membranes for Low Energy Desalination. The desalination of seawater is becoming an important source of drinking water for Australia. The current desalination process using polymer membranes is energy-intensive. The proposed project will contribute to the development of low energy desalination technology by advancing membrane design and fabrication techniques. The use of zeolitic nanoflake-polymer composite membranes developed in this project is expected to substantially reduce energy consumption in the desalination process. This research will produce important economic and environmental benefits by developing a green technology for fresh water production and water treatment for power generation, irrigation and other industrial uses.Read moreRead less
Use of Gas Expanded Liquids to Facilitate Process Intensification. The aim of this research is the utilisation of gas expanded liquids (GXLs) in technology platforms based on the principles of process intensification (PI). In order to facilitate the attainment of project objectives a comprehensive investigation of the fundamental properties of GXLs, and their interactions is proposed. A significant component of the programme is expected to be to use the knowledge obtained to facilitate the devel ....Use of Gas Expanded Liquids to Facilitate Process Intensification. The aim of this research is the utilisation of gas expanded liquids (GXLs) in technology platforms based on the principles of process intensification (PI). In order to facilitate the attainment of project objectives a comprehensive investigation of the fundamental properties of GXLs, and their interactions is proposed. A significant component of the programme is expected to be to use the knowledge obtained to facilitate the development of scale-up protocol for PI based methodologies, with particular emphasis on the production of biomaterials. GXLs technology is frontier technology with regard to the biomaterials sector.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE190100082
Funder
Australian Research Council
Funding Amount
$408,000.00
Summary
Nanostructures derived from metal-organic frameworks for sodium-ion batteries. This project aims to overcome poor reaction kinetics and the lack of effective anode materials owing to the large size of sodium-ions in high performance sodium-ion batteries. The project will explore a series of functional nanomaterials with unique nanostructures and complex compositions, enabled by metal-organic framework assisted synthetic methods. High performance sodium ion batteries are demonstrating great poten ....Nanostructures derived from metal-organic frameworks for sodium-ion batteries. This project aims to overcome poor reaction kinetics and the lack of effective anode materials owing to the large size of sodium-ions in high performance sodium-ion batteries. The project will explore a series of functional nanomaterials with unique nanostructures and complex compositions, enabled by metal-organic framework assisted synthetic methods. High performance sodium ion batteries are demonstrating great potential to meet the future demand for large-scale and low-cost stationary energy storage. However, their practical implementation is still hindered by their poor reaction kinetics and the lack of effective anode materials owing to the large size of sodium-ions. The project outcomes will promote the commercialisation of sodium ion batteries and power Australia’s sustainable economy in the long run.Read moreRead less
Engineering floating liquid marbles for three-dimensional cell cultures. This project aims to understand the physics of three-dimensional cell cultures in a liquid marble floating on a liquid free surface. New methodology developed can produce these cell cultures without using matrices or scaffolds and with run-times well beyond existing technologies. This methodology closely mimics a normal in-vivo environment and produces spheroids needed in cell transplantation therapies. This project will re ....Engineering floating liquid marbles for three-dimensional cell cultures. This project aims to understand the physics of three-dimensional cell cultures in a liquid marble floating on a liquid free surface. New methodology developed can produce these cell cultures without using matrices or scaffolds and with run-times well beyond existing technologies. This methodology closely mimics a normal in-vivo environment and produces spheroids needed in cell transplantation therapies. This project will resolve uncertainties in the underlying phenomena. The expected outcome should support future high quality cell cultures suitable for transplantation therapies.Read moreRead less
Bubble Dynamics in Fine Droplets: Behaviour and Control. The principal vision in this project is to gain a deeper understanding of the formation, growth and collapse of bubbles within micron-size droplets and, in doing so, provide the technical underpinning necessary to advance the development of a range of emerging technologies in the light alloys manufacturing, atomisation, non-invasive medical therapy, drug delivery, and nucleation / solidification in thermal energy storage systems. Expected ....Bubble Dynamics in Fine Droplets: Behaviour and Control. The principal vision in this project is to gain a deeper understanding of the formation, growth and collapse of bubbles within micron-size droplets and, in doing so, provide the technical underpinning necessary to advance the development of a range of emerging technologies in the light alloys manufacturing, atomisation, non-invasive medical therapy, drug delivery, and nucleation / solidification in thermal energy storage systems. Expected outcomes include new experimental evidence and validated mathematical models for the analysis of bubbles encapsulated by fine droplets. The outcomes should significantly enhance Australia’s research and innovation capacity in the field of confined space bubble dynamics and related industrial applications. Read moreRead less