Development of novel cathodes for next generation solid oxide fuel cells. This project will provide novel cathodes to reduce the operating temperature of the Solid Oxide Fuel Cell (SOFC) as low as 500 degrees celsius. The technology may lead to widespread utilization of SOFCs, thus providing great assistance to Australia's industries in term of reducing carbon dioxide emission and easing pressure from carbon tax.
Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful ....Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful until carbon dioxide poisoning can be prevented. This project expects to make these LT-SOFC cathode materials commercially viable, solving a problem for the widespread use of low temperature solid oxide fuel cells.Read moreRead less
High Performance Anode for Direct Ammonia Solid Oxide Fuel Cells. Solid oxygen fuel cells are a clean energy generation device with very high energy efficiency and if with hydrogen as fuel, the emission is zero. However, the utilisation of hydrogen is limited by on-board storage. Ammonia is a promising hydrogen carrier and can be directly fed to solid oxide fuel cells without fuel storage problem, and the products are just hydrogen and nitrogen. For direct ammonia solid oxide fuel cells, the key ....High Performance Anode for Direct Ammonia Solid Oxide Fuel Cells. Solid oxygen fuel cells are a clean energy generation device with very high energy efficiency and if with hydrogen as fuel, the emission is zero. However, the utilisation of hydrogen is limited by on-board storage. Ammonia is a promising hydrogen carrier and can be directly fed to solid oxide fuel cells without fuel storage problem, and the products are just hydrogen and nitrogen. For direct ammonia solid oxide fuel cells, the key challenge is the anode. This project aims to develop a high performance anode for direct ammonia solid oxide fuel cells with both high activity and high stability at low temperature (below 600 degree C), thus addressing a key issue to make the direct ammonia solid oxide fuel cells commercially viable.Read moreRead less
Composites for thermal expansion matched oxygen electrodes. This project aims to develop high performance composite oxygen electrodes by using both negative thermal expansion materials and electrolyte materials to tailor the thermal expansion and activities of the perovskite-based electrodes for use in reduced temperature solid oxide cells. Such composite electrodes will show highly matched thermal expansion with electrolyte without sacrificing high activity at reduced temperatures. This project ....Composites for thermal expansion matched oxygen electrodes. This project aims to develop high performance composite oxygen electrodes by using both negative thermal expansion materials and electrolyte materials to tailor the thermal expansion and activities of the perovskite-based electrodes for use in reduced temperature solid oxide cells. Such composite electrodes will show highly matched thermal expansion with electrolyte without sacrificing high activity at reduced temperatures. This project seeks to address an important practical issue in the operation of solid oxide power cells - thermal expansion compatibility, which causes poor efficiency outside a narrow temperature band.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE120100026
Funder
Australian Research Council
Funding Amount
$480,000.00
Summary
A surface characterisation facility. This surface characterisation facility will provide scientists with an understanding of material's surfaces and interfaces. This will lead to a range of new technologies and innovative solutions required to address the many resource and environmental challenges facing our planet now and in the future.
Oxide-based high temperature proton exchange membrane fuel cells. Proton exchange membrane fuel cells (PEMFCs) are one of the most efficient energy conversion technologies for producing electricity from fuels such as hydrogen and methanol. Current PEMFCs use precious metal catalysts, and the performance of liquid methanol fuel is disappointingly low due to the inability of polymer or hybrid membranes to operate at temperatures above 160-180 degrees centigrade. This work aims to develop an all ox ....Oxide-based high temperature proton exchange membrane fuel cells. Proton exchange membrane fuel cells (PEMFCs) are one of the most efficient energy conversion technologies for producing electricity from fuels such as hydrogen and methanol. Current PEMFCs use precious metal catalysts, and the performance of liquid methanol fuel is disappointingly low due to the inability of polymer or hybrid membranes to operate at temperatures above 160-180 degrees centigrade. This work aims to develop an all oxide-based PEMFC technology using a recently developed sintered and heteropolyacid functionalised mesoporous silica membrane. The utilisation of all-oxide-PEMFCs using non-precious metal catalysts is expected to significantly enhance the power density, reduce costs, and enhance the commercial viability of PEMFC technologies.Read moreRead less
Development of High Performance Nanostructured (Bi, Sb)2Te3 Nanomaterials. The direct energy conversion between heat and electricity, based on thermoelectric effects without moving parts, has been considered as a green and sustainable solution to the global energy dilemma. This project aims to develop novel band-engineered (Bi, Sb)2Te3 nanomaterials for high-efficiency energy conversion using novel microwave assisted wet chemistry approach, coupled with nanostructure and band engineering strateg ....Development of High Performance Nanostructured (Bi, Sb)2Te3 Nanomaterials. The direct energy conversion between heat and electricity, based on thermoelectric effects without moving parts, has been considered as a green and sustainable solution to the global energy dilemma. This project aims to develop novel band-engineered (Bi, Sb)2Te3 nanomaterials for high-efficiency energy conversion using novel microwave assisted wet chemistry approach, coupled with nanostructure and band engineering strategies. The key breakthrough is to design high performance (Bi, Sb)2Te3 thermoelectrics for satisfying the high efficiency solid-state devices. The expected outcomes will lead to an innovative technology that waste heat recovery and refrigeration, which will place Australia at the forefront of practical energy technologies.Read moreRead less
New mesoporous materials for use in high temperature proton exchange fuel cell membranes. A novel high temperature proton exchange membrane based on heteropolyacid (HPA) functionalised mesoporous silica will be developed. This research into the fundamental materials science of novel proton exchange membranes is expected to impact significantly on the advancement and commercialisation of portable fuel cell devices.
Australian Laureate Fellowships - Grant ID: FL230100095
Funder
Australian Research Council
Funding Amount
$3,095,070.00
Summary
Materials Nanotectonics: Designing Conductive Inorganic Porous Materials. This project aims to develop the next generation of conductive porous materials through an integrated approach which combines inorganic synthesis with informatics. Using this approach, transition metals can be combined with nonmetals creating mesoporous materials with precise control of their internal space allowing the correlations between structure, composition, properties, and performance to be revealed. This project is ....Materials Nanotectonics: Designing Conductive Inorganic Porous Materials. This project aims to develop the next generation of conductive porous materials through an integrated approach which combines inorganic synthesis with informatics. Using this approach, transition metals can be combined with nonmetals creating mesoporous materials with precise control of their internal space allowing the correlations between structure, composition, properties, and performance to be revealed. This project is expected to generate new highly efficient electrocatalysts and energy conversion devices based on low-cost and earth-abundant transition metals. The project outcomes will position Australia at the forefront of research and development in advanced materials, smart catalysts, and renewable energy technologies.Read moreRead less
Australian Laureate Fellowships - Grant ID: FL160100089
Funder
Australian Research Council
Funding Amount
$2,600,796.00
Summary
In situ electron microscopy toward new materials and applications. In situ electron microscopy toward new materials and applications. This project aims to develop materials for structural and green energy applications, using spatially-resolved, dynamic in situ transmission electron microscopy to research fundamental mechanical, electrical, thermal, optical, optoelectronic and photovoltaic properties of diverse nanostructures. These techniques measure nanomaterial (one-dimensional nanotubes and n ....In situ electron microscopy toward new materials and applications. In situ electron microscopy toward new materials and applications. This project aims to develop materials for structural and green energy applications, using spatially-resolved, dynamic in situ transmission electron microscopy to research fundamental mechanical, electrical, thermal, optical, optoelectronic and photovoltaic properties of diverse nanostructures. These techniques measure nanomaterial (one-dimensional nanotubes and nanowires and two-dimensional graphene-like nanosheets) response to external stimuli, including mechanical, electrical, optical and thermal stimuli. Anticipated outcomes are new ultralight and superstrong structural composites and ‘green-energy’ nanomaterials, such as solar cells, touch panels, batteries, supercapacitors, field-effect transistors, light sensors and displays.Read moreRead less