Preventing biological growth – a new generation anti-biofouling coatings. The project aims to improve anti-biofouling technology by developing a ‘smart and green’ coating that requires no toxic biocides and makes use of copper already present in the water. Biofouling is the unwanted attachment and growth on surfaces in water; it causes significant problems on ships and in drinking water systems, and damages infrastructure and capital investment. Biofouling also carries a significant risk of spre ....Preventing biological growth – a new generation anti-biofouling coatings. The project aims to improve anti-biofouling technology by developing a ‘smart and green’ coating that requires no toxic biocides and makes use of copper already present in the water. Biofouling is the unwanted attachment and growth on surfaces in water; it causes significant problems on ships and in drinking water systems, and damages infrastructure and capital investment. Biofouling also carries a significant risk of spreading diseases and environmental damage through the introduction of invasive marine species. Existing coatings release highly toxic substances into the water, causing untold environmental damage. This project offers a single, comprehensive solution for all of the above problems.Read moreRead less
Special Research Initiatives - Grant ID: SR180200051
Funder
Australian Research Council
Funding Amount
$497,638.00
Summary
Integrated platform technologies for remediation of PFAS contaminated water. This project aims to develop low cost platform technologies using our patented high capacity adsorbent material for the removal of perfluoralkyl substances (PFAS) from contaminated water sources in Australia. Our advanced adsorbent material is made from a novel sulfur co-polymer and activated carbon, both of which have high affinity for PFAS, but when combined as a composite provide significant advantages for PFAS remed ....Integrated platform technologies for remediation of PFAS contaminated water. This project aims to develop low cost platform technologies using our patented high capacity adsorbent material for the removal of perfluoralkyl substances (PFAS) from contaminated water sources in Australia. Our advanced adsorbent material is made from a novel sulfur co-polymer and activated carbon, both of which have high affinity for PFAS, but when combined as a composite provide significant advantages for PFAS remediation. This adsorbent will be applied in mobile water treatment plants for remediation of PFAS contaminated aquifers. We will also develop point-of-use water filters for individual, domestic use from the adsorbent, thus empowering individuals and local communities by delivering tangible solutions to Australia’s PFAS crisis.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE100100030
Funder
Australian Research Council
Funding Amount
$1,200,000.00
Summary
Advanced focused ion beam (FIB) / scanning electron microscopes (SEM) for nanometre scale characterisation and fabrication. These instruments are designed to provide fundamental insights into physical and biological systems though characterisation and fabrication of structures at nanometre length scales. These versatile platforms will support a wide range of projects covering three national research priority areas. These range from the characterisation of light alloys for improving and building ....Advanced focused ion beam (FIB) / scanning electron microscopes (SEM) for nanometre scale characterisation and fabrication. These instruments are designed to provide fundamental insights into physical and biological systems though characterisation and fabrication of structures at nanometre length scales. These versatile platforms will support a wide range of projects covering three national research priority areas. These range from the characterisation of light alloys for improving and building Australia's Aluminium, Magnesium and Titanium alloy industries, to the study of aerosol particles for improved pulmonary drug delivery for asthma patients, the development of advanced solar cells and the study of the integrated behaviour of the soil-microbe system for sustainable agriculture.Read moreRead less
Reducing gas and ash corrosion in advanced power generation. Advanced power generation using new coal combustion technologies increases energy efficiency and makes carbon dioxide capture possible, but increases the corrosion problems. This project aims to determine the corrosion behaviour of chromia-scale forming iron- and nickel-base alloys in the presence of deposits (coal ashes and salts) under carbon dioxide rich gas atmospheres. The increased understanding of alloy behaviour in hot corrosiv ....Reducing gas and ash corrosion in advanced power generation. Advanced power generation using new coal combustion technologies increases energy efficiency and makes carbon dioxide capture possible, but increases the corrosion problems. This project aims to determine the corrosion behaviour of chromia-scale forming iron- and nickel-base alloys in the presence of deposits (coal ashes and salts) under carbon dioxide rich gas atmospheres. The increased understanding of alloy behaviour in hot corrosive ashes and gases, will permit more effective materials design and selection leading to more efficient and economic technologies for reliable and low cost carbon capture in energy production, waste-energy conversion and related industries.Read moreRead less
High temperature corrosion induced by multiple secondary oxidants . Heat resisting chromia-forming alloys passivate successfully in clean, dry air at temperatures up to about 950°C. However, this performance is degraded by secondary oxidants (carbon, sulphur, chlorine, water vapour), leading to corrosion failure in important industries. The project aims to investigate the effect of these secondary oxidants on corrosion behaviour of chromia-forming alloys, to identify interactions between multipl ....High temperature corrosion induced by multiple secondary oxidants . Heat resisting chromia-forming alloys passivate successfully in clean, dry air at temperatures up to about 950°C. However, this performance is degraded by secondary oxidants (carbon, sulphur, chlorine, water vapour), leading to corrosion failure in important industries. The project aims to investigate the effect of these secondary oxidants on corrosion behaviour of chromia-forming alloys, to identify interactions between multiple oxidants within the scale, to establish the mechanisms of oxide scale penetration by foreign species, and to evaluate scales on different alloy types. The results will provide a basis for improved design/selection of heat resisting chromia-forming alloys, key to power generation industries.Read moreRead less
Two-dimensional plasmonic heterogeneous nanostructures for photocatalysis. This project aims to design and explore two-dimensional heterogeneous photocatalysts that can convert solar energy into usable chemical energy. This project will investigate the correlation between surface plasmonic resonance and photocatalytic activities on the atomic level. Heterogeneous engineering and in-situ investigation of atomic-level photocatalytic dynamics is expected to yield several new full-solar-spectrum pho ....Two-dimensional plasmonic heterogeneous nanostructures for photocatalysis. This project aims to design and explore two-dimensional heterogeneous photocatalysts that can convert solar energy into usable chemical energy. This project will investigate the correlation between surface plasmonic resonance and photocatalytic activities on the atomic level. Heterogeneous engineering and in-situ investigation of atomic-level photocatalytic dynamics is expected to yield several new full-solar-spectrum photocatalysts. The project is expected to contribute to the understanding of the processes and mechanisms underlying photocatalysis, and lead to useable, stable and durable photocatalytics. The outcomes will enable efficient, cost-effective and reliable production of clean energy in a low-emission way.Read moreRead less
Heat-resisting iron-nickel base alloys in challenging new applications: oxygen permeabilities and resistance to internal oxidation. There is a pressing need to develop heat resisting alloys which can function adequately in higher operating temperatures and gas mixtures rich in carbon and hydrogen to be handled in advanced technologies for power generation. The expected outcomes of this project will provide the basis for design/selection of these more corrosion-resistant alloys.
Wearable thermoelectric textiles for portable microelectronics. Wearable thermoelectrics enable the power generation from the temperature difference between human body and ambient temperature by using thermoelectric effect. This project aims to design eco-friendly wearable thermoelectric textiles to realize high-efficiency solid-state power generation and meet individual needs with human comfort and health. The target is to achieve a power density in the as-designed thermoelectric textiles by th ....Wearable thermoelectric textiles for portable microelectronics. Wearable thermoelectrics enable the power generation from the temperature difference between human body and ambient temperature by using thermoelectric effect. This project aims to design eco-friendly wearable thermoelectric textiles to realize high-efficiency solid-state power generation and meet individual needs with human comfort and health. The target is to achieve a power density in the as-designed thermoelectric textiles by the optimization of materials and device design. The outcome will open up a new platform for the green and sustainable charge for portable microelectronics, which will lead to an innovative technology for energy management, which will place Australia at the forefront of wearable electronics and textile industry.Read moreRead less
Hybrid photocatalytic nanomaterials for water purification. This project aims to synthesise and characterise a range of porous photocatalytic materials (materials that absorb light to catalyse a reaction), and to establish high-throughput processes to simultaneously test the effectiveness of multiple photocatalytic materials. This interdisciplinary project expects to develop two new techniques that will lead to faster materials optimisation of materials that breakdown organic pollutants in water ....Hybrid photocatalytic nanomaterials for water purification. This project aims to synthesise and characterise a range of porous photocatalytic materials (materials that absorb light to catalyse a reaction), and to establish high-throughput processes to simultaneously test the effectiveness of multiple photocatalytic materials. This interdisciplinary project expects to develop two new techniques that will lead to faster materials optimisation of materials that breakdown organic pollutants in water under light irradiation. The intended outcomes include the production of industrially relevant photocatalysts and building capability in Australia to decrease photocatalytic testing time and cost. This should provide significant benefits to industry and the environment, and have an impact on human health.Read moreRead less