Surface engineering of biomaterials for optimal bone bonding characteristics. The ideal bone-implant material is hydroxyapatite. Chemically similar to bone mineral, hydroxyapatite is capable of inducing bone ongrowth. An ideal surface coating for metal hip implants, plasma spraying has been the preferred commercial hydroxyapatite coating technique. Until recently, it was always presumed that the bioactivity of hydroxyapatite resulted from its surface chemistry. However, a recent study has shown ....Surface engineering of biomaterials for optimal bone bonding characteristics. The ideal bone-implant material is hydroxyapatite. Chemically similar to bone mineral, hydroxyapatite is capable of inducing bone ongrowth. An ideal surface coating for metal hip implants, plasma spraying has been the preferred commercial hydroxyapatite coating technique. Until recently, it was always presumed that the bioactivity of hydroxyapatite resulted from its surface chemistry. However, a recent study has shown that the bioactivity of HAp coatings strongly correlates with surface roughness on the scale of bone cells. This project will explore cell-attachment behaviour for hydroxyapatite coatings prepared by plasma spraying compared with engineered surface morphology/chemistry by microlithography and vapour coating.Read moreRead less
Functionally graded fibre-polymer composites: a novel material for spinal disk prostheses. Chronic back pain affects a significant proportion of the population and is primarily caused by failure of the spinal disk. A strong social/economic imperative exists to develop engineering solutions to this problem. This project concerns the development of a novel fibre-polymer functionally graded composite material that mimics the structure of the spinal disk. The spinal disk comprises a soft core (nucle ....Functionally graded fibre-polymer composites: a novel material for spinal disk prostheses. Chronic back pain affects a significant proportion of the population and is primarily caused by failure of the spinal disk. A strong social/economic imperative exists to develop engineering solutions to this problem. This project concerns the development of a novel fibre-polymer functionally graded composite material that mimics the structure of the spinal disk. The spinal disk comprises a soft core (nucleus) and a tough fibrous periphery (annulus). The graded composite approach of this proposal represents a significant advance over spinal fusion, and over the alternative spinal disk protheses in clinical use or in the patent literature.Read moreRead less
The development of flexible, graded plasma surface engineered coatings for superior interfacial performance. The next generation of intraocular lenses, medical devices to treat patients with cataracts, will be developed through application of advanced surface engineering technologies. These superior coated lenses will improve biocompatibility and function, leading to additional benefit for the forecasted 2.7 million Australians with cataracts by 2021.
Reducing gas and ash corrosion in advanced power generation. Advanced power generation using new coal combustion technologies increases energy efficiency and makes carbon dioxide capture possible, but increases the corrosion problems. This project aims to determine the corrosion behaviour of chromia-scale forming iron- and nickel-base alloys in the presence of deposits (coal ashes and salts) under carbon dioxide rich gas atmospheres. The increased understanding of alloy behaviour in hot corrosiv ....Reducing gas and ash corrosion in advanced power generation. Advanced power generation using new coal combustion technologies increases energy efficiency and makes carbon dioxide capture possible, but increases the corrosion problems. This project aims to determine the corrosion behaviour of chromia-scale forming iron- and nickel-base alloys in the presence of deposits (coal ashes and salts) under carbon dioxide rich gas atmospheres. The increased understanding of alloy behaviour in hot corrosive ashes and gases, will permit more effective materials design and selection leading to more efficient and economic technologies for reliable and low cost carbon capture in energy production, waste-energy conversion and related industries.Read moreRead less
High temperature corrosion induced by multiple secondary oxidants . Heat resisting chromia-forming alloys passivate successfully in clean, dry air at temperatures up to about 950°C. However, this performance is degraded by secondary oxidants (carbon, sulphur, chlorine, water vapour), leading to corrosion failure in important industries. The project aims to investigate the effect of these secondary oxidants on corrosion behaviour of chromia-forming alloys, to identify interactions between multipl ....High temperature corrosion induced by multiple secondary oxidants . Heat resisting chromia-forming alloys passivate successfully in clean, dry air at temperatures up to about 950°C. However, this performance is degraded by secondary oxidants (carbon, sulphur, chlorine, water vapour), leading to corrosion failure in important industries. The project aims to investigate the effect of these secondary oxidants on corrosion behaviour of chromia-forming alloys, to identify interactions between multiple oxidants within the scale, to establish the mechanisms of oxide scale penetration by foreign species, and to evaluate scales on different alloy types. The results will provide a basis for improved design/selection of heat resisting chromia-forming alloys, key to power generation industries.Read moreRead less
Two-dimensional plasmonic heterogeneous nanostructures for photocatalysis. This project aims to design and explore two-dimensional heterogeneous photocatalysts that can convert solar energy into usable chemical energy. This project will investigate the correlation between surface plasmonic resonance and photocatalytic activities on the atomic level. Heterogeneous engineering and in-situ investigation of atomic-level photocatalytic dynamics is expected to yield several new full-solar-spectrum pho ....Two-dimensional plasmonic heterogeneous nanostructures for photocatalysis. This project aims to design and explore two-dimensional heterogeneous photocatalysts that can convert solar energy into usable chemical energy. This project will investigate the correlation between surface plasmonic resonance and photocatalytic activities on the atomic level. Heterogeneous engineering and in-situ investigation of atomic-level photocatalytic dynamics is expected to yield several new full-solar-spectrum photocatalysts. The project is expected to contribute to the understanding of the processes and mechanisms underlying photocatalysis, and lead to useable, stable and durable photocatalytics. The outcomes will enable efficient, cost-effective and reliable production of clean energy in a low-emission way.Read moreRead less
Heat-resisting iron-nickel base alloys in challenging new applications: oxygen permeabilities and resistance to internal oxidation. There is a pressing need to develop heat resisting alloys which can function adequately in higher operating temperatures and gas mixtures rich in carbon and hydrogen to be handled in advanced technologies for power generation. The expected outcomes of this project will provide the basis for design/selection of these more corrosion-resistant alloys.
Wearable thermoelectric textiles for portable microelectronics. Wearable thermoelectrics enable the power generation from the temperature difference between human body and ambient temperature by using thermoelectric effect. This project aims to design eco-friendly wearable thermoelectric textiles to realize high-efficiency solid-state power generation and meet individual needs with human comfort and health. The target is to achieve a power density in the as-designed thermoelectric textiles by th ....Wearable thermoelectric textiles for portable microelectronics. Wearable thermoelectrics enable the power generation from the temperature difference between human body and ambient temperature by using thermoelectric effect. This project aims to design eco-friendly wearable thermoelectric textiles to realize high-efficiency solid-state power generation and meet individual needs with human comfort and health. The target is to achieve a power density in the as-designed thermoelectric textiles by the optimization of materials and device design. The outcome will open up a new platform for the green and sustainable charge for portable microelectronics, which will lead to an innovative technology for energy management, which will place Australia at the forefront of wearable electronics and textile industry.Read moreRead less
Hybrid photocatalytic nanomaterials for water purification. This project aims to synthesise and characterise a range of porous photocatalytic materials (materials that absorb light to catalyse a reaction), and to establish high-throughput processes to simultaneously test the effectiveness of multiple photocatalytic materials. This interdisciplinary project expects to develop two new techniques that will lead to faster materials optimisation of materials that breakdown organic pollutants in water ....Hybrid photocatalytic nanomaterials for water purification. This project aims to synthesise and characterise a range of porous photocatalytic materials (materials that absorb light to catalyse a reaction), and to establish high-throughput processes to simultaneously test the effectiveness of multiple photocatalytic materials. This interdisciplinary project expects to develop two new techniques that will lead to faster materials optimisation of materials that breakdown organic pollutants in water under light irradiation. The intended outcomes include the production of industrially relevant photocatalysts and building capability in Australia to decrease photocatalytic testing time and cost. This should provide significant benefits to industry and the environment, and have an impact on human health.Read moreRead less