Linkage Infrastructure, Equipment And Facilities - Grant ID: LE120100098
Funder
Australian Research Council
Funding Amount
$230,000.00
Summary
A comprehensive gas/vapour sorption facility for the fast advancement of decarbonised energy technologies. Solutions to clean energy production, storage and use are critical to Australia’s prosperity, yet there is a significant lack of targeted research facilities for the development of the highly needed materials and technologies for powering a sustainable Australia. This facility will bring research efforts closer to practical solutions.
Carbon-Supported Iron Catalysts for Selective Catalytic Reduction of NO. Nitric oxide (NO) is a major pollutant from combustion systems. This project aims to develop cost-effective and environmentally benign zerovalent iron catalysts supported on carbon material for selective catalytic reduction (SCR) of NO using CO and unburned hydrocarbons as in-situ reductants. By applying differential reactor experimentation, kinetic modelling and advanced material characterisation techniques, the research w ....Carbon-Supported Iron Catalysts for Selective Catalytic Reduction of NO. Nitric oxide (NO) is a major pollutant from combustion systems. This project aims to develop cost-effective and environmentally benign zerovalent iron catalysts supported on carbon material for selective catalytic reduction (SCR) of NO using CO and unburned hydrocarbons as in-situ reductants. By applying differential reactor experimentation, kinetic modelling and advanced material characterisation techniques, the research will unravel complex relationships among catalyst structural features and activity, NO reduction mechanisms, and catalyst performance under practically relevant combustion conditions that underpin the development of an effective yet affordable SCR technology to control NO emission from industrial utilities and automobiles.Read moreRead less
Nano-engineered catalysts for sustainable fuel production from waste . This project aims to address two major problems simultaneously-reducing the burden of non-recyclable waste currently going to landfill in Australia, and offsetting Australia’s reliance on imported diesel to support industry and transport needs. While approximately 95% of diesel consumed in Australia is imported, vast quantities of carbon-based waste ends up in landfill. Municipal Solid Waste (MSW) is a mixture of plant-based ....Nano-engineered catalysts for sustainable fuel production from waste . This project aims to address two major problems simultaneously-reducing the burden of non-recyclable waste currently going to landfill in Australia, and offsetting Australia’s reliance on imported diesel to support industry and transport needs. While approximately 95% of diesel consumed in Australia is imported, vast quantities of carbon-based waste ends up in landfill. Municipal Solid Waste (MSW) is a mixture of plant-based waste (including food, garden, paper, and wood) and fossil-fuel derived materials (plastics). Using an innovative and environmentally-sustainable catalytic process, the outcomes of this project are aimed alleviating Australia’s dependence on diesel fuel imports and better waste management solutions in Australia.Read moreRead less
Electrochemical conversion of carbon dioxide to formic acid. This project aims to develop economical and scalable carbon dioxide electrochemical technologies to convert carbon dioxide in blast furnace flue gas to formic acid as a value-added product in steel-making plants. The project expects to develop new electrochemical catalysts, to optimise the structure of electrodes and ultimately improve carbon dioxide conversion efficiency and reaction selectivity towards formic acid. The expected outco ....Electrochemical conversion of carbon dioxide to formic acid. This project aims to develop economical and scalable carbon dioxide electrochemical technologies to convert carbon dioxide in blast furnace flue gas to formic acid as a value-added product in steel-making plants. The project expects to develop new electrochemical catalysts, to optimise the structure of electrodes and ultimately improve carbon dioxide conversion efficiency and reaction selectivity towards formic acid. The expected outcomes of this project will provide an efficient and economically viable electrochemical technology to convert carbon dioxide to a valuable product such as formic acid or syngas, with the potential to significantly reduce the emission of carbon dioxide from steel-making processes and coal-fired power plants.Read moreRead less
Unlocking the catalytic activity of metal oxides through hybrid catalysis. This project aims to understand the interaction of light responsive nano-metals and metal oxide supports in photo-thermal catalysis, and channel light and heat to efficiently drive catalytic reactions. From this understanding, it will develop principles to activate the active site of metal oxides and control catalytic activity with high selectivity and stability. It will use this knowledge to selectively oxidate methane a ....Unlocking the catalytic activity of metal oxides through hybrid catalysis. This project aims to understand the interaction of light responsive nano-metals and metal oxide supports in photo-thermal catalysis, and channel light and heat to efficiently drive catalytic reactions. From this understanding, it will develop principles to activate the active site of metal oxides and control catalytic activity with high selectivity and stability. It will use this knowledge to selectively oxidate methane and oxidative coupling of methane reactions. The expected outcome is an inexpensive green catalysis method for chemical manufacture. This should lower the amount of waste, decrease energy consumption and improve human health, finite global resources and quality of life.Read moreRead less
Cold catalysis for water splitting. This project aims to develop photocatalysts via AC magnetic field through nanoscale heating for efficient H2 generation. This project is to introduce cold catalysis concept, which heats catalysts only but not solution, thus called cold catalysis, in the area of production of renewable energy. Expected outcome is the creation of clean and low cost catalysts to effectively harvest the chemical energy from the sun via splitting of water into H2 and O2 without cau ....Cold catalysis for water splitting. This project aims to develop photocatalysts via AC magnetic field through nanoscale heating for efficient H2 generation. This project is to introduce cold catalysis concept, which heats catalysts only but not solution, thus called cold catalysis, in the area of production of renewable energy. Expected outcome is the creation of clean and low cost catalysts to effectively harvest the chemical energy from the sun via splitting of water into H2 and O2 without causing any environmental damage. This unique technology will also help to address clean energy generation, which is in line with H2 economy plan by Australia government, and provide opportunities for new industries that will benefit Australian economy.Read moreRead less
Syngas Production Using Catalytic Carbon Dioxide Dry Reforming. This project intends to pave the way for turning remote low-value Australian resources and greenhouse gases into valuable products. Most of Australian natural gas reserves are located in the remote north-west shelf, and many are small scale and thus cannot be economically harnessed using conventional methods such as pipeline transportation or gas liquefaction. In this project, a dry reforming reactor with novel catalysts will be des ....Syngas Production Using Catalytic Carbon Dioxide Dry Reforming. This project intends to pave the way for turning remote low-value Australian resources and greenhouse gases into valuable products. Most of Australian natural gas reserves are located in the remote north-west shelf, and many are small scale and thus cannot be economically harnessed using conventional methods such as pipeline transportation or gas liquefaction. In this project, a dry reforming reactor with novel catalysts will be designed for converting natural gas and carbon dioxide to syngas, which is an intermediate step of gas-to-liquid plant. By innovatively integrating advanced catalysis and heating technologies, reactor weight and operational costs will be minimised.Read moreRead less
3-D Printed Catalytic Monoliths for Energy Efficient Carbon Conversion. Carbon Capture and Utilisation (CCU) is an essential pathway for reducing carbon in the Earth's atmosphere. However a major hurdle in the carbon utilisation part is that the conversion technologies often rely on energy derived from fossil sources. Electrification of carbon conversion processes can overcome this hurdle by providing this energy via renewables. This project aims to develop an electrically powered energy efficie ....3-D Printed Catalytic Monoliths for Energy Efficient Carbon Conversion. Carbon Capture and Utilisation (CCU) is an essential pathway for reducing carbon in the Earth's atmosphere. However a major hurdle in the carbon utilisation part is that the conversion technologies often rely on energy derived from fossil sources. Electrification of carbon conversion processes can overcome this hurdle by providing this energy via renewables. This project aims to develop an electrically powered energy efficient catalytic process for carbon conversion. A modular 3-D printed monolithic catalytic reactor prototype powered by induction or resistive heating will be developed to minimise energy loss in the carbon conversion process. An expected outcome of this project is translation of this prototype in a CCU pilot scale facility.Read moreRead less
A New Photocatalytic System for Solar-to-Chemical Energy Conversion. The expected outcomes of this program are a new class of photocatalyst systems for converting waste products into valuable chemicals using solar energy. Using advanced materials and photocatalysis, the project aims to develop a new class of bi-functional photoelectrochemical (PEC) systems for application in waste brine treatment and valuable chemical generation. The key concept lies in the innovative design of layered semicondu ....A New Photocatalytic System for Solar-to-Chemical Energy Conversion. The expected outcomes of this program are a new class of photocatalyst systems for converting waste products into valuable chemicals using solar energy. Using advanced materials and photocatalysis, the project aims to develop a new class of bi-functional photoelectrochemical (PEC) systems for application in waste brine treatment and valuable chemical generation. The key concept lies in the innovative design of layered semiconductors as efficient and stable photocatalysts and their integration into PEC reaction systems for simultaneous solar hydrogen and valuable chemicals (eg bromine) generation from brine. The project aims to advance fundamental understanding of the photocatalytic water-splitting concept to other waste product splitting.Read moreRead less
Designing a photo-electro-catalysis system for selective organic oxidation. The research aims to establish new composite materials to enable realisation of next generation organic electrolysers for renewable hydrogen production. Water electrolysis is seen as the front-running technology in Australia's drive to be a renewable hydrogen exporter. Significant opportunity exists in adopting organic electrolysis as an alternative with additional benefits, including lower energy input and value-added c ....Designing a photo-electro-catalysis system for selective organic oxidation. The research aims to establish new composite materials to enable realisation of next generation organic electrolysers for renewable hydrogen production. Water electrolysis is seen as the front-running technology in Australia's drive to be a renewable hydrogen exporter. Significant opportunity exists in adopting organic electrolysis as an alternative with additional benefits, including lower energy input and value-added chemical production (alongside H2), off-setting costs. Challenges exist with controlling organic product selectivity and restricting carbon dioxide generation. The project intends to deliver a system which uses complementary phenomena (light activation, controllable polarity, magnetic response) to resolve said challenges. Read moreRead less