Novel injection moulded polymer substrates for solid phase applications. Solid phase organic reactions form the basis of many applications in drug design and development and medical applications. This project proposes the development of novel solid phase materials via control of novel insitu crosslinking and foaming processes and novel process molding control. This will enable more controlled large scale rapid production and detection of materials for biological and medical uses.
Fatigue thresholds, crack initiation and small crack growth phenomenon in uPVC, mPVC and Oriented PVC pipes. Unplasticised polyvinylchloride (uPVC) is currently used for water reticulation pipelines. These are subject to variable pressure which can lead to fatigue failures. Improved materials, modified PVC (mPVC) and oriented PVC (oPVC), are now entering this market. uPVC shows a fatigue threshold when prenotched samples are tested. The fatigue threshold is an important design concept since it r ....Fatigue thresholds, crack initiation and small crack growth phenomenon in uPVC, mPVC and Oriented PVC pipes. Unplasticised polyvinylchloride (uPVC) is currently used for water reticulation pipelines. These are subject to variable pressure which can lead to fatigue failures. Improved materials, modified PVC (mPVC) and oriented PVC (oPVC), are now entering this market. uPVC shows a fatigue threshold when prenotched samples are tested. The fatigue threshold is an important design concept since it represents the stress amplitude below which fatigue failures should not occur. Its existence in unnotched pipes and in the newer PVC materials is uncertain. This project will quantify fatigue thresholds and the mechanisms involved in crack initiation in uPVC , mPVC and oPVC.Read moreRead less
Self Assembling Polymers for Novel Packaging Products. Have you had wet paper bags rip or stacks of boxes collapse during shipping? Novel polymer strength agents will be combined with nanoparticles to develop very strong paper packaging meeting Australia's needs. We will produce very strong paper packaging resisting frequent moisture changes while remaining fully recyclable. These strength agents will be produced and used in Australia to manufacture the fibre packaging needed to ship our manufac ....Self Assembling Polymers for Novel Packaging Products. Have you had wet paper bags rip or stacks of boxes collapse during shipping? Novel polymer strength agents will be combined with nanoparticles to develop very strong paper packaging meeting Australia's needs. We will produce very strong paper packaging resisting frequent moisture changes while remaining fully recyclable. These strength agents will be produced and used in Australia to manufacture the fibre packaging needed to ship our manufactured and agriculture goods within Australia and for export. The Paper industry is the largest manufacturing industry in rural Australia with sales of $4 billion and 5,900 direct and 85,000 indirect jobs.Read moreRead less
Optimising paint adhesion to polymers. The Australian automotive export market (vehicles, parts, engines) is worth approximately $4,500 million p.a. and is a major employer in many areas. A reliable, cheap and efficient method for preparing polymer surfaces for painting will significantly benefit that market. The ability to manufacture quality, cheaper, lightweight parts improves the competitiveness of the local automotive industry. More importantly, a technology for production of cheap, high qu ....Optimising paint adhesion to polymers. The Australian automotive export market (vehicles, parts, engines) is worth approximately $4,500 million p.a. and is a major employer in many areas. A reliable, cheap and efficient method for preparing polymer surfaces for painting will significantly benefit that market. The ability to manufacture quality, cheaper, lightweight parts improves the competitiveness of the local automotive industry. More importantly, a technology for production of cheap, high quality painted polymer surfaces vastly improves the competitiveness of local component manufacturers who supply to international vehicle manufacturers. This project falls under the National Research Priority Area 'Frontier Technologies for Building and Transforming Australian Industries'.Read moreRead less
Development of PVC-Based Polymer Nanocomposites. The aim of the project is to develop a PVC polymer nanocomposite material to be used in water pipelines. It has been found that the inclusion of a nanoparticle phase, in this case calcium carbonate, leads to increases in strength, stiffness, toughness and abrasion resistance. This proposed project will develop and assess an optimum material in addition to investigating the mechanisms of deformation.
An investigation of the mechanism of lacquer adhesion failure on electrolytic tinplate. "Tin" cans used for food packaging are actually made from tin-plated steel and, in most cases, the metal is coated with a lacquer. This lacquer is required to protect the can from corrosion and the contents from taint. The incidence of adhesion failure between the metal and the lacquer has increased recently for unknown reasons, causing considerable economic loss. This project will investigate the mechanisms ....An investigation of the mechanism of lacquer adhesion failure on electrolytic tinplate. "Tin" cans used for food packaging are actually made from tin-plated steel and, in most cases, the metal is coated with a lacquer. This lacquer is required to protect the can from corrosion and the contents from taint. The incidence of adhesion failure between the metal and the lacquer has increased recently for unknown reasons, causing considerable economic loss. This project will investigate the mechanisms of adhesion failure and improve our fundamental understanding of the problem. The results will be used to enable the selection of process conditions and lacquers that are more robust and reduce the incidence of adhesion failure.Read moreRead less
Condition monitoring and process control of injection molding. Injection molding has been widely used in automotive industry and improvement of the productivity and quality of the products is very important for the injection molding production to be internationally competitive. The aim of this project is to develop a condition monitoring and process control system to monitor the key parameters of the injection molding processes, to optimise the design and process conditions, and consequently, to ....Condition monitoring and process control of injection molding. Injection molding has been widely used in automotive industry and improvement of the productivity and quality of the products is very important for the injection molding production to be internationally competitive. The aim of this project is to develop a condition monitoring and process control system to monitor the key parameters of the injection molding processes, to optimise the design and process conditions, and consequently, to more actively control the processes. This will lead to an more reliable process, improved productivity and production of higher quality of moldings.Read moreRead less
Bioactive Polymers for Wound Healing Applications. VitroGroR is a growth factor complex which enhances cell growth and migration, and hence has great potential for treating wounds. Tissue Therapies, which holds the rights to commercialization of VitroGroR, is seeking to develop methods of delivering VitroGroR in its active form to the wound environment. Two solutions to this problem will be developed in this project; a bioactive bandage containing a novel combination of microspheres and a hydrog ....Bioactive Polymers for Wound Healing Applications. VitroGroR is a growth factor complex which enhances cell growth and migration, and hence has great potential for treating wounds. Tissue Therapies, which holds the rights to commercialization of VitroGroR, is seeking to develop methods of delivering VitroGroR in its active form to the wound environment. Two solutions to this problem will be developed in this project; a bioactive bandage containing a novel combination of microspheres and a hydrogel matrix, and secondly an in-situ polymerisable matrix for treatment of deep wounds. The growth factor complex will be protected from aggressive proteases through encapsulation within microspheres, and the use of MMP-inhibiting comonomers.Read moreRead less
Enhancing the performance of high voltage direct current power cables by studying space charge accumulation in their synthetic polymeric insulation. Synthetic polymeric insulation has proved very successful in high voltage alternating current power transmission cables, and cable manufacturers have therefore sought to use it in high voltage direct current (HVDC) cables, for which there is a rapidly growing demand. Yet the accumulation of space charge in such cables presently severely limits the m ....Enhancing the performance of high voltage direct current power cables by studying space charge accumulation in their synthetic polymeric insulation. Synthetic polymeric insulation has proved very successful in high voltage alternating current power transmission cables, and cable manufacturers have therefore sought to use it in high voltage direct current (HVDC) cables, for which there is a rapidly growing demand. Yet the accumulation of space charge in such cables presently severely limits the maximum operating voltage and transmitted power. Nearly all this space charge is due to the temperature gradient in the insulation. We will analyze space charge profiles in polyethylene and other synthetic polymers, and derive basic scientific data which will inform the design of HVDC cables with greatly enhanced performance.Read moreRead less
Condition Assessment of Medium-Voltage XLPE-Insulated Cables Degraded by Water Treeing. In Australia degraded underground XLPE cables are causing disruption of electricity supplies and high community costs. There is no reliable non-invasive technique for prediction of cable condition to optimise cable replacement and refurbishment. In this project a large-scale experiment will be undertaken on 22 kV cables to ascertain the effectiveness of a new cable refurbishment technology. New techniques for ....Condition Assessment of Medium-Voltage XLPE-Insulated Cables Degraded by Water Treeing. In Australia degraded underground XLPE cables are causing disruption of electricity supplies and high community costs. There is no reliable non-invasive technique for prediction of cable condition to optimise cable replacement and refurbishment. In this project a large-scale experiment will be undertaken on 22 kV cables to ascertain the effectiveness of a new cable refurbishment technology. New techniques for assessment of cable condition will be developed using unique data from the ageing experiment and computer models of fundamental phenomena. Successful conclusions from this project will save the industry partner and other electricity distribution companies tens of millions of dollars.Read moreRead less