Unravelling mechanisms in plasma growth of polymers. Surface engineering broadens the breadth of applications for many materials, and enhances the performance and value of current and emerging technologies. Surface engineering is particularly important to maintaining the competitiveness of manufacturing in developed economies such as Australia, that can not compete on a cost basis with emerging economies. Plasma coating replaces (alternative) environmentally-questionable surface treatments. This ....Unravelling mechanisms in plasma growth of polymers. Surface engineering broadens the breadth of applications for many materials, and enhances the performance and value of current and emerging technologies. Surface engineering is particularly important to maintaining the competitiveness of manufacturing in developed economies such as Australia, that can not compete on a cost basis with emerging economies. Plasma coating replaces (alternative) environmentally-questionable surface treatments. This project enhances Australian competitiveness; it cuts across industrial sectors and will deliver the new knowledge required to enhance material/technology functionality/performance. A PhD student will receive a multi-disciplinary training in a frontier technology and advanced analytical tools.Read moreRead less
Condition monitoring and process control of injection molding. Injection molding has been widely used in automotive industry and improvement of the productivity and quality of the products is very important for the injection molding production to be internationally competitive. The aim of this project is to develop a condition monitoring and process control system to monitor the key parameters of the injection molding processes, to optimise the design and process conditions, and consequently, to ....Condition monitoring and process control of injection molding. Injection molding has been widely used in automotive industry and improvement of the productivity and quality of the products is very important for the injection molding production to be internationally competitive. The aim of this project is to develop a condition monitoring and process control system to monitor the key parameters of the injection molding processes, to optimise the design and process conditions, and consequently, to more actively control the processes. This will lead to an more reliable process, improved productivity and production of higher quality of moldings.Read moreRead less
Special Research Initiatives - Grant ID: SR0354521
Funder
Australian Research Council
Funding Amount
$10,000.00
Summary
Network for Advanced Materials for Engineering Applications. Advances in modern technology and a competitive manufacturing industry depend critically on new and improved materials. The pace of change is rapid, and many countries are taking steps to improve and coordinate developments. Australia has a very successful record of materials research and innovation and is developing a substantial infrastructure in the area. However, the materials research community is scattered, and research effect ....Network for Advanced Materials for Engineering Applications. Advances in modern technology and a competitive manufacturing industry depend critically on new and improved materials. The pace of change is rapid, and many countries are taking steps to improve and coordinate developments. Australia has a very successful record of materials research and innovation and is developing a substantial infrastructure in the area. However, the materials research community is scattered, and research effectiveness is sometimes lessened by a lack of critical mass. This network will bring together university, government and industry researchers, and promote collaborative research, access to each other's facilities, staff and student exchanges, improved access to existing infrastructure and coordinated planning for new acquisitions.Read moreRead less
Preventing biological growth – a new generation anti-biofouling coatings. The project aims to improve anti-biofouling technology by developing a ‘smart and green’ coating that requires no toxic biocides and makes use of copper already present in the water. Biofouling is the unwanted attachment and growth on surfaces in water; it causes significant problems on ships and in drinking water systems, and damages infrastructure and capital investment. Biofouling also carries a significant risk of spre ....Preventing biological growth – a new generation anti-biofouling coatings. The project aims to improve anti-biofouling technology by developing a ‘smart and green’ coating that requires no toxic biocides and makes use of copper already present in the water. Biofouling is the unwanted attachment and growth on surfaces in water; it causes significant problems on ships and in drinking water systems, and damages infrastructure and capital investment. Biofouling also carries a significant risk of spreading diseases and environmental damage through the introduction of invasive marine species. Existing coatings release highly toxic substances into the water, causing untold environmental damage. This project offers a single, comprehensive solution for all of the above problems.Read moreRead less
The development of super-toughened epoxies using a novel nanomaterial. Epoxy resins are widely used as structural adhesives and coatings in engineering structures. This project will address the problem of the intrinsic brittleness of epoxy by making it significantly tougher with superior performance and cost-effectiveness. Our technology for producing super-toughened epoxy will lead to a wide range of applications for new and existing products in the construction, automotive, aerospace, adhesive ....The development of super-toughened epoxies using a novel nanomaterial. Epoxy resins are widely used as structural adhesives and coatings in engineering structures. This project will address the problem of the intrinsic brittleness of epoxy by making it significantly tougher with superior performance and cost-effectiveness. Our technology for producing super-toughened epoxy will lead to a wide range of applications for new and existing products in the construction, automotive, aerospace, adhesive and microelectronics industries.Read moreRead less
Novel Waterborne Multifunctional Sealer for Asphalt Pavement. One of the long-term challenges and most serious problems faced by the asphalt surfacing and road construction industry is the rapid deterioration of asphaltic surfaces to the extent that they become unfit/unsafe for use in short time. The length of the Australian local government road system is approximately 810,000 kilometres and currently approximately $2,460 million/year is spent on road maintenance; the replacement value of ....Novel Waterborne Multifunctional Sealer for Asphalt Pavement. One of the long-term challenges and most serious problems faced by the asphalt surfacing and road construction industry is the rapid deterioration of asphaltic surfaces to the extent that they become unfit/unsafe for use in short time. The length of the Australian local government road system is approximately 810,000 kilometres and currently approximately $2,460 million/year is spent on road maintenance; the replacement value of the road asset exceeds $106,000 million. Thus providing satisfactory tough protective shield on asphalt pavements that locks out destructive elements and provide long-term protection is of enormous economic importance and national/community benefit.Read moreRead less
Novel plastics using renewable signal chemistry to remove bacteria in water. This project plans to develop synthetic plastic surfaces that continuously generate nitric oxide to deter the formation of biofilms. Plastic surfaces exposed to aqueous environments rapidly become covered by a film of bacteria, which can cause infection. Trace levels of generated nitric oxide can combat this problem by breaking up existing bacterial biofilms. Current research has developed plastics that continuously gen ....Novel plastics using renewable signal chemistry to remove bacteria in water. This project plans to develop synthetic plastic surfaces that continuously generate nitric oxide to deter the formation of biofilms. Plastic surfaces exposed to aqueous environments rapidly become covered by a film of bacteria, which can cause infection. Trace levels of generated nitric oxide can combat this problem by breaking up existing bacterial biofilms. Current research has developed plastics that continuously generate nitric oxide, but not for extended periods of time. This project’s approach is significant because it avoids bacterial resistance to the nitric oxide treatment. Applications of this technology may include removing biofilms from environments such as water filtration devices and consumable medical surfaces.Read moreRead less
Electrically conductive elastomeric composites by nanomaterials. Electrically conductive elastomeric composites by nanomaterials. This project aims to develop electrically conductive, mechanically robust, cost-effective elastomeric composites, by exploring new processing methods and studying the synergy between graphene sheets and multi-walled carbon nanotubes. Composites will be design, research and manufactured to suit the fabrication of rolling-resistance sensors that detect early-stage malfu ....Electrically conductive elastomeric composites by nanomaterials. Electrically conductive elastomeric composites by nanomaterials. This project aims to develop electrically conductive, mechanically robust, cost-effective elastomeric composites, by exploring new processing methods and studying the synergy between graphene sheets and multi-walled carbon nanotubes. Composites will be design, research and manufactured to suit the fabrication of rolling-resistance sensors that detect early-stage malfunctioning idler rolls. This technology could prevent the breakage of conveyor belts which are essential to the mining, processing and transportation of loose bulk materials; and improve the design and manufacturing of flexible sensors.Read moreRead less
Development of Multilayered Packaging Materials with Controlled Barrier Properties. The project aims to develop advanced new material for multilayered packaging with high oxygen and moisture barrier properties for cost effective packaging applications. Poly Products currently imports and uses some polymer as its key component for controlling barrier property of their food packaging. However, the new nanostructured material when sandwiched between less expensive materials in a multilayered packag ....Development of Multilayered Packaging Materials with Controlled Barrier Properties. The project aims to develop advanced new material for multilayered packaging with high oxygen and moisture barrier properties for cost effective packaging applications. Poly Products currently imports and uses some polymer as its key component for controlling barrier property of their food packaging. However, the new nanostructured material when sandwiched between less expensive materials in a multilayered packaging film will yield excellent barrier properties, leading to extended shelf life of different food products. The new smart material will generate significant material saving and replace the imported polymer, and will secure export market of the product in Asia -Pacific region.Read moreRead less
Environmentally benign polymer solar cells. The project aims to prepare polymer solar cells, by developing water-compatible conjugated materials for the active layer. This technology would be cost-efficient and not use environmentally harmful solvents. The project would achieve aqueous compatibility of these hydrophobic molecules through substitution and careful positioning of functional groups. Fabrication processes will be optimised to incorporate these materials into solar cells, with a focus ....Environmentally benign polymer solar cells. The project aims to prepare polymer solar cells, by developing water-compatible conjugated materials for the active layer. This technology would be cost-efficient and not use environmentally harmful solvents. The project would achieve aqueous compatibility of these hydrophobic molecules through substitution and careful positioning of functional groups. Fabrication processes will be optimised to incorporate these materials into solar cells, with a focus on controlling the morphology of the active material. Determining the relationships between conjugated molecular design and cell performance should provide a new direction in solar-cell technology.Read moreRead less