Polymerization of amyloid fibrils and electroactive hybrid nanowires using ionic liquids. The electronics world is constantly shrinking with devices being miniaturised and increasing levels of complexity built in. To maintain this trend, new technologies and new device fabrication approaches are required. APD Byrne, will develop new materials based on amyloid fibrils by their facile conversion to a range of novel high strength electroactive nanoscopic wires with application in many electronic d ....Polymerization of amyloid fibrils and electroactive hybrid nanowires using ionic liquids. The electronics world is constantly shrinking with devices being miniaturised and increasing levels of complexity built in. To maintain this trend, new technologies and new device fabrication approaches are required. APD Byrne, will develop new materials based on amyloid fibrils by their facile conversion to a range of novel high strength electroactive nanoscopic wires with application in many electronic devices. One such device that will benefit from these nanowires is organic solar cells. Solar is a clean renewable energy source that can reduce Australia's dependence on fossil fuels. The development of new approaches and materials aimed at increasing solar cell efficiencies is an important outcome for Australia.Read moreRead less
Development of PVC-Based Polymer Nanocomposites. The aim of the project is to develop a PVC polymer nanocomposite material to be used in water pipelines. It has been found that the inclusion of a nanoparticle phase, in this case calcium carbonate, leads to increases in strength, stiffness, toughness and abrasion resistance. This proposed project will develop and assess an optimum material in addition to investigating the mechanisms of deformation.
NANOSCALE NETWORKS OF ORGANIC POLYMER/C60 FULLERENE BLENDS FOR HIGH EFFICIENCY SOLAR CELLS. Recent demonstrations of increased efficiencies in polymer-fullerene blend plastic films provide the prospect of low cost photovoltaic elements with the potential for widespread application. Further progress with these materials is strongly indicated. We will characterise these materials at the nanoscale to make further improvements in film morphology and employ our expertise in experimental investigation ....NANOSCALE NETWORKS OF ORGANIC POLYMER/C60 FULLERENE BLENDS FOR HIGH EFFICIENCY SOLAR CELLS. Recent demonstrations of increased efficiencies in polymer-fullerene blend plastic films provide the prospect of low cost photovoltaic elements with the potential for widespread application. Further progress with these materials is strongly indicated. We will characterise these materials at the nanoscale to make further improvements in film morphology and employ our expertise in experimental investigation of transport properties to gain a more complete understanding of the electronic and photonic processes underlying photovoltaic efficiency. Australia is ideally situated geographically and has a strong tradition of inventive engineering from which we can benefit and capitalise significantly on further improvements in the materials to be investigated.Read moreRead less
Soft solids rheology and filled elastomeric networks. Elastomeric networks that have imbedded particles are considerably more difficult to model than unfilled networks because the imbedded particles deform the trajectory of the chains. Any treatment must incorporate this dual nature of the network. Our work will address this important issue with particular reference to two important materials - liquid crystalline elastomers and bread dough. We aim to produce an accurate mathematical description ....Soft solids rheology and filled elastomeric networks. Elastomeric networks that have imbedded particles are considerably more difficult to model than unfilled networks because the imbedded particles deform the trajectory of the chains. Any treatment must incorporate this dual nature of the network. Our work will address this important issue with particular reference to two important materials - liquid crystalline elastomers and bread dough. We aim to produce an accurate mathematical description of filled soft viscoelastic solids, which include compressibility and yielding - two important new features.Read moreRead less
THEORETICAL AND EXPERIMENTAL STUDIES OF BLOCK COPOLYMER MELTS AS NANO-MATERIALS. We shall theoretically study and predict the possible morphologies of a wide range of block copolymer architectures with a combination of simulations and accurate numerical theories. These block copolymer melts are of great technological importance because they can self-assemble into morphological patterns which are periodic on a nano-scale. Hence they are now being intensively investigated for uses in applications ....THEORETICAL AND EXPERIMENTAL STUDIES OF BLOCK COPOLYMER MELTS AS NANO-MATERIALS. We shall theoretically study and predict the possible morphologies of a wide range of block copolymer architectures with a combination of simulations and accurate numerical theories. These block copolymer melts are of great technological importance because they can self-assemble into morphological patterns which are periodic on a nano-scale. Hence they are now being intensively investigated for uses in applications as diverse as lithographic templates for electronic and optical devices, nano-porous membranes and photonic band gap materials. We shall verify our theoretical predictions by carrying out experiments on the various molecular architectures that we have studied theoretically.Read moreRead less
Special Research Initiatives - Grant ID: SR0354521
Funder
Australian Research Council
Funding Amount
$10,000.00
Summary
Network for Advanced Materials for Engineering Applications. Advances in modern technology and a competitive manufacturing industry depend critically on new and improved materials. The pace of change is rapid, and many countries are taking steps to improve and coordinate developments. Australia has a very successful record of materials research and innovation and is developing a substantial infrastructure in the area. However, the materials research community is scattered, and research effect ....Network for Advanced Materials for Engineering Applications. Advances in modern technology and a competitive manufacturing industry depend critically on new and improved materials. The pace of change is rapid, and many countries are taking steps to improve and coordinate developments. Australia has a very successful record of materials research and innovation and is developing a substantial infrastructure in the area. However, the materials research community is scattered, and research effectiveness is sometimes lessened by a lack of critical mass. This network will bring together university, government and industry researchers, and promote collaborative research, access to each other's facilities, staff and student exchanges, improved access to existing infrastructure and coordinated planning for new acquisitions.Read moreRead less
New Types of Biomimetic Nanostructured Adhesives. Adhesives are one of the main ways in which we join materials, and have many advantages over other methods of joining. In this work we will make a new class of adhesive using nanotechnology that attempts to copy the very fine-haired feet of animals such as geckos who can stick to almost any surface, under most conditions. We will make these adhesives over large surface areas, and thus they will have commercial possibilities in a range of high tec ....New Types of Biomimetic Nanostructured Adhesives. Adhesives are one of the main ways in which we join materials, and have many advantages over other methods of joining. In this work we will make a new class of adhesive using nanotechnology that attempts to copy the very fine-haired feet of animals such as geckos who can stick to almost any surface, under most conditions. We will make these adhesives over large surface areas, and thus they will have commercial possibilities in a range of high technology industries, as well as in harsh environments. Because we will be able to manipulate the structure and observe property changes, it should also give us a greater insight into the adhesion mechanisms used by many small animals and bugs.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0560981
Funder
Australian Research Council
Funding Amount
$160,940.00
Summary
Confronting the Challenges in Modern Spectroscopy of Polymers. Polymers and nanocomposites are increasingly being used in new, high value applications as diverse as medicine, structural engineering, optics and electronics. In order to control and understand polymer performance, a detailed knowledge of the chemical structure at all stages in their lifecycle is required - in the liquid, rubber and solid states and during degradation. This application seeks to establish a coordinated Polymer Spectr ....Confronting the Challenges in Modern Spectroscopy of Polymers. Polymers and nanocomposites are increasingly being used in new, high value applications as diverse as medicine, structural engineering, optics and electronics. In order to control and understand polymer performance, a detailed knowledge of the chemical structure at all stages in their lifecycle is required - in the liquid, rubber and solid states and during degradation. This application seeks to establish a coordinated Polymer Spectroscopy Network using new forms of infrared and NMR spectroscopy to probe samples (usually of an non-planar geometry) in a range of configurations. These will be used simultaneously with other techniques such as rheology or thermogravimetry, and will produce capabilities unique in Australia.Read moreRead less
The development of super-toughened epoxies using a novel nanomaterial. Epoxy resins are widely used as structural adhesives and coatings in engineering structures. This project will address the problem of the intrinsic brittleness of epoxy by making it significantly tougher with superior performance and cost-effectiveness. Our technology for producing super-toughened epoxy will lead to a wide range of applications for new and existing products in the construction, automotive, aerospace, adhesive ....The development of super-toughened epoxies using a novel nanomaterial. Epoxy resins are widely used as structural adhesives and coatings in engineering structures. This project will address the problem of the intrinsic brittleness of epoxy by making it significantly tougher with superior performance and cost-effectiveness. Our technology for producing super-toughened epoxy will lead to a wide range of applications for new and existing products in the construction, automotive, aerospace, adhesive and microelectronics industries.Read moreRead less