Novel injection moulded polymer substrates for solid phase applications. Solid phase organic reactions form the basis of many applications in drug design and development and medical applications. This project proposes the development of novel solid phase materials via control of novel insitu crosslinking and foaming processes and novel process molding control. This will enable more controlled large scale rapid production and detection of materials for biological and medical uses.
Fatigue thresholds, crack initiation and small crack growth phenomenon in uPVC, mPVC and Oriented PVC pipes. Unplasticised polyvinylchloride (uPVC) is currently used for water reticulation pipelines. These are subject to variable pressure which can lead to fatigue failures. Improved materials, modified PVC (mPVC) and oriented PVC (oPVC), are now entering this market. uPVC shows a fatigue threshold when prenotched samples are tested. The fatigue threshold is an important design concept since it r ....Fatigue thresholds, crack initiation and small crack growth phenomenon in uPVC, mPVC and Oriented PVC pipes. Unplasticised polyvinylchloride (uPVC) is currently used for water reticulation pipelines. These are subject to variable pressure which can lead to fatigue failures. Improved materials, modified PVC (mPVC) and oriented PVC (oPVC), are now entering this market. uPVC shows a fatigue threshold when prenotched samples are tested. The fatigue threshold is an important design concept since it represents the stress amplitude below which fatigue failures should not occur. Its existence in unnotched pipes and in the newer PVC materials is uncertain. This project will quantify fatigue thresholds and the mechanisms involved in crack initiation in uPVC , mPVC and oPVC.Read moreRead less
Self Assembling Polymers for Novel Packaging Products. Have you had wet paper bags rip or stacks of boxes collapse during shipping? Novel polymer strength agents will be combined with nanoparticles to develop very strong paper packaging meeting Australia's needs. We will produce very strong paper packaging resisting frequent moisture changes while remaining fully recyclable. These strength agents will be produced and used in Australia to manufacture the fibre packaging needed to ship our manufac ....Self Assembling Polymers for Novel Packaging Products. Have you had wet paper bags rip or stacks of boxes collapse during shipping? Novel polymer strength agents will be combined with nanoparticles to develop very strong paper packaging meeting Australia's needs. We will produce very strong paper packaging resisting frequent moisture changes while remaining fully recyclable. These strength agents will be produced and used in Australia to manufacture the fibre packaging needed to ship our manufactured and agriculture goods within Australia and for export. The Paper industry is the largest manufacturing industry in rural Australia with sales of $4 billion and 5,900 direct and 85,000 indirect jobs.Read moreRead less
Optimising paint adhesion to polymers. The Australian automotive export market (vehicles, parts, engines) is worth approximately $4,500 million p.a. and is a major employer in many areas. A reliable, cheap and efficient method for preparing polymer surfaces for painting will significantly benefit that market. The ability to manufacture quality, cheaper, lightweight parts improves the competitiveness of the local automotive industry. More importantly, a technology for production of cheap, high qu ....Optimising paint adhesion to polymers. The Australian automotive export market (vehicles, parts, engines) is worth approximately $4,500 million p.a. and is a major employer in many areas. A reliable, cheap and efficient method for preparing polymer surfaces for painting will significantly benefit that market. The ability to manufacture quality, cheaper, lightweight parts improves the competitiveness of the local automotive industry. More importantly, a technology for production of cheap, high quality painted polymer surfaces vastly improves the competitiveness of local component manufacturers who supply to international vehicle manufacturers. This project falls under the National Research Priority Area 'Frontier Technologies for Building and Transforming Australian Industries'.Read moreRead less
High performance thermoplastic starch polymer films for controlled barrier and delivery. This project will deliver state of the art developments in high performance sustainable plastics. Specifically the project will develop new biopolymers for high-performance applications, such as smart packaging, biomedical materials and drug delivery systems.
Development of PVC-Based Polymer Nanocomposites. The aim of the project is to develop a PVC polymer nanocomposite material to be used in water pipelines. It has been found that the inclusion of a nanoparticle phase, in this case calcium carbonate, leads to increases in strength, stiffness, toughness and abrasion resistance. This proposed project will develop and assess an optimum material in addition to investigating the mechanisms of deformation.
Condition monitoring and process control of injection molding. Injection molding has been widely used in automotive industry and improvement of the productivity and quality of the products is very important for the injection molding production to be internationally competitive. The aim of this project is to develop a condition monitoring and process control system to monitor the key parameters of the injection molding processes, to optimise the design and process conditions, and consequently, to ....Condition monitoring and process control of injection molding. Injection molding has been widely used in automotive industry and improvement of the productivity and quality of the products is very important for the injection molding production to be internationally competitive. The aim of this project is to develop a condition monitoring and process control system to monitor the key parameters of the injection molding processes, to optimise the design and process conditions, and consequently, to more actively control the processes. This will lead to an more reliable process, improved productivity and production of higher quality of moldings.Read moreRead less
Bioactive Polymers for Wound Healing Applications. VitroGroR is a growth factor complex which enhances cell growth and migration, and hence has great potential for treating wounds. Tissue Therapies, which holds the rights to commercialization of VitroGroR, is seeking to develop methods of delivering VitroGroR in its active form to the wound environment. Two solutions to this problem will be developed in this project; a bioactive bandage containing a novel combination of microspheres and a hydrog ....Bioactive Polymers for Wound Healing Applications. VitroGroR is a growth factor complex which enhances cell growth and migration, and hence has great potential for treating wounds. Tissue Therapies, which holds the rights to commercialization of VitroGroR, is seeking to develop methods of delivering VitroGroR in its active form to the wound environment. Two solutions to this problem will be developed in this project; a bioactive bandage containing a novel combination of microspheres and a hydrogel matrix, and secondly an in-situ polymerisable matrix for treatment of deep wounds. The growth factor complex will be protected from aggressive proteases through encapsulation within microspheres, and the use of MMP-inhibiting comonomers.Read moreRead less
Tailored Biodegradable Polymers for Injection Moulding Applications. This project aims to engineer and scale up production of biodegradable injection molded products with tailored properties, processing and biodegradation. Specifically we will focus on novel materials and processing technologies in tandem with biodegradation understandings to expand the utilization of starch-based polymers. We will then combine fundamental rheological and polymer processing skills with and product development ex ....Tailored Biodegradable Polymers for Injection Moulding Applications. This project aims to engineer and scale up production of biodegradable injection molded products with tailored properties, processing and biodegradation. Specifically we will focus on novel materials and processing technologies in tandem with biodegradation understandings to expand the utilization of starch-based polymers. We will then combine fundamental rheological and polymer processing skills with and product development experience from both universities and the industrial partner (Plantic Technologies) to scale up processing and develop successful biodegradable products. This project will also enable an Australian owned start-up company with a broad shareholder base to generate significant export income through key commercialization.Read moreRead less
Self-powered active noise control via a nanofibre acoustoelectric converter. This project aims to investigate a new, active noise control system that can eliminate low frequency noise without the use of external electricity. This project will generate new knowledge about how to realise self-powering on active noise controllers using piezoelectric nanofibres as sound detector and power generator. Expected outcomes include an effective method to produce this novel noise controller and a systemic u ....Self-powered active noise control via a nanofibre acoustoelectric converter. This project aims to investigate a new, active noise control system that can eliminate low frequency noise without the use of external electricity. This project will generate new knowledge about how to realise self-powering on active noise controllers using piezoelectric nanofibres as sound detector and power generator. Expected outcomes include an effective method to produce this novel noise controller and a systemic understanding about materials, devices and performance. This will significantly benefit development of advanced noise controlling technology and products, benefiting industry and the environment.Read moreRead less