Development of PVC-Based Polymer Nanocomposites. The aim of the project is to develop a PVC polymer nanocomposite material to be used in water pipelines. It has been found that the inclusion of a nanoparticle phase, in this case calcium carbonate, leads to increases in strength, stiffness, toughness and abrasion resistance. This proposed project will develop and assess an optimum material in addition to investigating the mechanisms of deformation.
New Types of Biomimetic Nanostructured Adhesives. Adhesives are one of the main ways in which we join materials, and have many advantages over other methods of joining. In this work we will make a new class of adhesive using nanotechnology that attempts to copy the very fine-haired feet of animals such as geckos who can stick to almost any surface, under most conditions. We will make these adhesives over large surface areas, and thus they will have commercial possibilities in a range of high tec ....New Types of Biomimetic Nanostructured Adhesives. Adhesives are one of the main ways in which we join materials, and have many advantages over other methods of joining. In this work we will make a new class of adhesive using nanotechnology that attempts to copy the very fine-haired feet of animals such as geckos who can stick to almost any surface, under most conditions. We will make these adhesives over large surface areas, and thus they will have commercial possibilities in a range of high technology industries, as well as in harsh environments. Because we will be able to manipulate the structure and observe property changes, it should also give us a greater insight into the adhesion mechanisms used by many small animals and bugs.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0560981
Funder
Australian Research Council
Funding Amount
$160,940.00
Summary
Confronting the Challenges in Modern Spectroscopy of Polymers. Polymers and nanocomposites are increasingly being used in new, high value applications as diverse as medicine, structural engineering, optics and electronics. In order to control and understand polymer performance, a detailed knowledge of the chemical structure at all stages in their lifecycle is required - in the liquid, rubber and solid states and during degradation. This application seeks to establish a coordinated Polymer Spectr ....Confronting the Challenges in Modern Spectroscopy of Polymers. Polymers and nanocomposites are increasingly being used in new, high value applications as diverse as medicine, structural engineering, optics and electronics. In order to control and understand polymer performance, a detailed knowledge of the chemical structure at all stages in their lifecycle is required - in the liquid, rubber and solid states and during degradation. This application seeks to establish a coordinated Polymer Spectroscopy Network using new forms of infrared and NMR spectroscopy to probe samples (usually of an non-planar geometry) in a range of configurations. These will be used simultaneously with other techniques such as rheology or thermogravimetry, and will produce capabilities unique in Australia.Read moreRead less
The development of super-toughened epoxies using a novel nanomaterial. Epoxy resins are widely used as structural adhesives and coatings in engineering structures. This project will address the problem of the intrinsic brittleness of epoxy by making it significantly tougher with superior performance and cost-effectiveness. Our technology for producing super-toughened epoxy will lead to a wide range of applications for new and existing products in the construction, automotive, aerospace, adhesive ....The development of super-toughened epoxies using a novel nanomaterial. Epoxy resins are widely used as structural adhesives and coatings in engineering structures. This project will address the problem of the intrinsic brittleness of epoxy by making it significantly tougher with superior performance and cost-effectiveness. Our technology for producing super-toughened epoxy will lead to a wide range of applications for new and existing products in the construction, automotive, aerospace, adhesive and microelectronics industries.Read moreRead less
Single molecule actuators. The study of actuation processes in single molecules will lead to the development of improved advanced materials for Australian industry and, ultimately, to the more futuristic and exciting nanotechnologies. The research will improve our understanding of how polymer artificial muscles function, so that these materials can be further developed to meet the demand from industry. Applications include biomedical devices, robotic applicators and various machine parts. In ....Single molecule actuators. The study of actuation processes in single molecules will lead to the development of improved advanced materials for Australian industry and, ultimately, to the more futuristic and exciting nanotechnologies. The research will improve our understanding of how polymer artificial muscles function, so that these materials can be further developed to meet the demand from industry. Applications include biomedical devices, robotic applicators and various machine parts. In addition, the research will also contribute to one of the greatest promises of nanotechnology: the development of molecular machines. We will demonstrate the mechanical forces and movements possible from single molecules so that the design of useful nano-machines can begin.Read moreRead less
Meshless, numerical modelling for polymer processing. The new modelling technology will significantly improve Australian polymer producers' competitiveness and their ability to respond to international market forces. The technology will lead to new opportunities for Australian companies that develop simulation software. Our consumers will benefit from improvements in the design of polymer products. Our researchers in rheology and computational mechanics will gain further opportunities to extend ....Meshless, numerical modelling for polymer processing. The new modelling technology will significantly improve Australian polymer producers' competitiveness and their ability to respond to international market forces. The technology will lead to new opportunities for Australian companies that develop simulation software. Our consumers will benefit from improvements in the design of polymer products. Our researchers in rheology and computational mechanics will gain further opportunities to extend the advances this project will make.Read moreRead less
Nanostructure Design and Toughening Mechanisms of Novel Thermosets. The research will enable a new technology to manufacture a class of novel nanostructured thermosets that will impact many application areas in Australia, such as protective surface coatings, structural adhesives and composite matrix materials for aerospace and automotive, and microelectronic devices, etc. The intellectual properties and patents generated will contribute to the overall competitiveness and productivity of Australi ....Nanostructure Design and Toughening Mechanisms of Novel Thermosets. The research will enable a new technology to manufacture a class of novel nanostructured thermosets that will impact many application areas in Australia, such as protective surface coatings, structural adhesives and composite matrix materials for aerospace and automotive, and microelectronic devices, etc. The intellectual properties and patents generated will contribute to the overall competitiveness and productivity of Australia~{!/~}s R&D. They will also provide business opportunities to develop niche markets for these new and high-value added materials on a large scale in Australia so as to maximise return and create jobs. Read moreRead less
Cost effective high output polymer fibre optic lighting systems. A new flexible composite polymer can transport light over distances beyond 30 metres within diameters of 5mm to 25mm and still be intrinsically bright. The link between composition, transport efficiency and output will be established. Input studies will include tailored external optics and full integration of bright LED's inside the cable. Prototypes evaluated will include, lighting inside display refrigeration, "on person" safety ....Cost effective high output polymer fibre optic lighting systems. A new flexible composite polymer can transport light over distances beyond 30 metres within diameters of 5mm to 25mm and still be intrinsically bright. The link between composition, transport efficiency and output will be established. Input studies will include tailored external optics and full integration of bright LED's inside the cable. Prototypes evaluated will include, lighting inside display refrigeration, "on person" safety and fashion lighting (including novel jewellery), solar powered LED lighting for remote areas (including roadworks, stand alone signs, developing country and remote rural homes), daylight and lamps together in the one cable, and general lighting. Many of these will be developed by the industry collaborator.Read moreRead less
Nanofabrication of Organic (Plastic) Semiconductor and Superconductor Devices. Organic crystals and thin-films are the first known materials to display all four regimes of electrical conduction - insulator, semiconductor, metal and superconductor. Additional properties such as self-assembly, biocompatibility, molecular level control over properties and flexibility give them exceptional prospects for future industrial applications. We will fabricate organic transistors and conduct detailed invest ....Nanofabrication of Organic (Plastic) Semiconductor and Superconductor Devices. Organic crystals and thin-films are the first known materials to display all four regimes of electrical conduction - insulator, semiconductor, metal and superconductor. Additional properties such as self-assembly, biocompatibility, molecular level control over properties and flexibility give them exceptional prospects for future industrial applications. We will fabricate organic transistors and conduct detailed investigations of their electrical and magnetic properties to develop a fundamental understanding of these new materials. Most significantly, we will make the first use of an atomic force microscope-based oxidation lithography technique to fabricate nanoscale quantum devices that exploit the full range of conduction in a single material.Read moreRead less
Structure-Property Relationships of Polymers with Controlled Architecture. Mechanical properties of a polymer (e.g., how elastic it is and how it dissipates energy when compressed) govern how well it performs as an adhesive, or its behaviour when melted and shaped into a consumer item. This project aims to relate molecular architecture to mechanical properties, using new techniques which permit the creation of polymers wherein each architectural characteristic is separately controlled. This has ....Structure-Property Relationships of Polymers with Controlled Architecture. Mechanical properties of a polymer (e.g., how elastic it is and how it dissipates energy when compressed) govern how well it performs as an adhesive, or its behaviour when melted and shaped into a consumer item. This project aims to relate molecular architecture to mechanical properties, using new techniques which permit the creation of polymers wherein each architectural characteristic is separately controlled. This has the potential to develop fundamental understanding for structure-property relations for the type of branched polymers that are in common use in industry and for which adequate models do not currently exist.Read moreRead less