Linkage Infrastructure, Equipment And Facilities - Grant ID: LE100100121
Funder
Australian Research Council
Funding Amount
$1,000,000.00
Summary
An analytical transmission electron microscope for the investigation of functional materials, earth processes and novel condensed matter. Sustainablity depends on the delivery of clean energy, pristine water and air, and the manufacture of consumer products with small environmental footprints. Modelling long-term impacts requires an understanding of the hydro-geological cycles. The technologies are well known—efficient electronics, fuel cells, lightweight composites, and so on—but delivery is ....An analytical transmission electron microscope for the investigation of functional materials, earth processes and novel condensed matter. Sustainablity depends on the delivery of clean energy, pristine water and air, and the manufacture of consumer products with small environmental footprints. Modelling long-term impacts requires an understanding of the hydro-geological cycles. The technologies are well known—efficient electronics, fuel cells, lightweight composites, and so on—but delivery is not straightforward. It is clear, however, that novel materials manipulated at fine scales will be key. Transmission electron microscopy (TEM) guides the development of sustainable technologies. The new TEM facility at ANU will accelerate current studies, by enhancing the materials research portfolio, and extending national and international collaborations in materials, geological and earth sciences.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE200100033
Funder
Australian Research Council
Funding Amount
$1,200,000.00
Summary
In situ Environmental Electron Microscope Facility. This project aims to establish an In situ Environmental Electron Microscope Facility to characterise real-time and dynamic changes in nanomaterials at the atomic scale. We will combine a cutting-edge 'in situ' gas/heating/electrical bias holder with new camera and analysis technology on a transmission electron microscope. This facility will be a sophisticated suite of equipment that will innovate and transform microscopy in Australia to image s ....In situ Environmental Electron Microscope Facility. This project aims to establish an In situ Environmental Electron Microscope Facility to characterise real-time and dynamic changes in nanomaterials at the atomic scale. We will combine a cutting-edge 'in situ' gas/heating/electrical bias holder with new camera and analysis technology on a transmission electron microscope. This facility will be a sophisticated suite of equipment that will innovate and transform microscopy in Australia to image structural and compositional changes of materials under stimuli at a speed and resolution previously unachievable. This project will drive pioneering research in the fields of Materials Science, Chemistry and Catalysis to solve problems in advanced manufacturing, energy, technology and the environment.Read moreRead less
Nanoscale control of energy and matter for future energy-efficient technologies. Unprecedented control of energy and matter in nanoscale fabrication will be achieved using non-equilibrium self-organised plasma-solid systems. The outcomes will lead to energy-efficient, environment- and human-health-friendly production of nanomaterials for future energy, health, information, food, water, environmental and security technologies.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE210100156
Funder
Australian Research Council
Funding Amount
$289,500.00
Summary
3D Two-Photon Nanoprinter for Advanced Multi-Functional Materials & Devices. The Nanoscribe Photonic Professional GT2 Two-Photon 3D Printer enables tailoring materials’ architecture at nanoscale. This results in unique optical, mechanical, electrical, chemical, biochemical, and acoustic properties enabling a wealth of cutting-edge research activities in variety of fields including mechanical/optical/electrical metamaterials, bioinspired hard/soft materials, biomaterials (e.g., structured cell-ti ....3D Two-Photon Nanoprinter for Advanced Multi-Functional Materials & Devices. The Nanoscribe Photonic Professional GT2 Two-Photon 3D Printer enables tailoring materials’ architecture at nanoscale. This results in unique optical, mechanical, electrical, chemical, biochemical, and acoustic properties enabling a wealth of cutting-edge research activities in variety of fields including mechanical/optical/electrical metamaterials, bioinspired hard/soft materials, biomaterials (e.g., structured cell-tissue interfaces), biomedical devices (implantable devices and drug-delivery systems), nanofluidics, and photonic crystals. In each of these fields, we will use GT2 to print variety of polymers, hydrogels, metals and ceramics, for example by printing polymer-derived nanoceramics that will be simultaneously strong and tough.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE200100197
Funder
Australian Research Council
Funding Amount
$1,102,947.00
Summary
Cryogenic Scanning Microwave Measurement Facility for Quantum Materials. This proposal addresses a major experimental capacity gap in Australian infrastructure for research and development of novel electronic materials and nanoscale quantum devices for future technologies. It will establish Australia's first non-contact, non-destructive, cryogenic scanning microwave microscopy facility for advanced materials characterization enabling new studies of these materials in the 2 to 300 Kelvin temperat ....Cryogenic Scanning Microwave Measurement Facility for Quantum Materials. This proposal addresses a major experimental capacity gap in Australian infrastructure for research and development of novel electronic materials and nanoscale quantum devices for future technologies. It will establish Australia's first non-contact, non-destructive, cryogenic scanning microwave microscopy facility for advanced materials characterization enabling new studies of these materials in the 2 to 300 Kelvin temperature range. The facility will provide crucial new information for the development of future quantum materials, enhancing our international competitiveness in the development of next-generation electronic materials and device technologies.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE210100086
Funder
Australian Research Council
Funding Amount
$489,250.00
Summary
A platform for probing nanoscale magnetic states under multiple actuations. The proposed facility offers unique capabilities to investigate the interactions of spin with charge and lattice under external stimuli of light illumination, mechanical stress and voltage bias at various temperatures in a wide range of functional materials. Precise laser magnetometry and video-rate Kerr microscopy are integrated in a single magneto-optic Kerr effect (MOKE) system. This platform also aims to provide opti ....A platform for probing nanoscale magnetic states under multiple actuations. The proposed facility offers unique capabilities to investigate the interactions of spin with charge and lattice under external stimuli of light illumination, mechanical stress and voltage bias at various temperatures in a wide range of functional materials. Precise laser magnetometry and video-rate Kerr microscopy are integrated in a single magneto-optic Kerr effect (MOKE) system. This platform also aims to provide optical magnetic circular dichroism (OMCD) to assess electronic structures of semiconductors and biomedical materials. It will facilitate multidisciplinary research collaborations between academics and industries to advance next-generation spintronics, optoelectronics, energy conversion and storage, and biomedical technologies.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE170100140
Funder
Australian Research Council
Funding Amount
$1,050,000.00
Summary
A multiple ion beam facility for microscopy and nanofabrication. This project aims to establish a powerful multiple ion beam system for nanoscience research. The demand for customised therapies, secure communication and efficient energy harvesting prompts the development of nanoscale devices that can interface and interact with the environment: nanotechnology systems with fully functional sensors, detectors, energy and data processing modules. This project would increase the ability to observe a ....A multiple ion beam facility for microscopy and nanofabrication. This project aims to establish a powerful multiple ion beam system for nanoscience research. The demand for customised therapies, secure communication and efficient energy harvesting prompts the development of nanoscale devices that can interface and interact with the environment: nanotechnology systems with fully functional sensors, detectors, energy and data processing modules. This project would increase the ability to observe and manipulate the structure of materials at the nanometre length-scale. This project is expected to boost Australia’s research capacity in nanoscience and develop materials for nanoelectronics, energy and the environment, and structural materials. These outcomes will benefit Australia’s capacity to develop advanced manufacturing industries.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE130101264
Funder
Australian Research Council
Funding Amount
$375,000.00
Summary
Carbon nanotube-based supercapacitors: breaking the energy density limit. Novel electrodes will be nano-architectured by using ultralong single-walled carbon nanotube arrays and transition metal oxides to produce next-generation supercapacitors. The outcomes will lead to unprecedented energy densities in energy storage devices for sustainable future energy solutions.
New approach to control grain boundary behaviour in superconducting thin films. This project aims at finding a new approach to overcome the cornerstone problem of high temperature superconducting films through new design, magnetic interactions, and real-time magnetic flux visualisation at the quantum level. The expected ultimate achievement would be to develop new technologies, delivering the best performance of the films.