Quantum dynamics of solid-state qubits. The primary aim of this project is to carry out a critical assessment of several solid-state qubit systems and quantum logic gate operations through detailed theoretical calculations. This project will address important issues such as precise control of electron flux and spin interactions, optimal operating conditions, errors due to imperfection in the system and possible mechanisms for error elimination, as well as reliable measurements of the output qubi ....Quantum dynamics of solid-state qubits. The primary aim of this project is to carry out a critical assessment of several solid-state qubit systems and quantum logic gate operations through detailed theoretical calculations. This project will address important issues such as precise control of electron flux and spin interactions, optimal operating conditions, errors due to imperfection in the system and possible mechanisms for error elimination, as well as reliable measurements of the output qubit register. In addition, qubit systems have shown themselves to be tiny laboratories in which fundamental concepts in quantum mechanics can be tested and a new regime of physics can be learnt.Read moreRead less
Investigation of spin excitations in ferromagnetic submicro- and nanostructures. The project will last 12 months and will be devoted to investigation of spin-wave dynamics in thin ferromagnetic-film sub-micro- and nano-structures for possible applications to microwave\millimetre wave electronic devices and to novel magnetic memory devices. Excitation of spin-wave modes in confined in magnetic nano- and submicro-objects (from the super-paramagnetic size limit up to 700 nm) will be theoreticall ....Investigation of spin excitations in ferromagnetic submicro- and nanostructures. The project will last 12 months and will be devoted to investigation of spin-wave dynamics in thin ferromagnetic-film sub-micro- and nano-structures for possible applications to microwave\millimetre wave electronic devices and to novel magnetic memory devices. Excitation of spin-wave modes in confined in magnetic nano- and submicro-objects (from the super-paramagnetic size limit up to 700 nm) will be theoretically studied. In co-operation with other research groups the obtained theoretical results will be experimentally verified. New information on microwave properties of the structures will be obtained. Possibility of application of the magnetic structures to construct new microwave devices will be considered.Read moreRead less
New generation of hyperspectral infrared photon detectors. Although highly desirable for many applications, tuneable, on chip, infrared photon detectors are not yet available. The approach described in this application aims to develop a technology for high performance, on chip, infrared photon detectors that can be tuned over a wide wavelength range. By applying a novel in-house developed semiconductor process and a multi-disciplinary approach, this project aims to develop such devices by combin ....New generation of hyperspectral infrared photon detectors. Although highly desirable for many applications, tuneable, on chip, infrared photon detectors are not yet available. The approach described in this application aims to develop a technology for high performance, on chip, infrared photon detectors that can be tuned over a wide wavelength range. By applying a novel in-house developed semiconductor process and a multi-disciplinary approach, this project aims to develop such devices by combining, for the first time, micromachined tuneable optical microcavities with high performance HgCdTe-based infrared detectors.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0667994
Funder
Australian Research Council
Funding Amount
$1,000,000.00
Summary
National Nanolithography Facility. Nanotechnology is expected to have a major impact on quality of life and global economy. It is predicted to generate revenues as big as the ICT sector in 20 years time. The National Nanolithography Facility will enhance the Australian capability in the field of nanoscale science and technology. This will enable Australian researchers to achieve major impacts in many areas of nanotechnology with a strong potential impact on industry sectors such as computers, ....National Nanolithography Facility. Nanotechnology is expected to have a major impact on quality of life and global economy. It is predicted to generate revenues as big as the ICT sector in 20 years time. The National Nanolithography Facility will enhance the Australian capability in the field of nanoscale science and technology. This will enable Australian researchers to achieve major impacts in many areas of nanotechnology with a strong potential impact on industry sectors such as computers, communications, defence, health, bio-security. This facility has the potential for developing new technologies of fundamental as well as applied interest.Read moreRead less
Investigation of 1/f noise mechanisms in HgCdTe heterostructure IR photodiodes. Since the performance of any photon detector is defined by its signal to noise ratio, the reduction of noise generating mechanisms is equally important to improvement of the signal. In this project we propose to carry out, for the first time, a comprehensive analysis of noise generating mechanisms in HgCdTe detectors using recently developed, two-dimensional analysis procedure. The main objective of this project is t ....Investigation of 1/f noise mechanisms in HgCdTe heterostructure IR photodiodes. Since the performance of any photon detector is defined by its signal to noise ratio, the reduction of noise generating mechanisms is equally important to improvement of the signal. In this project we propose to carry out, for the first time, a comprehensive analysis of noise generating mechanisms in HgCdTe detectors using recently developed, two-dimensional analysis procedure. The main objective of this project is to prove that 1/f noise in HgCdTe photodetectors is caused by dark current fluctuations in the high electric field regions of the detector structure. The primary outcome of this work will be the first comprehensive two-dimensional device model that can predict 1/f noise in a semiconductor device.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0775553
Funder
Australian Research Council
Funding Amount
$500,000.00
Summary
The Nanoscale Characterisation Centre WA Focussed Ion Beam Nanofabrication and Milling Facility. The advanced capabilities of the proposed nano-machining scanning electron microscope will facilitate research at the forefront of materials science and engineering. The proposed facility will play a key role in leading applied research across a wide range of areas including materials technology, nanochemistry, corrosion research, geology, sensor development, minerals processing and environmental re ....The Nanoscale Characterisation Centre WA Focussed Ion Beam Nanofabrication and Milling Facility. The advanced capabilities of the proposed nano-machining scanning electron microscope will facilitate research at the forefront of materials science and engineering. The proposed facility will play a key role in leading applied research across a wide range of areas including materials technology, nanochemistry, corrosion research, geology, sensor development, minerals processing and environmental research. The proposed facility to be used by scientific and industrial researchers will deliver applied interdisciplinary research of an international standard and allow Australian industries to remain internationally competitive.Read moreRead less
Infrared optoelectronic sensors based on p-type molecular beam epitaxy grown HgCdTe. The ability of infrared detectors to directly sense the thermal output of an object has applications in medicine, search and rescue, bushfire detection and in the defence and surveillance industries. The highest performing infrared detectors are photon detectors based molecular beam epitaxy (MBE) grown HgCdTe. The primary aims of this project relate to the fundamental understanding of p-type doping in MBE grown ....Infrared optoelectronic sensors based on p-type molecular beam epitaxy grown HgCdTe. The ability of infrared detectors to directly sense the thermal output of an object has applications in medicine, search and rescue, bushfire detection and in the defence and surveillance industries. The highest performing infrared detectors are photon detectors based molecular beam epitaxy (MBE) grown HgCdTe. The primary aims of this project relate to the fundamental understanding of p-type doping in MBE grown HgCdTe, a current and major difficulty in HgCdTe technology, and the use of such p-type MBE grown layers in conjunction with a newly developed plasma process based n-p junction formation technology to realise novel and innovative infrared detector structures. Such structures would have the ability to revolutionise the use of HgCdTe in infrared detectors and focal plane array applications.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0238960
Funder
Australian Research Council
Funding Amount
$940,000.00
Summary
High Performance Semiconductor Micromachining Facility. The purpose of this project is to make available to the Australian semiconductor research community a facility to undertake specialist deposition and etching tasks needed for fabrication of next generation solar cells, microelectronics, optronics, and micro-electromechanical systems. The facility will have the flexibility to allow independent control of major process parameters, allowing development of new fabrication technologies which wi ....High Performance Semiconductor Micromachining Facility. The purpose of this project is to make available to the Australian semiconductor research community a facility to undertake specialist deposition and etching tasks needed for fabrication of next generation solar cells, microelectronics, optronics, and micro-electromechanical systems. The facility will have the flexibility to allow independent control of major process parameters, allowing development of new fabrication technologies which will be generic to a wide range of semiconductor materials. In particular, the facility will be unique in its ability to perform processes at low temperatures, and under conditions that allow optimisation of the deposition and etching processes, without compromising the performance of delicate devices or exceeding the maximum process temperature limitations found in many mainstream semiconductor materials technologies.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0882816
Funder
Australian Research Council
Funding Amount
$500,000.00
Summary
Micro and Nanostructure Optical Characterisation Facility. This facility will allow the carrying out of research in the area of micro and nanostructures which are of interest to Australian industry. Access to state of the art facilities will provide opportunities to train PhD students and post-doctoral fellows in the advanced science and technology fields of national and industrial interest. New technologies developed in this area have the potential to improve the quality of life, e.g. National ....Micro and Nanostructure Optical Characterisation Facility. This facility will allow the carrying out of research in the area of micro and nanostructures which are of interest to Australian industry. Access to state of the art facilities will provide opportunities to train PhD students and post-doctoral fellows in the advanced science and technology fields of national and industrial interest. New technologies developed in this area have the potential to improve the quality of life, e.g. National security, communications, health care.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0775614
Funder
Australian Research Council
Funding Amount
$150,000.00
Summary
National Electromagnetic Characterization Facility for Advanced Electronic and Biomaterials. The proposed Material Characterisation Facility using non-destructive methods will be unique to Australia. Precise characterisation of advanced materials such as dielectrics and superconductors using the facility will progress emerging technologies within the electronic and communication research area. The inclusion of a microwave scanning test bed within the laboratory will allow engineers, scientists, ....National Electromagnetic Characterization Facility for Advanced Electronic and Biomaterials. The proposed Material Characterisation Facility using non-destructive methods will be unique to Australia. Precise characterisation of advanced materials such as dielectrics and superconductors using the facility will progress emerging technologies within the electronic and communication research area. The inclusion of a microwave scanning test bed within the laboratory will allow engineers, scientists, biologists and medical scientists to safely detect the intrinsic electromagnetic properties of electronic materials and tumours in biological tissues or poor quality agricultural produce. This comprehensive material characterisation facility will therefore benefit the peoples of Australasia in many significant and diverse ways.Read moreRead less