Reducing gas and ash corrosion in advanced power generation. Advanced power generation using new coal combustion technologies increases energy efficiency and makes carbon dioxide capture possible, but increases the corrosion problems. This project aims to determine the corrosion behaviour of chromia-scale forming iron- and nickel-base alloys in the presence of deposits (coal ashes and salts) under carbon dioxide rich gas atmospheres. The increased understanding of alloy behaviour in hot corrosiv ....Reducing gas and ash corrosion in advanced power generation. Advanced power generation using new coal combustion technologies increases energy efficiency and makes carbon dioxide capture possible, but increases the corrosion problems. This project aims to determine the corrosion behaviour of chromia-scale forming iron- and nickel-base alloys in the presence of deposits (coal ashes and salts) under carbon dioxide rich gas atmospheres. The increased understanding of alloy behaviour in hot corrosive ashes and gases, will permit more effective materials design and selection leading to more efficient and economic technologies for reliable and low cost carbon capture in energy production, waste-energy conversion and related industries.Read moreRead less
High temperature corrosion induced by multiple secondary oxidants . Heat resisting chromia-forming alloys passivate successfully in clean, dry air at temperatures up to about 950°C. However, this performance is degraded by secondary oxidants (carbon, sulphur, chlorine, water vapour), leading to corrosion failure in important industries. The project aims to investigate the effect of these secondary oxidants on corrosion behaviour of chromia-forming alloys, to identify interactions between multipl ....High temperature corrosion induced by multiple secondary oxidants . Heat resisting chromia-forming alloys passivate successfully in clean, dry air at temperatures up to about 950°C. However, this performance is degraded by secondary oxidants (carbon, sulphur, chlorine, water vapour), leading to corrosion failure in important industries. The project aims to investigate the effect of these secondary oxidants on corrosion behaviour of chromia-forming alloys, to identify interactions between multiple oxidants within the scale, to establish the mechanisms of oxide scale penetration by foreign species, and to evaluate scales on different alloy types. The results will provide a basis for improved design/selection of heat resisting chromia-forming alloys, key to power generation industries.Read moreRead less
Two-dimensional plasmonic heterogeneous nanostructures for photocatalysis. This project aims to design and explore two-dimensional heterogeneous photocatalysts that can convert solar energy into usable chemical energy. This project will investigate the correlation between surface plasmonic resonance and photocatalytic activities on the atomic level. Heterogeneous engineering and in-situ investigation of atomic-level photocatalytic dynamics is expected to yield several new full-solar-spectrum pho ....Two-dimensional plasmonic heterogeneous nanostructures for photocatalysis. This project aims to design and explore two-dimensional heterogeneous photocatalysts that can convert solar energy into usable chemical energy. This project will investigate the correlation between surface plasmonic resonance and photocatalytic activities on the atomic level. Heterogeneous engineering and in-situ investigation of atomic-level photocatalytic dynamics is expected to yield several new full-solar-spectrum photocatalysts. The project is expected to contribute to the understanding of the processes and mechanisms underlying photocatalysis, and lead to useable, stable and durable photocatalytics. The outcomes will enable efficient, cost-effective and reliable production of clean energy in a low-emission way.Read moreRead less
Heat-resisting iron-nickel base alloys in challenging new applications: oxygen permeabilities and resistance to internal oxidation. There is a pressing need to develop heat resisting alloys which can function adequately in higher operating temperatures and gas mixtures rich in carbon and hydrogen to be handled in advanced technologies for power generation. The expected outcomes of this project will provide the basis for design/selection of these more corrosion-resistant alloys.
Wearable thermoelectric textiles for portable microelectronics. Wearable thermoelectrics enable the power generation from the temperature difference between human body and ambient temperature by using thermoelectric effect. This project aims to design eco-friendly wearable thermoelectric textiles to realize high-efficiency solid-state power generation and meet individual needs with human comfort and health. The target is to achieve a power density in the as-designed thermoelectric textiles by th ....Wearable thermoelectric textiles for portable microelectronics. Wearable thermoelectrics enable the power generation from the temperature difference between human body and ambient temperature by using thermoelectric effect. This project aims to design eco-friendly wearable thermoelectric textiles to realize high-efficiency solid-state power generation and meet individual needs with human comfort and health. The target is to achieve a power density in the as-designed thermoelectric textiles by the optimization of materials and device design. The outcome will open up a new platform for the green and sustainable charge for portable microelectronics, which will lead to an innovative technology for energy management, which will place Australia at the forefront of wearable electronics and textile industry.Read moreRead less
Hybrid photocatalytic nanomaterials for water purification. This project aims to synthesise and characterise a range of porous photocatalytic materials (materials that absorb light to catalyse a reaction), and to establish high-throughput processes to simultaneously test the effectiveness of multiple photocatalytic materials. This interdisciplinary project expects to develop two new techniques that will lead to faster materials optimisation of materials that breakdown organic pollutants in water ....Hybrid photocatalytic nanomaterials for water purification. This project aims to synthesise and characterise a range of porous photocatalytic materials (materials that absorb light to catalyse a reaction), and to establish high-throughput processes to simultaneously test the effectiveness of multiple photocatalytic materials. This interdisciplinary project expects to develop two new techniques that will lead to faster materials optimisation of materials that breakdown organic pollutants in water under light irradiation. The intended outcomes include the production of industrially relevant photocatalysts and building capability in Australia to decrease photocatalytic testing time and cost. This should provide significant benefits to industry and the environment, and have an impact on human health.Read moreRead less
Powering Next Generation Wearable Electronics: Moisture Electric Generator . This project aims to develop next generation energy harvesting device which can directly generate electricity from the moisture in the air for self-powered, wearable electronics. The goal will be achieved by developing a new class of carbon based nanomaterials and large scale printing technology, through optimizing the materials defects, printing process and electrode configuration. The expected outcomes will be new el ....Powering Next Generation Wearable Electronics: Moisture Electric Generator . This project aims to develop next generation energy harvesting device which can directly generate electricity from the moisture in the air for self-powered, wearable electronics. The goal will be achieved by developing a new class of carbon based nanomaterials and large scale printing technology, through optimizing the materials defects, printing process and electrode configuration. The expected outcomes will be new electronic materials for a wide range of end uses in wearable electronics, significant advances in self-powered, environmentally friendly devices, and commercialisation of the technology to Australian industries.Read moreRead less
Rechargeable lithium carbon dioxide battery - catalyst design to prototype . This project aims to develop a new concept of rechargeable lithium carbon dioxide batteries and scaled-up prototypes. Such a battery will be first of its kind to show high power comparable to gasoline and superior rechargeability over existing gas-involved batteries, ensuring realistic use for industrial purposes. Expected outcomes include 2-dimensional catalysts made from earth-abundant elements lowering large-scale pr ....Rechargeable lithium carbon dioxide battery - catalyst design to prototype . This project aims to develop a new concept of rechargeable lithium carbon dioxide batteries and scaled-up prototypes. Such a battery will be first of its kind to show high power comparable to gasoline and superior rechargeability over existing gas-involved batteries, ensuring realistic use for industrial purposes. Expected outcomes include 2-dimensional catalysts made from earth-abundant elements lowering large-scale production cost, a novel but reliable working principle based on reversible carbon dioxide/oxalate conversion, and prototypes featuring high specific capacity, large energy density and excellent durability. Via industrial pilot trials, commercial benefits will be fast tracked for energy security and carbon dioxide utilisation.Read moreRead less
New Electron Field Emission Films Based on Aligned Carbon Nanotube Guests in Liquid Crystalline Polymer Hosts. This project seeks to develop a new class of electron field emitting nanocomposite consisting of nanotubes in liquid crystalline polymers. Electron emitting materials are in much demand in x-ray and microwave generation, computer displays and low-energy lighting. We utilise the ready alignability of liquid crystalline units in magnetic fields to cause realignment of incorporated carbon ....New Electron Field Emission Films Based on Aligned Carbon Nanotube Guests in Liquid Crystalline Polymer Hosts. This project seeks to develop a new class of electron field emitting nanocomposite consisting of nanotubes in liquid crystalline polymers. Electron emitting materials are in much demand in x-ray and microwave generation, computer displays and low-energy lighting. We utilise the ready alignability of liquid crystalline units in magnetic fields to cause realignment of incorporated carbon nanotubes, followed by polymer solidification to maintain orientation. It involves low temperature processing, contrasting very favourably with current problematic, high temperature processes. This allows materials to be cast on flexible polymer substrates, potentially enabling construction of cathode tubes to replace existing mercury-containing fluorescent lighting.Read moreRead less