Thin-walled Structures Subjected to Impact and Blast Loading. Terrorist attacks have cost Australians much human grief and billions of dollars. Containing the consequences of a blast or impact is crucial to survival and restricting damage to critical civilian/defence infrastructure. Thin-walled structures are used extensively in such infrastructure. There is a lack of knowledge about their behaviour when subjected to impulse and blast loads. The investigators will establish the most economical m ....Thin-walled Structures Subjected to Impact and Blast Loading. Terrorist attacks have cost Australians much human grief and billions of dollars. Containing the consequences of a blast or impact is crucial to survival and restricting damage to critical civilian/defence infrastructure. Thin-walled structures are used extensively in such infrastructure. There is a lack of knowledge about their behaviour when subjected to impulse and blast loads. The investigators will establish the most economical means of designing passive blast protection into thin-walled structures and hence, Australia's critical infrastructure. This knowledge will be transferred into design standards and Australia's limited defence resources.Read moreRead less
Investigation of Geopolymer based Concretes for the Construction of High Fire Risk Infrastructures. Geopolymer concretes are emerging new materials promising superior fire resistance and durability and potentially cheaper than the widely used high strength concretes, which also consume high levels of Portland cements. Production of 1 ton of Portland cement releases 1 ton of green house gases. Further, the 6.5 million tons/year of cement currently produced in Australia is insufficient to meet the ....Investigation of Geopolymer based Concretes for the Construction of High Fire Risk Infrastructures. Geopolymer concretes are emerging new materials promising superior fire resistance and durability and potentially cheaper than the widely used high strength concretes, which also consume high levels of Portland cements. Production of 1 ton of Portland cement releases 1 ton of green house gases. Further, the 6.5 million tons/year of cement currently produced in Australia is insufficient to meet the industry demand. This project investigates the use of fly ash to make geopolymer concrete, without using any Portland cement, to find usage for part of the 11 million tons/year of fly ash produced as a waste from coal power stations in Australia.Read moreRead less
Development of an Alkali Activated Slag based Construction Material for High Fire Risk Infrastructures. This project will develop an alkali-activated slag (AAS) based construction material for tunnel construction. In tunnels, conventional concretes are likely to 'spall' in a hydrocarbon fire accident, possibly resulting in a tunnel collapse. The project is set to develop a spalling-resistant AAS as an alternative to conventional Portland cement, which is responsible for 6.5 million tons of gre ....Development of an Alkali Activated Slag based Construction Material for High Fire Risk Infrastructures. This project will develop an alkali-activated slag (AAS) based construction material for tunnel construction. In tunnels, conventional concretes are likely to 'spall' in a hydrocarbon fire accident, possibly resulting in a tunnel collapse. The project is set to develop a spalling-resistant AAS as an alternative to conventional Portland cement, which is responsible for 6.5 million tons of greenhouse gas emissions in Australia per year, whereas AAS is based on slag, an industrial waste product. The project also seeks to provide better understanding of the spalling phenomenon so that the engineers can design fireproofing for conventional concrete tunnels with confidence.Read moreRead less
High Strength Steel Protection Bollards. Terrorist attacks cost Australians much human grief and millions of dollars. Prevention of an attack is paramount. Passive road bollards are commonly used to stop a vehicle approaching and/or entering security sensitive infrastructure. Thin-walled tubes are used to manufacture such bollards. However there is a lack of knowledge about their behaviour, and in particular high strength alloy steel bollards, when subjected to impact loads. The investigators wi ....High Strength Steel Protection Bollards. Terrorist attacks cost Australians much human grief and millions of dollars. Prevention of an attack is paramount. Passive road bollards are commonly used to stop a vehicle approaching and/or entering security sensitive infrastructure. Thin-walled tubes are used to manufacture such bollards. However there is a lack of knowledge about their behaviour, and in particular high strength alloy steel bollards, when subjected to impact loads. The investigators will apply their extensive knowledge in thin-walled tubular structures to establish the most economical means of designing high strength bollards. This knowledge will be transferred into design standards and Australia's limited defence resources.Read moreRead less
Special Research Initiatives - Grant ID: SR0567373
Funder
Australian Research Council
Funding Amount
$99,696.00
Summary
Collection, Sharing, Visualisation and Analysis of locally gathered information from geographically remote areas vulnerable to tidal waves. This project will set up a virtual organization for tsunami related data analysis using grid technology. Due to geologically remote areas/countries involved the sharing of seismic, tidal and other locally gathered tsunami related information is critical to issuing a warning. In collaboration with Australian and International partners, this project will explo ....Collection, Sharing, Visualisation and Analysis of locally gathered information from geographically remote areas vulnerable to tidal waves. This project will set up a virtual organization for tsunami related data analysis using grid technology. Due to geologically remote areas/countries involved the sharing of seismic, tidal and other locally gathered tsunami related information is critical to issuing a warning. In collaboration with Australian and International partners, this project will explore: new avenues of tsunami-related data collection, which are currently not available; new data fusion methods; data sharing strategies; visualisation and analysis methods; and develop sensing methods to gather data on animal behaviours often reported as a possible way of identifying similar disasters.Read moreRead less
Stabilization of railway subgrade by lime-flyash slurry injection. The rail network in Australia provides a major transport route for commuters as well as transportation of goods. The subgrade of railway track should provide adequate support for the overlying ballast and capping layers. Hence, a poor subgrade always results in track problems associated with uneven track, fouled ballast, and misalignment of the track. This project will investigate in detail the fundamental mechanisms and key para ....Stabilization of railway subgrade by lime-flyash slurry injection. The rail network in Australia provides a major transport route for commuters as well as transportation of goods. The subgrade of railway track should provide adequate support for the overlying ballast and capping layers. Hence, a poor subgrade always results in track problems associated with uneven track, fouled ballast, and misalignment of the track. This project will investigate in detail the fundamental mechanisms and key parameters involved in the improvement of subgrade soil by injecting lime-flyash slurry. This project will develop an improved design procedure for lime-flyash slurry injection in the field based on experimental and numerical modelling.Read moreRead less
Improvement of the performance of water-sensitive geomaterials using hydrophobic additives. Geo-structures such as road and railway bases suffer from water induced damage because they readily interact with the atmosphere and shallow water tables. Under traffic loading, damage to geo-structures occurs as cracking, rutting and roughness, when the strength and stiffness of the geomaterials are compromised by on-going moisture variations. Substantial cost savings to the community can be made if ef ....Improvement of the performance of water-sensitive geomaterials using hydrophobic additives. Geo-structures such as road and railway bases suffer from water induced damage because they readily interact with the atmosphere and shallow water tables. Under traffic loading, damage to geo-structures occurs as cracking, rutting and roughness, when the strength and stiffness of the geomaterials are compromised by on-going moisture variations. Substantial cost savings to the community can be made if effective methods can be found to minimise such damage. This project proposes to study a novel technique, in which blends of hydrophobic polymer additives are used to increase the stability of geomaterials subjected to varying moisture levels and traffic loading.Read moreRead less
Assimilation of architectural and services design in early design modelling. How can buildings in a climate as varied as Australia's balance the best environmental comfort standards for their human occupants, cost and at the same time meet the urgent imperative of reduced energy consumption and associated carbon emissions? This practice-based research will develop tools to support more informed decision making in the earliest stage of an integral approach to services in the design of buildings. ....Assimilation of architectural and services design in early design modelling. How can buildings in a climate as varied as Australia's balance the best environmental comfort standards for their human occupants, cost and at the same time meet the urgent imperative of reduced energy consumption and associated carbon emissions? This practice-based research will develop tools to support more informed decision making in the earliest stage of an integral approach to services in the design of buildings. It will provide knowledge about designing architecture that is more environmentally responsive, can provide comfortable air in more optimised ways, that consume less energy and do this through promoting smarter use of information in practice.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0228900
Funder
Australian Research Council
Funding Amount
$603,000.00
Summary
Testing facility for heavily loaded bridge and barrier systems. Government and industry are increasing truck masses from current single articulated 42.5 tonne trucks to 160 tonne multi-bogie trucks. This will provide Australia with over $1 billion of potential benefits and an efficient and competitive transport industry. To capture these benefits and further progress Australia's economy, considerable collaborative research on a number of fronts must be carried out investigating how bridges and b ....Testing facility for heavily loaded bridge and barrier systems. Government and industry are increasing truck masses from current single articulated 42.5 tonne trucks to 160 tonne multi-bogie trucks. This will provide Australia with over $1 billion of potential benefits and an efficient and competitive transport industry. To capture these benefits and further progress Australia's economy, considerable collaborative research on a number of fronts must be carried out investigating how bridges and barriers can perform safely when subjected to very heavy traffic and impact loads under laboratory and typical service conditions. This application seeks funds for establishing a unique hi-tech testing facility in Australia vital for advancing such infrastructure technology.Read moreRead less
The response of beams subjected to axial load and lateral soil movements. Beams (piles, soil nails, and pipelines) are not only subjected to axial (vertical, axial and longitudinal)loading, but often withstand simultaneous lateral loading, due to either explicit structural loads, or due to loads induced by movement of the soils in which they are founded. Bridge piles adjacent to an approach embankment are one example. This project will provide experimental evidence to assist with the estimation ....The response of beams subjected to axial load and lateral soil movements. Beams (piles, soil nails, and pipelines) are not only subjected to axial (vertical, axial and longitudinal)loading, but often withstand simultaneous lateral loading, due to either explicit structural loads, or due to loads induced by movement of the soils in which they are founded. Bridge piles adjacent to an approach embankment are one example. This project will provide experimental evidence to assist with the estimation of capacity, axial and shear resistance, the validation of unified solutions for beams subjected to simultaneous lateral soil movements and axial loads. Such experimental evidence and analytical solutions are not currently available. The evidence will also assist with solving a contradictory, existing design principle, which will lead to an economic and efficient design approach.Read moreRead less