Spray-on Hydrogenated Films for Solar Cells. A successful project will contribute to a reduction in the cost of photovoltaic solar energy. This goal might be reached directly, via the development of spray-on hydrogenated films, or indirectly, through an improved knowledge of hydrogen passivation. Either way, the project will provide Australian Partner Investigator, Spark Solar, with a manufacturing edge over its global competitors. In so doing, it will support the burgeoning photovoltaic industr ....Spray-on Hydrogenated Films for Solar Cells. A successful project will contribute to a reduction in the cost of photovoltaic solar energy. This goal might be reached directly, via the development of spray-on hydrogenated films, or indirectly, through an improved knowledge of hydrogen passivation. Either way, the project will provide Australian Partner Investigator, Spark Solar, with a manufacturing edge over its global competitors. In so doing, it will support the burgeoning photovoltaic industry in Australia, providing jobs in manufacturing and research, and increasing the viability of photovoltaic energy as an alternative to fossil fuels. The project will also help keep Australia at the forefront of advances in photovoltaics and semiconductors.Read moreRead less
Overcoming performance limitations in multicrystalline silicon solar cells. This project aims to address the major impediments to improved efficiency of multicrystalline silicon solar cells, the most prevalent in industry today. Three key areas have been identified: understanding the fundamental source of carrier recombination in this material, the application of plasma silicon nitride to reducing this recombination, and developing a suitable technique for texturing the front surface of the cell ....Overcoming performance limitations in multicrystalline silicon solar cells. This project aims to address the major impediments to improved efficiency of multicrystalline silicon solar cells, the most prevalent in industry today. Three key areas have been identified: understanding the fundamental source of carrier recombination in this material, the application of plasma silicon nitride to reducing this recombination, and developing a suitable technique for texturing the front surface of the cells. By using novel, advanced techniques to gain a deeper physical understanding of these issues, it will be possible to develop new, cost-effective processes that improve efficiency and are applicable in industry.Read moreRead less
A novel approach to direct nanopatterning of silicon for advanced phase-changed devices. This project will exploit key research developments at ANU in the field of nanotechnology, specifically nanofabrication of entirely new devices. In particular, this work will be exploited by a new Australian high-tech company, WRiota, to produce novel silicon phase change devices. The instrumentation developments will be commercialized by a leading nanoindentation company and the materials and device-related ....A novel approach to direct nanopatterning of silicon for advanced phase-changed devices. This project will exploit key research developments at ANU in the field of nanotechnology, specifically nanofabrication of entirely new devices. In particular, this work will be exploited by a new Australian high-tech company, WRiota, to produce novel silicon phase change devices. The instrumentation developments will be commercialized by a leading nanoindentation company and the materials and device-related outcomes and IP will be retained and used by WRiota. This project will further provide valuable opportunities for a number of research students and ECRs to gain experience in both the industrial and academic worlds.Read moreRead less
Low temperature fabrication of silicon-based thin film transistors (TFTs) for flat panel displays - an entirely new approach. This project represents an entirely new approach to low temperature crystallization of amorphous silicon, and its application to TFT fabrication in flat panel displays, and involves a partnership with the Australian high-tech company, WRiota. The research is in a field of high national priority, namely nanotechnology, since the technology is based on materials modificati ....Low temperature fabrication of silicon-based thin film transistors (TFTs) for flat panel displays - an entirely new approach. This project represents an entirely new approach to low temperature crystallization of amorphous silicon, and its application to TFT fabrication in flat panel displays, and involves a partnership with the Australian high-tech company, WRiota. The research is in a field of high national priority, namely nanotechnology, since the technology is based on materials modification at the nanoscale by nanoindentation. This project will further provide valuable opportunities for a number of research students and ECRs to gain experience in both the industrial and academic worlds and skills needed for Australia's nanotechnology workforce.Read moreRead less
Power systems with diverse generation - implications, control and capability. This research will generate a systematic methodology to handle the impact of the renewable energy sources on the NSW power grid. It increases our understanding of the impact of climate change policies relating to mandatory targets for greenhouse gas reduction helping to build Australia’s research capacity in the national priority area of an environmentally sustainable Australia. The anticipated methodology can also be ....Power systems with diverse generation - implications, control and capability. This research will generate a systematic methodology to handle the impact of the renewable energy sources on the NSW power grid. It increases our understanding of the impact of climate change policies relating to mandatory targets for greenhouse gas reduction helping to build Australia’s research capacity in the national priority area of an environmentally sustainable Australia. The anticipated methodology can also be seen as protecting the security of power infrastructure as well. Maintaining a critical energy infrastructure protects our way of life and ensures ongoing social, economic and environmental well being of Australia.Read moreRead less
Implant Isolation of III-V Compound Semiconductor Devices and Structures. Individual devices in an integrated circuit can be electrically isolated from each other by irradiating the materials between them with high energy ions. This creates defects in the semiconductor that trap charge carriers and thereby increase the resistance of the material. However, the effectiveness of this process depends on the material as well as irradiation and post-irradiation processing conditions. This project aim ....Implant Isolation of III-V Compound Semiconductor Devices and Structures. Individual devices in an integrated circuit can be electrically isolated from each other by irradiating the materials between them with high energy ions. This creates defects in the semiconductor that trap charge carriers and thereby increase the resistance of the material. However, the effectiveness of this process depends on the material as well as irradiation and post-irradiation processing conditions. This project aims to develop an implant isolation scheme for a new class of devices developed by Epitactix, an Australian start-up company founded on CSIRO research. This will be achieved by combining the ANU's experience and expertise in ion-irradiation and defect engineering with the device and processing expertise of Epitactix Pty Ltd.Read moreRead less
The Identification and Development of Strategies for Increasing Engineering Enrolments. There is a continuing nation-wide decline in high school student enrolment in higher level mathematics and science. This is already leading to a reduction in the number of students undertaking university engineering programs in Australia and the situation is expected to worsen. This project is directed toward a better understanding of the reasons for the trend and the development of strategies to reverse it. ....The Identification and Development of Strategies for Increasing Engineering Enrolments. There is a continuing nation-wide decline in high school student enrolment in higher level mathematics and science. This is already leading to a reduction in the number of students undertaking university engineering programs in Australia and the situation is expected to worsen. This project is directed toward a better understanding of the reasons for the trend and the development of strategies to reverse it. It aims to 1. Evaluate the most effective strategies that increase student's interests and understanding of engineering and increase participation in engineering studies. 2. Develop an optimised national communication strategy for promoting engineering studies to secondary students.Read moreRead less
Advanced Sliver Solar Cells. The expected outcome of the proposed research is the development of second generation Sliver solar cell technology, encouraging large commercial impact, which would be of substantial benefit to Australia in terms of export income and employment. Origin Energy has committed >$60 million to the development and commercialisation of the first generation Sliver cell technology. Substantial further commercial investment is expected during scale-up for full scale manufactur ....Advanced Sliver Solar Cells. The expected outcome of the proposed research is the development of second generation Sliver solar cell technology, encouraging large commercial impact, which would be of substantial benefit to Australia in terms of export income and employment. Origin Energy has committed >$60 million to the development and commercialisation of the first generation Sliver cell technology. Substantial further commercial investment is expected during scale-up for full scale manufacturing.
Successful implementation of technology developed during the research will result in the displacement of fossil fuel technologies and corresponding greenhouse gas emissions reduction, assisting Government in its objective to make major cuts to greenhouse gas emissions.
Read moreRead less
Spatial sound control for testing multi-channel audio devices. Spatial sound control for testing multi-channel audio devices. This project aims to test Alternative Listening Devices/Personal Sound Amplification Devices (PSAPs), multi-input audio devices fast replacing hearing aids due to their affordability and easy accessibility. With more consumers choosing PSAPs, proper testing is needed to assess the devices’ safety and benefit in real-life acoustic situations. This project will test PSAPs i ....Spatial sound control for testing multi-channel audio devices. Spatial sound control for testing multi-channel audio devices. This project aims to test Alternative Listening Devices/Personal Sound Amplification Devices (PSAPs), multi-input audio devices fast replacing hearing aids due to their affordability and easy accessibility. With more consumers choosing PSAPs, proper testing is needed to assess the devices’ safety and benefit in real-life acoustic situations. This project will test PSAPs in laboratory setups that use spatial audio processing techniques to mimic realistic acoustic environments, and develop theoretical frameworks to overcome existing limitations to accurate spatial sound reproduction. This research is expected to provide innovative solutions to safeguard Australia's future hearing health.Read moreRead less
Tailoring the microwave dielectric properties of promising electroceramics for use in wireless telecommunication components and devices. This project aims to develop and tailor the microwave dielectric properties of promising electroceramic materials specifically targeting next generation wireless telecommunications applications. The partnership between the ANU and the Australian company Microwave and Materials Designs has the potential to enable new microwave electroceramic materials to be disc ....Tailoring the microwave dielectric properties of promising electroceramics for use in wireless telecommunication components and devices. This project aims to develop and tailor the microwave dielectric properties of promising electroceramic materials specifically targeting next generation wireless telecommunications applications. The partnership between the ANU and the Australian company Microwave and Materials Designs has the potential to enable new microwave electroceramic materials to be discovered and then incorporated into new microwave components and/or devices developed in response to the requirements of the international wireless telecommunications market. The requested PhD student will gain experience in both the industrial and academic worlds and the skills needed to be part of Australia's high-tech workforce. Read moreRead less