Development of modal control systems for adaptive optics. This project will develop a simple, robust and low-cost modal servo system for dynamic control and correction of the propagation and focussing properties of light beams. This new system will incorporate a novel optical sensor, which will be developed in this project, and a new optical corrector being developed at the University of Durham. Currently available astronomical adaptive-optics systems have produced excellent results but are expe ....Development of modal control systems for adaptive optics. This project will develop a simple, robust and low-cost modal servo system for dynamic control and correction of the propagation and focussing properties of light beams. This new system will incorporate a novel optical sensor, which will be developed in this project, and a new optical corrector being developed at the University of Durham. Currently available astronomical adaptive-optics systems have produced excellent results but are expensive and complicated. A low-cost alternative will dramatically increase the use of adaptive optics in industrial, environmental and medical applications. The compensation of distortions in low-cost optical atmospheric sensors will be demonstrated.Read moreRead less
The Development of High Power Cryo-Cooled Lasers and Their Application to Remote Sensing and Other Satelite-based Data Acquisition. We shall develop high power cryo-cooled lasers which will contribute directly to the national research priorities in Frontier Technologies and Safe Guarding Australia. In particular it will contribute to photonics, to remote sensing of the environment and to space based defence and surveillance applications. It will establish Australia as a pioneer in the field and ....The Development of High Power Cryo-Cooled Lasers and Their Application to Remote Sensing and Other Satelite-based Data Acquisition. We shall develop high power cryo-cooled lasers which will contribute directly to the national research priorities in Frontier Technologies and Safe Guarding Australia. In particular it will contribute to photonics, to remote sensing of the environment and to space based defence and surveillance applications. It will establish Australia as a pioneer in the field and generate important IP. It will be of benefit to Australian and international laser and defence industry, and it will be an ideal project for educating young laser physicists and engineers, of which there currently is a serious shortage in Australia.Read moreRead less
Short-pulse laser cleaning for Australian heritage conservation. Conserving heritage objects is a demanding discipline, requiring a suite of techniques for different problems. Overseas, laser cleaning using long pulse techniques leaves microscopic damage as discrete chunks of material are removed, and is unsuitable for many materials. We have developed a short pulse laser process which can remove material molecule-by-molecule in a controlled fashion, and which can be readily halted once the fi ....Short-pulse laser cleaning for Australian heritage conservation. Conserving heritage objects is a demanding discipline, requiring a suite of techniques for different problems. Overseas, laser cleaning using long pulse techniques leaves microscopic damage as discrete chunks of material are removed, and is unsuitable for many materials. We have developed a short pulse laser process which can remove material molecule-by-molecule in a controlled fashion, and which can be readily halted once the final finish is achieved. We will research this technique for application to unique Australian heritage materials that are important to the specific conservation needs of the Australian War Memorial, the RAAF, Navy and Army Museums, Artlab Australia, and the Art Gallery of NSW.Read moreRead less
A low-cost water vapour profiler for the lower troposphere. Water vapour plays an important role in weather forecasting, as well as being the most important greenhouse gas. Its distribution is not known in sufficient detail for many aspects of predicting weather and climate change. With the Bureau of Meteorology we will develop a low-cost laser ranging system to measure the profile of water vapour in the lower atmosphere. A low-cost instrument can be placed at a sufficient number of locations ....A low-cost water vapour profiler for the lower troposphere. Water vapour plays an important role in weather forecasting, as well as being the most important greenhouse gas. Its distribution is not known in sufficient detail for many aspects of predicting weather and climate change. With the Bureau of Meteorology we will develop a low-cost laser ranging system to measure the profile of water vapour in the lower atmosphere. A low-cost instrument can be placed at a sufficient number of locations to significantly enhance weather forecasting and climate modelling. The instrument will be useful for detecting fog formation, measuring cloudbase heights and can be adapted for pollution detection and measurement.Read moreRead less
Coherent LIDAR for Monitoring Air Pollution and Atmospheric Wind-fields. Industry, government and civil defence urgently require compact, field deployable sensors that can measure winds and monitor pollution in the atmospheric boundary layer. Without these sensors they are unable to measure and make informed decisions about windborne dispersion of industrial emissions, environmental pollutants, and chemical/biological toxins under operational conditions. The project will develop eye-safe cohere ....Coherent LIDAR for Monitoring Air Pollution and Atmospheric Wind-fields. Industry, government and civil defence urgently require compact, field deployable sensors that can measure winds and monitor pollution in the atmospheric boundary layer. Without these sensors they are unable to measure and make informed decisions about windborne dispersion of industrial emissions, environmental pollutants, and chemical/biological toxins under operational conditions. The project will develop eye-safe coherent lidar (light detection and ranging) systems that can measure wind velocities at ranges of up to 10 km with an accuracy of about 1 m/s, and can be deployed to field sites as required. The technology will be of major interest to the commercial sector.Read moreRead less
Ringed photonic crystal fibres for broadband nonlinear optics. The technology developed from this project will enable organic molecules to be detected, identified and quantified. Because the technology is compact, easily engineered and low cost, it will lead to a dramatically increased capability for infrared spectroscopic measurement throughout biology and medicine, with specific benefits in agriculture, the food industry and defence.
Evaluating modern printing inks: the behaviour of charged particles in concentrated nonaqueous colloidal dispersions. The Partner Organisation in this proposal, Research Laboratories of Australia (RLA) is a small Adelaide-based company which is at the forefront of modern colour printing technology. RLA provides liquid toners to several major international manufacturers of colour printers for use in liquid immersion development processes. This proposal will develop an instrument for characterisin ....Evaluating modern printing inks: the behaviour of charged particles in concentrated nonaqueous colloidal dispersions. The Partner Organisation in this proposal, Research Laboratories of Australia (RLA) is a small Adelaide-based company which is at the forefront of modern colour printing technology. RLA provides liquid toners to several major international manufacturers of colour printers for use in liquid immersion development processes. This proposal will develop an instrument for characterising the properties of liquid inks, enabling continual R&D improvement of RLA's products. Furthermore, the instrument can be commercialised and marketed worldwide to companies dealing with concentrated colloidal dispersions in a wide range of industries including foods, pharmaceuticals, cosmetics and surface coatings.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0989747
Funder
Australian Research Council
Funding Amount
$400,000.00
Summary
Ultrafast Dynamics Measurement Facility for the Physical, Biochemical, and Materials Sciences. The term "ultrafast revolution" describes the transformations in science due to ultrafast laser technology. Today, ultrafast lasers are used in surgery, nanomaterial fabrication, biomedical imaging, spectroscopic investigations, and new applications are still emerging. This facility will draw together leading chemists, physicists, and engineers to investigate key ultrafast processes and phenomena in th ....Ultrafast Dynamics Measurement Facility for the Physical, Biochemical, and Materials Sciences. The term "ultrafast revolution" describes the transformations in science due to ultrafast laser technology. Today, ultrafast lasers are used in surgery, nanomaterial fabrication, biomedical imaging, spectroscopic investigations, and new applications are still emerging. This facility will draw together leading chemists, physicists, and engineers to investigate key ultrafast processes and phenomena in the physical, biochemical and material sciences. This is of strategic importance to keep Australia at the global forefront for scientific endeavours, supporting new research and commercial opportunities. This facility will also produce highly trained graduates, who will find employment in industry throughout Australia and globally.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0775649
Funder
Australian Research Council
Funding Amount
$400,000.00
Summary
An Integrated Multi-Node Microfluidics Facility. The establishment of the proposed facility will enhance Australia's position in microfluidics research, thus contributing to all National Priority areas, particularly the National Priority area 3 through advancement in breakthrough science and frontier technologies. In addition to researchers from participating institutions, the Facility will be made available to other Australian researchers from non-participating organisations at minimum cost. Th ....An Integrated Multi-Node Microfluidics Facility. The establishment of the proposed facility will enhance Australia's position in microfluidics research, thus contributing to all National Priority areas, particularly the National Priority area 3 through advancement in breakthrough science and frontier technologies. In addition to researchers from participating institutions, the Facility will be made available to other Australian researchers from non-participating organisations at minimum cost. The socio-economic potentials of the research carried out using the proposed facility are significant and include: R&D development, small scale high technology manufacture, exports, and improved methods of biochemical processing and medical diagnostics.Read moreRead less