Optomechanical refrigeration of electronic circuits. The project aims to apply laser light to reduce the temperature of electronic circuits. This aims to greatly suppress electronic noise, and enable a new class of technologies for future telecommunication systems. By developing new techniques to confine light, electric fields and vibrations at sub-micron scale on a silicon chip, devices such as ultralow noise amplifiers, clocks and radio frequency receivers will be realised, along with ultra-ef ....Optomechanical refrigeration of electronic circuits. The project aims to apply laser light to reduce the temperature of electronic circuits. This aims to greatly suppress electronic noise, and enable a new class of technologies for future telecommunication systems. By developing new techniques to confine light, electric fields and vibrations at sub-micron scale on a silicon chip, devices such as ultralow noise amplifiers, clocks and radio frequency receivers will be realised, along with ultra-efficient optical modulators. In future, these technologies could reduce energy consumption and improve reliability in telecommunication networks. They could improve the range of satellite communication, robustness of GPS against cosmic radiation, and performance of surveillance systems such as radar and sonar.Read moreRead less
Optomechanical metrology: pushing optical sensing to its limit. This project aims to pioneer technologies to observe and control the microscopic world with unprecedented precision, and apply them to realise practical sensors with unrivalled performance. Nano- and micro-scale sensors will be developed that resolve motion smaller than an atomic nucleus, in a classical spin-off from international efforts to study quantum physics at the nanoscale. Record precision will be achieved in thermometry and ....Optomechanical metrology: pushing optical sensing to its limit. This project aims to pioneer technologies to observe and control the microscopic world with unprecedented precision, and apply them to realise practical sensors with unrivalled performance. Nano- and micro-scale sensors will be developed that resolve motion smaller than an atomic nucleus, in a classical spin-off from international efforts to study quantum physics at the nanoscale. Record precision will be achieved in thermometry and magnetometry. New tools will be developed for lab-on-a-chip medical diagnosis and thermal imaging, that in future could allow femtolitre diagnosis of blood diseases such as malaria, on-chip genomic analysis, more efficient airport screening, and more precise satellite maps of global and atmospheric temperature.Read moreRead less
Early-Stage Medical Diagnostics by Plasmon-Mediated Gas Sensing. This project will investigate the use plasmonic absorption of light in metal nanostructures to activate the selective oxidation/reduction of a gas molecule on a semiconductor nanoparticle. This concept will be used with the aim of developing a sensing technique capable of measuring ultra-low concentrations (ppb) of breath markers for lung cancer detection. It is expected that porous sensing films of semiconductor and metal nanopart ....Early-Stage Medical Diagnostics by Plasmon-Mediated Gas Sensing. This project will investigate the use plasmonic absorption of light in metal nanostructures to activate the selective oxidation/reduction of a gas molecule on a semiconductor nanoparticle. This concept will be used with the aim of developing a sensing technique capable of measuring ultra-low concentrations (ppb) of breath markers for lung cancer detection. It is expected that porous sensing films of semiconductor and metal nanoparticles with well-defined light absorption properties will be fabricated. Superior selectivity will be achieved by matching the wavelength of the absorbed light with the required activation energy for oxidation/reduction. Successful outcomes will enable multi-analyte fingerprint identification by on-chip devices with applications ranging from portable medical diagnostics to national security.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE190100641
Funder
Australian Research Council
Funding Amount
$422,079.00
Summary
Brillouin microscopy for high-speed imaging of rigidity within cells. This project aims to improve the sensitivity and speed of Brillouin microscopes. Brillouin microscopes use light to measure the stiffness of samples in 3D without requiring physical access, allowing their use in inaccessible locations such as the interior of cells or within intact tissue. However, Brillouin microscopes are too slow to be used in most research. This project introduces a new approach based on different optical p ....Brillouin microscopy for high-speed imaging of rigidity within cells. This project aims to improve the sensitivity and speed of Brillouin microscopes. Brillouin microscopes use light to measure the stiffness of samples in 3D without requiring physical access, allowing their use in inaccessible locations such as the interior of cells or within intact tissue. However, Brillouin microscopes are too slow to be used in most research. This project introduces a new approach based on different optical physics that is expected to enable faster and more precise imaging. The microscope will be used to study the movement of amoeba, where it is expected to reveal the controlled stiffening and fluidising of the different regions of protoplasm believed to underlie the cell mobility.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE120101721
Funder
Australian Research Council
Funding Amount
$375,000.00
Summary
Probing the excited states of organic semiconductor systems with photoinduced absorption spectroscopy. Plastic semiconductors have the potential to revolutionise consumer electronics by enabling cheap, flexible and low power devices. The success of these devices depends on our understanding of the optical and electronic properties of the materials, which this project aims to address through the use of photoinduced absorption spectroscopy.
Next generation lasers for short-reach optical fibre communication. This project aims to develop next-generation laser systems for multimode fibre-optic communication systems, by leveraging recently developed techniques for measuring and controlling the spatial properties of light. These techniques will provide new insights into the physics of the lasers themselves, as well as overcoming fundamental limitations which have traditionally hindered their operation at high speed. The expected outcome ....Next generation lasers for short-reach optical fibre communication. This project aims to develop next-generation laser systems for multimode fibre-optic communication systems, by leveraging recently developed techniques for measuring and controlling the spatial properties of light. These techniques will provide new insights into the physics of the lasers themselves, as well as overcoming fundamental limitations which have traditionally hindered their operation at high speed. The expected outcome of this project is the inclusion of these techniques in the development and operation of future generations of fibre communication systems. Creating new classes of laser systems, which can scale to large bit rates, will enable the growth in this area to be sustained into the future.Read moreRead less
Bright x-ray beams from laser-driven microplasmas. This project aims to develop a new generation of bright, laser-like x-ray sources for laboratory use. X-ray sources underpin key diagnostic techniques in materials science, advancing applications from structural engineering through to ore processing and energy storage. However, the limited brightness of present-day laboratory x-ray sources restricts the utility and range of these diagnostic techniques. This research intends to use intense lasers ....Bright x-ray beams from laser-driven microplasmas. This project aims to develop a new generation of bright, laser-like x-ray sources for laboratory use. X-ray sources underpin key diagnostic techniques in materials science, advancing applications from structural engineering through to ore processing and energy storage. However, the limited brightness of present-day laboratory x-ray sources restricts the utility and range of these diagnostic techniques. This research intends to use intense lasers to create microscopic plasmas and drive high harmonic generation. The high harmonic generation process is already used to create laser-like ultraviolet light. By optimising the characteristics of the plasma medium, the project aims to extend bright high harmonic generation to the x-ray regime.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE100100009
Funder
Australian Research Council
Funding Amount
$455,000.00
Summary
Ultra-precision cutting and polishing machines for fabricating high-Q crystalline resonators. The proposed facility will equip Australian researchers with the capability to machine and polish optical crystalline materials down to atomic-level smoothness. The availability of this technology will enable the fabrication of ultra-sensitive metrological sensors, state-of-the-art photonic components, and quantum devices. Precision metrology is an integral component of many industries and it underpins ....Ultra-precision cutting and polishing machines for fabricating high-Q crystalline resonators. The proposed facility will equip Australian researchers with the capability to machine and polish optical crystalline materials down to atomic-level smoothness. The availability of this technology will enable the fabrication of ultra-sensitive metrological sensors, state-of-the-art photonic components, and quantum devices. Precision metrology is an integral component of many industries and it underpins a modern, technically advanced society. With this facility Australian researchers will lead the world in the fabrication of optical crystalline devices for a broad range of industrial and research applications.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE210100934
Funder
Australian Research Council
Funding Amount
$439,082.00
Summary
Taming the light: full control in polarisation, space, and time. This project aims to develop two prototype optical beam shaping systems, culminating in the demonstration of new high-power optical fibre amplifiers. This novel ability to control all the properties of light enables the generation of optical beams that were only theoretical ideas but never previously implemented experimentally. This advanced technology can potentially open new ways in which objects can be probed using light. Expect ....Taming the light: full control in polarisation, space, and time. This project aims to develop two prototype optical beam shaping systems, culminating in the demonstration of new high-power optical fibre amplifiers. This novel ability to control all the properties of light enables the generation of optical beams that were only theoretical ideas but never previously implemented experimentally. This advanced technology can potentially open new ways in which objects can be probed using light. Expected outcomes include the creation of an optical platform that the optical community at large may utilise for their specific applications. Besides the intellectual property benefits of such optical devices directly, this project should bridge the gap between the developed knowledge and commercial opportunities.Read moreRead less
Control of light in space and time in multimode optical fibres. This project aims to create devices to measure and manipulate the spatial and temporal properties of light. The ability to control or measure the spatial and/or temporal properties of light is a fundamental feature of many applications, including biomedical imaging, astronomy, telecommunications, high-power lasers and quantum computing. This project will develop five prototype systems to control the spatiotemporal properties of ligh ....Control of light in space and time in multimode optical fibres. This project aims to create devices to measure and manipulate the spatial and temporal properties of light. The ability to control or measure the spatial and/or temporal properties of light is a fundamental feature of many applications, including biomedical imaging, astronomy, telecommunications, high-power lasers and quantum computing. This project will develop five prototype systems to control the spatiotemporal properties of light in ways that were previously not possible. This would affect fundamental and applied applications where the inability to sufficiently control light’s spatial and/or temporal properties is an impediment. Examples include imaging deep into ‘opaque’ objects such as human skin or brain, high-power lasers for material processing and manufacturing, optical telecommunications and quantum computation.Read moreRead less