Local scour below offshore pipelines on calcareous sediments. This project will improve predictions of erosion around subsea structures in calcareous sediment, allowing potential pipeline self-burial. This will reduce the considerable costs currently spent on pipeline stabilisation and increase the viability of Australia's offshore resources and the competitiveness of the Australian oil and gas industry.
Predicting scour and scour-induced settlement of subsea infrastructure. This project aims to develop improved predictions and understanding of the potential and extent of scour and scour-induced settlement of subsea infrastructure on mobile seabeds. This is expected to enable scour and settlement to be accounted for directly in engineering stability and serviceability design, overturning current practice which ignores both effects on the basis of using scour protection and costly maintenance and ....Predicting scour and scour-induced settlement of subsea infrastructure. This project aims to develop improved predictions and understanding of the potential and extent of scour and scour-induced settlement of subsea infrastructure on mobile seabeds. This is expected to enable scour and settlement to be accounted for directly in engineering stability and serviceability design, overturning current practice which ignores both effects on the basis of using scour protection and costly maintenance and remediation. Development of accurate predictions is expected to be achieved through physical model testing, numerical modelling and analysis of field data. Predictions should improve subsea reliability and lead to omission of scour protection in some situations, increasing international competitiveness of our offshore oil and gas industry.Read moreRead less
Longshore Sediment Supply to the Deep Ocean. The current model to supply sand to deep water off continental margins is that provided by rivers operating at low sea level. We propose an alternative model in which sand is provided by longshore transport to deep water at high sea level north of Fraser Island, SE Queensland. Here we will test the validity of our new model by site studies of sea bottom morphology, composition and dynamics. If the model proves true, we will have: 1) generated an entir ....Longshore Sediment Supply to the Deep Ocean. The current model to supply sand to deep water off continental margins is that provided by rivers operating at low sea level. We propose an alternative model in which sand is provided by longshore transport to deep water at high sea level north of Fraser Island, SE Queensland. Here we will test the validity of our new model by site studies of sea bottom morphology, composition and dynamics. If the model proves true, we will have: 1) generated an entirely new exploration model for deepwater hydrocarbons, 2) provided new expertise and seabed maps for generating a superior marine naval defence capability.Read moreRead less
Sulfur Cycling in Toxic Oozes, Microbialites and Petroleum. This project will apply compound specific sulfur isotope analyses to sulfur-rich deposits from extreme environments including sulfidic black oozes (Peel-Harvey estuary); modern microbialites (for example, Shark Bay) and oils/source rocks (established and frontier oil fields). Sulfur isotopic data, integrated with other stable isotopic and molecular data, will greatly assist the study of sulfur biogeochemical cycles and mechanisms of org ....Sulfur Cycling in Toxic Oozes, Microbialites and Petroleum. This project will apply compound specific sulfur isotope analyses to sulfur-rich deposits from extreme environments including sulfidic black oozes (Peel-Harvey estuary); modern microbialites (for example, Shark Bay) and oils/source rocks (established and frontier oil fields). Sulfur isotopic data, integrated with other stable isotopic and molecular data, will greatly assist the study of sulfur biogeochemical cycles and mechanisms of organic sulfurisation at different diagenetic stages or geological ages. The project aims to address national concerns through measuring the respective impact of anthropogenic and natural changes on environments, helping to understand the evolution of life on Earth and contributing to efficient discovery of our natural petroleum systems.Read moreRead less
Novel multiple-constraint model for green buildings and life-cycle analyses. This project aims to develop a multiple-constraint automation model to perform life-cycle analyses for projects in the Australian construction industry. The model will optimise construction methods for green-building implementation and offer a realistic approach to Green-star status achievement. The Life-cycle model analyses for cost, greenhouse-gas emissions and energy consumption allowing the construction methods to b ....Novel multiple-constraint model for green buildings and life-cycle analyses. This project aims to develop a multiple-constraint automation model to perform life-cycle analyses for projects in the Australian construction industry. The model will optimise construction methods for green-building implementation and offer a realistic approach to Green-star status achievement. The Life-cycle model analyses for cost, greenhouse-gas emissions and energy consumption allowing the construction methods to be optimised for minimum environmental impact. Utilisation of the model should significantly shape an organisations’ strategic planning, while a recognised high Green-star status from Green Building Council of Australia will improve their reputation and bring benefits to the construction industry.Read moreRead less
Quantification of Multiphysics phenomena of Gas flow in organic rich shales. We address the scientific question of the nature of gas extraction from nominally impermeable rocks such as shales. Our main aim is to develop a fully coupled microstructurally enriched thermodynamic continuum model to predict the Multiphysics behaviour of shale reservoirs during gas production and verify the model with representative experiments conducted on formations from three Australian Basins including Cooper, Per ....Quantification of Multiphysics phenomena of Gas flow in organic rich shales. We address the scientific question of the nature of gas extraction from nominally impermeable rocks such as shales. Our main aim is to develop a fully coupled microstructurally enriched thermodynamic continuum model to predict the Multiphysics behaviour of shale reservoirs during gas production and verify the model with representative experiments conducted on formations from three Australian Basins including Cooper, Perth and Beetaloo, where the samples are available to the investigators. We approach this problem in a hybrid theoretical-numerical-experimental study. This is the first international attempt to develop such experimentally verified thermodynamic based model, particularly for Australian shales.Read moreRead less
Modelling and testing corroding reinforced concrete structures. The project aims to develop models and methods to enable the early detection of active steel corrosion. Most of Australia’s critical infrastructure is located on or near the coast in high saline conditions and is exposed to a high risk of reinforcing steel corrosion. Our ability to design and monitor such structures is crucial. The first part of the project aims to develop an innovative finite element model to improve the prediction ....Modelling and testing corroding reinforced concrete structures. The project aims to develop models and methods to enable the early detection of active steel corrosion. Most of Australia’s critical infrastructure is located on or near the coast in high saline conditions and is exposed to a high risk of reinforcing steel corrosion. Our ability to design and monitor such structures is crucial. The first part of the project aims to develop an innovative finite element model to improve the prediction of both active steel reinforcement corrosion and the time to concrete cracking in a chloride environment. It then plans to develop a non-destructive method, combining ultrasonic waves-based technology and acoustic emission, to detect active steel corrosion before any damage is visible on the structure.Read moreRead less
Using immersive virtual reality to enhance students’ science visualisation. This project aims to investigate the potential of advanced visualisation technology, immersive virtual reality, as a collaborative learning environment to support students to explore their ideas and learn a core chemistry concept, molecular structures and functions. Incorporating both data analytics and qualitative video analysis, the project will establish a deep understanding of how students learn about the molecular w ....Using immersive virtual reality to enhance students’ science visualisation. This project aims to investigate the potential of advanced visualisation technology, immersive virtual reality, as a collaborative learning environment to support students to explore their ideas and learn a core chemistry concept, molecular structures and functions. Incorporating both data analytics and qualitative video analysis, the project will establish a deep understanding of how students learn about the molecular world within an immersive virtual reality environment in relation to the learners’ experience, chemistry content, visual representations, learning tasks, and design features. The project will recommend evidence-driven design considerations for learning resources development and further educational research with advanced technologies.Read moreRead less
The online future of Science and Engineering education: The essential elements of laboratory-based learning for remote-access implementation. Laboratory classes are a critical part of science and engineering degree programs, but there has been little research into what actually takes place within them. Remote laboratories, in which students control equipment via the internet, are one potential solution for accommodating rising numbers of students, but the interfaces must be developed to effectiv ....The online future of Science and Engineering education: The essential elements of laboratory-based learning for remote-access implementation. Laboratory classes are a critical part of science and engineering degree programs, but there has been little research into what actually takes place within them. Remote laboratories, in which students control equipment via the internet, are one potential solution for accommodating rising numbers of students, but the interfaces must be developed to effectively support student learning. This project will investigate how students interact with equipment, each other, and with laboratory demonstrators in order to determine the crucial components of effective laboratory learning experiences. It will identify and characterise the interactions of students in laboratory classes, and develop mechanisms to support these interactions remotely.Read moreRead less
Engaging Students during the Early Years of Secondary School. This project aims to design, test and share sustainable strategies to support teachers and enable students from low socioeconomic communities to achieve success. The greatest decreases in students’ interest and effort occur when they transition into secondary school, with students from low socioeconomic communities at greatest risk of disengagement. What can teachers do to engage their students during this key life transition? This pr ....Engaging Students during the Early Years of Secondary School. This project aims to design, test and share sustainable strategies to support teachers and enable students from low socioeconomic communities to achieve success. The greatest decreases in students’ interest and effort occur when they transition into secondary school, with students from low socioeconomic communities at greatest risk of disengagement. What can teachers do to engage their students during this key life transition? This project plans to identify teacher behaviours that motivate students in their first year at secondary school. Using an experimental design with a representative sample of 150 teachers and 1500 students in low socioeconomic areas across three states, the project plans to test whether an online professional learning program for teachers can improve student engagement and achievement. This cost-effective and scalable intervention is designed for widespread dissemination to Australian teachers.Read moreRead less