Photonic Antenna: Nested multi-band patch antenna and arrayed photonic interconnect. This project aims to investigate the design of a broadband ?photonic antenna? for airborne radar warning and electronic countermeasure systems. The project will investigate the development of a suite of printed antennas that cover bands in the range from 2-40 GHz realised on a single substrate. Nesting these antennas to reduce system size, and integration of this module with a custom optical modulator array and ....Photonic Antenna: Nested multi-band patch antenna and arrayed photonic interconnect. This project aims to investigate the design of a broadband ?photonic antenna? for airborne radar warning and electronic countermeasure systems. The project will investigate the development of a suite of printed antennas that cover bands in the range from 2-40 GHz realised on a single substrate. Nesting these antennas to reduce system size, and integration of this module with a custom optical modulator array and RF signal combiner will be investigated. The resulting broadband antenna suite with photonic interconnect will require minimal fabrication and packaging resources, and will thus be an economically viable photonic solution for practical defence systems.Read moreRead less
NOVEL MICROWAVE TECHNOLOGIES AND DESIGN TECHNIQUES FOR MULTILAYER CIRCUITS FOR WIRELESS COMMUNICATIONS. Miniaturization of mobile handsets and other wireless equipment is limited by the slow progress in integrating passive elements. Two novel technologies Low Temperature Co-fired Ceramics (LTCC) and Micro Electro Mechanical Systems (MEMS) offer the capacity to significantly miniaturise RF and microwave circuits and increase their efficiency and capabilities. The proposal deals with development o ....NOVEL MICROWAVE TECHNOLOGIES AND DESIGN TECHNIQUES FOR MULTILAYER CIRCUITS FOR WIRELESS COMMUNICATIONS. Miniaturization of mobile handsets and other wireless equipment is limited by the slow progress in integrating passive elements. Two novel technologies Low Temperature Co-fired Ceramics (LTCC) and Micro Electro Mechanical Systems (MEMS) offer the capacity to significantly miniaturise RF and microwave circuits and increase their efficiency and capabilities. The proposal deals with development of novel microwave technologies and techniques for optimization, characterization, simulation, design and fabrication of advanced LTCC materials and LTCC and MEMS based miniaturized circuits for 3G and beyond of Wireless Communication. The outcomes of the project will be of significant benefit to the Australian Telecommunications industry.Read moreRead less
Integrated Microwave-Photonic Subsystems for Antenna Remoting Applications in Defence and Wireless Communications. Millimetre-wave frequency bands are being explored for defence applications that provide better surveillance and detection electronic warfare capabilities. Microwave-photonic systems which integrate microwave and millimetre-wave electronic warfare capabilities with broadband photonic networking have been widely recognised as one of the crucial technologies to the development of new ....Integrated Microwave-Photonic Subsystems for Antenna Remoting Applications in Defence and Wireless Communications. Millimetre-wave frequency bands are being explored for defence applications that provide better surveillance and detection electronic warfare capabilities. Microwave-photonic systems which integrate microwave and millimetre-wave electronic warfare capabilities with broadband photonic networking have been widely recognised as one of the crucial technologies to the development of new capabilities in current and next generation defence platforms. This project is focused on implementing advanced system integration approaches to the design, development and implementation of microwave-photonic sub-systems and resilient optical feeder network architectures. The outcomes of this project will also influence the development of broadband wireless access solutions.Read moreRead less
Printable Multi-Bit Radio Frequency Identification for Banknotes. This project will investigate inexpensive radio-frequency transponders on banknotes that enjoy all of the advantages of, and, indeed, operate in a manner somewhat similar to barcodes. Transponders of this type may potentially replace barcode technology, thereby allowing automated identification of individual banknotes at multiple points in transaction chains. The resulting efficiencies in banknote authentication and other applic ....Printable Multi-Bit Radio Frequency Identification for Banknotes. This project will investigate inexpensive radio-frequency transponders on banknotes that enjoy all of the advantages of, and, indeed, operate in a manner somewhat similar to barcodes. Transponders of this type may potentially replace barcode technology, thereby allowing automated identification of individual banknotes at multiple points in transaction chains. The resulting efficiencies in banknote authentication and other applications will generate a significant economic benefit for Australia. Additionally, the development of state-of-the-art transponders based on fundamental microwave- and antenna engineering prospectively gives Australia a cutting-edge advantage as a leading player in the fast-growing RFID market.Read moreRead less
Chipless RFID for Barcode Replacement. This project will investigate inexpensive radio-frequency transponders that enjoy all of the advantages of, and, indeed, operate in a manner somewhat similar to barcodes. Transponders of this type may potentially replace barcode technology, thereby allowing automated identification of individual items at multiple points in supply- and distribution chains. The resulting efficiencies in a host of logistic and other applications will generate a significant e ....Chipless RFID for Barcode Replacement. This project will investigate inexpensive radio-frequency transponders that enjoy all of the advantages of, and, indeed, operate in a manner somewhat similar to barcodes. Transponders of this type may potentially replace barcode technology, thereby allowing automated identification of individual items at multiple points in supply- and distribution chains. The resulting efficiencies in a host of logistic and other applications will generate a significant economic benefit for Australia. Additionally, the development of state-of-the-art transponders based on fundamental microwave- and antenna engineering prospectively gives Australia a cutting-edge advantage as a leading player in the fast-growing RFID market.Read moreRead less
Back-scatter based Radio Freqency IDentification (RFID) system capable of reading multiple chipless tags for regional and suburban libraries. Australia has the highest rate of library usage among the developed countries. However, only a few libraries in Australia use RFID based library management system. The main hindrance is the cost of the tag compared to the optical barcode. The project addresses the problem by offer a smart RFID reader which can read multiple chipless RFID tags. The results ....Back-scatter based Radio Freqency IDentification (RFID) system capable of reading multiple chipless tags for regional and suburban libraries. Australia has the highest rate of library usage among the developed countries. However, only a few libraries in Australia use RFID based library management system. The main hindrance is the cost of the tag compared to the optical barcode. The project addresses the problem by offer a smart RFID reader which can read multiple chipless RFID tags. The results of the project will bring Australia on a cutting edge technology and serving the community better with state-of-the-art RFID based library management system. Also export of the technology will put Australia in the forefront of the RFID applications.Read moreRead less
Barium Strontium Titanate Thin Films for Tunable Microwave Applications. Australian businesses rely on information and communications technologies (ICT) in order to remain competitive in the global economy. Over the last decade or so, ICT has also found applications in consumer devices, many of which are wireless. This has lead to strong growth in the market for such technologies. Barium strontium titanate (BST) devices can be used to enhance the efficiency and lower the cost of radio frequency ....Barium Strontium Titanate Thin Films for Tunable Microwave Applications. Australian businesses rely on information and communications technologies (ICT) in order to remain competitive in the global economy. Over the last decade or so, ICT has also found applications in consumer devices, many of which are wireless. This has lead to strong growth in the market for such technologies. Barium strontium titanate (BST) devices can be used to enhance the efficiency and lower the cost of radio frequency devices to make wireless technology more accessible for the Australian community. Additionally, BST devices can be applied for frequency agile applications, which are invaluable for the Australian defence sector.Read moreRead less
Special Research Initiatives - Grant ID: SR0354527
Funder
Australian Research Council
Funding Amount
$10,000.00
Summary
Frontier technologies, prototypes and strategic positioning for the international radio telescope, the Square Kilometre Array. This Network will forge new linkages between scientists and engineers to design and enable an advanced prototype for the international next-generation radio telescope, the Square Kilometre Array (SKA). The prototype will make fundamental new tests of general relativity and the physics of dark energy and test SKA imaging and signal processing systems. The Network partners ....Frontier technologies, prototypes and strategic positioning for the international radio telescope, the Square Kilometre Array. This Network will forge new linkages between scientists and engineers to design and enable an advanced prototype for the international next-generation radio telescope, the Square Kilometre Array (SKA). The prototype will make fundamental new tests of general relativity and the physics of dark energy and test SKA imaging and signal processing systems. The Network partners will collaborate to develop low-cost technologies for ultra-wideband antennas, high-speed signal processing, software radios, mitigation of man-made interference and the handling of petabyte data sets. The aim is a leading role for Australian researchers and industry in the $2 billion SKA.Read moreRead less
Model-Reduction Techniques for Control, Communication and Circuits. Model reduction is an important area of study in the analysis and design of dynamical systems. Its objective is to obtain a low-order model given a high-order system model such that the low-order model closely approximates the input-output behaviour of the original high-order system. Although theory and application of model reduction is well developed, there are many unresolved issues such as efficient model reduction techniq ....Model-Reduction Techniques for Control, Communication and Circuits. Model reduction is an important area of study in the analysis and design of dynamical systems. Its objective is to obtain a low-order model given a high-order system model such that the low-order model closely approximates the input-output behaviour of the original high-order system. Although theory and application of model reduction is well developed, there are many unresolved issues such as efficient model reduction techniques for large-scale circuit simulation and communication applications, frequency-weighted model reduction techniques for controller-design applications, and error bounds for the reduction techniques. The project aims to address these issues.Read moreRead less
Development of a new wideband feed for a cylindrical reflector antenna. The aim of this project is to design and build a wideband feed to operate at the line focus of a cylindrical reflector antenna, over the frequency range 300 MHz to 1500 MHz. The development of a low cost wideband feed will give Argus Technologies a competitive edge in the expanding telecommunications industry because they will have a single device that will satisfy many specialist antenna requirements, which can be economic ....Development of a new wideband feed for a cylindrical reflector antenna. The aim of this project is to design and build a wideband feed to operate at the line focus of a cylindrical reflector antenna, over the frequency range 300 MHz to 1500 MHz. The development of a low cost wideband feed will give Argus Technologies a competitive edge in the expanding telecommunications industry because they will have a single device that will satisfy many specialist antenna requirements, which can be economically manufactured. There will also be potential application for this array in radar and navigation systems and for the next generation radio telescope, the Square Kilometre Array.Read moreRead less