Industrial Transformation Training Centres - Grant ID: IC160100036
Funder
Australian Research Council
Funding Amount
$4,881,754.00
Summary
ARC Training Centre in Alloy Innovation for Mining Efficiency. ARC Training Centre in Alloy Innovation for Mining Efficiency. This centre aims to make Australian manufacturers dominant in the multi-billion dollar mining equipment sector by training innovators to design the world’s best highly customized long-life, wear resistant components. It intends to rapidly develop customized alloys that excel in severe mining conditions, using three-dimensional printing, novel characterisation and its netw ....ARC Training Centre in Alloy Innovation for Mining Efficiency. ARC Training Centre in Alloy Innovation for Mining Efficiency. This centre aims to make Australian manufacturers dominant in the multi-billion dollar mining equipment sector by training innovators to design the world’s best highly customized long-life, wear resistant components. It intends to rapidly develop customized alloys that excel in severe mining conditions, using three-dimensional printing, novel characterisation and its networked training environment. It expects these innovations will enable much needed efficiencies after the end of the mining super-cycle. Anticipated outcomes are the design of products with superior alloy design and material selection; jobs growth and security in the mining component production sector; and increased mining efficiency and cost reduction.Read moreRead less
Development of novel high performance aluminium alloys containing scandium. Development of novel high performance aluminium alloys containing scandium. This project aims to develop a new generation of aerospace aluminium alloys containing scandium. Over 30 million tonnes of high performance aluminium alloys are produced annually. Early investigations showed many beneficial effects of scandium on alloy behaviour, but research was abandoned due to scandium’s high cost. Australia has the largest de ....Development of novel high performance aluminium alloys containing scandium. Development of novel high performance aluminium alloys containing scandium. This project aims to develop a new generation of aerospace aluminium alloys containing scandium. Over 30 million tonnes of high performance aluminium alloys are produced annually. Early investigations showed many beneficial effects of scandium on alloy behaviour, but research was abandoned due to scandium’s high cost. Australia has the largest deposit of scandium in the world, and Australian sustainable extraction technology will markedly lower the price. This project believes that now is an ideal time to capitalise scandium’s beneficial effects and be at the forefront of this new alloy development strategy. Anticipated outcomes are the creation of a new market with economic and sustainable opportunities for the Australian mining sector.Read moreRead less
Harnessing properties of liquid metals for future devices. This project aims to hybridise low toxicity liquid metal alloys of gallium with surface confined functional micro/nano materials and explore fundamental new fluidic and physical-chemistry phenomena. Liquid metals are an under-used group of materials, but their combination of flexibility, bestowed by their room temperature fluidity, and metallic properties means they demonstrate startling behaviour. The expected outcomes are new devices a ....Harnessing properties of liquid metals for future devices. This project aims to hybridise low toxicity liquid metal alloys of gallium with surface confined functional micro/nano materials and explore fundamental new fluidic and physical-chemistry phenomena. Liquid metals are an under-used group of materials, but their combination of flexibility, bestowed by their room temperature fluidity, and metallic properties means they demonstrate startling behaviour. The expected outcomes are new devices and systems such as reconfigurable and highly efficient actuators/generators, catalysts, sensors, and electronic and optical components.Read moreRead less
A Mechanistic Approach to the Compression Properties of Z-Pinned Composites. The proposed research is a fundamental investigation of the compressive mechanical properties and failure mechanisms of fibre reinforced polymer (FRP) composites reinforced with z-pins. These composites are a new material with strong potential applications in aerospace structures subject to high compressive loads, however their compressive properties are poorly understood. Using theoretical modelling, finite element an ....A Mechanistic Approach to the Compression Properties of Z-Pinned Composites. The proposed research is a fundamental investigation of the compressive mechanical properties and failure mechanisms of fibre reinforced polymer (FRP) composites reinforced with z-pins. These composites are a new material with strong potential applications in aerospace structures subject to high compressive loads, however their compressive properties are poorly understood. Using theoretical modelling, finite element analysis and experimentation, the research program will greatly enhance the fundamental understanding of the strengthening and failure mechanisms of z-pinned composites. A key outcome of the research will be design guidelines for optimising the pinning of composites for maximum structural performance in aerospace applications.Read moreRead less
DEVELOPMENT OF SCIENTIFIC AND EXPERIMENTAL BASIS FOR MANUFACTURE OF BUILDING MATERIALS WITH SPECIAL PROPERTIES BASED ON GEOPOLYMERS. This project seeks to develop a new class of building materials based on geopolymers. These materials will have superior corrosion resistance, fire resistance, heat and noise insulating properties. The project will study in detail the effect of processing parameters on microstructure of these materials, and effect of structure and composition on properties. A good ....DEVELOPMENT OF SCIENTIFIC AND EXPERIMENTAL BASIS FOR MANUFACTURE OF BUILDING MATERIALS WITH SPECIAL PROPERTIES BASED ON GEOPOLYMERS. This project seeks to develop a new class of building materials based on geopolymers. These materials will have superior corrosion resistance, fire resistance, heat and noise insulating properties. The project will study in detail the effect of processing parameters on microstructure of these materials, and effect of structure and composition on properties. A good understanding of this would result in environmentally friendly inexpensive inorganic materials with superior durability, chemical and fire resistance, heat and noise insulation properties that can substitute organic polymers and ordinary Portland cement concrete in special applications.Read moreRead less
Prediction of Time-dependent Deformations in Post-tensioned Concrete Suspended Slabs in Tall Buildings. The proposed project aims to develop an analytical model that can predict the time-dependent deformations in post-tensioned concrete slabs considering concrete shrinkage and creep, cracking, and bond-slip behaviour. Over the past several years, numerous cases have been reported in Australia and elsewhere, of flexural elements for which the calculated deflection is far less than the actual defl ....Prediction of Time-dependent Deformations in Post-tensioned Concrete Suspended Slabs in Tall Buildings. The proposed project aims to develop an analytical model that can predict the time-dependent deformations in post-tensioned concrete slabs considering concrete shrinkage and creep, cracking, and bond-slip behaviour. Over the past several years, numerous cases have been reported in Australia and elsewhere, of flexural elements for which the calculated deflection is far less than the actual deflection leading to serviceability problems. The significance of this investigation hence lies in its potential to provide a solution to more accurately predict service-life deflections in post-tensioned concrete suspended slabs and validate the model with real-life deflections monitored over time on a current building project.Read moreRead less
Australian Laureate Fellowships - Grant ID: FL180100053
Funder
Australian Research Council
Funding Amount
$3,162,000.00
Summary
Re-discovering liquid metals from core to surface. This project aims to investigate and make new discoveries on the unique properties of liquid metals. Liquid metals have traditionally been used in mining, for switches, barometers, heat transfer units, and coolers and heaters. However, recent discoveries have indicated that liquid metals have untapped potential in applications for creating systems with extraordinary physical and chemical properties. This project will expand our knowledge of liqu ....Re-discovering liquid metals from core to surface. This project aims to investigate and make new discoveries on the unique properties of liquid metals. Liquid metals have traditionally been used in mining, for switches, barometers, heat transfer units, and coolers and heaters. However, recent discoveries have indicated that liquid metals have untapped potential in applications for creating systems with extraordinary physical and chemical properties. This project will expand our knowledge of liquid metals by exploring liquid metals as electron rich solvents and investigating new properties to develop future applications in electronics, optics, catalysts, thermal devices and bio systems.Read moreRead less
Cold catalysis for water splitting. This project aims to develop photocatalysts via AC magnetic field through nanoscale heating for efficient H2 generation. This project is to introduce cold catalysis concept, which heats catalysts only but not solution, thus called cold catalysis, in the area of production of renewable energy. Expected outcome is the creation of clean and low cost catalysts to effectively harvest the chemical energy from the sun via splitting of water into H2 and O2 without cau ....Cold catalysis for water splitting. This project aims to develop photocatalysts via AC magnetic field through nanoscale heating for efficient H2 generation. This project is to introduce cold catalysis concept, which heats catalysts only but not solution, thus called cold catalysis, in the area of production of renewable energy. Expected outcome is the creation of clean and low cost catalysts to effectively harvest the chemical energy from the sun via splitting of water into H2 and O2 without causing any environmental damage. This unique technology will also help to address clean energy generation, which is in line with H2 economy plan by Australia government, and provide opportunities for new industries that will benefit Australian economy.Read moreRead less
Integrated composite electrodes for electrochemical synthesis of ammonia. This project aims to develop multifunctional composite electrodes for electrochemical synthesis of ammonia from water, nitrogen gas and renewable energy under ambient conditions. Hydrophobic subnanometre water channels will be integrated with an electrocatalyst to control supply of water as vapour, thereby effectively minimising hydrogen evolution reaction and enabling high-efficiency ammonia synthesis. Expected outcomes i ....Integrated composite electrodes for electrochemical synthesis of ammonia. This project aims to develop multifunctional composite electrodes for electrochemical synthesis of ammonia from water, nitrogen gas and renewable energy under ambient conditions. Hydrophobic subnanometre water channels will be integrated with an electrocatalyst to control supply of water as vapour, thereby effectively minimising hydrogen evolution reaction and enabling high-efficiency ammonia synthesis. Expected outcomes include enhanced capacity in developing electrochemical reaction systems, and new fundamental knowledge of electrocatalyst design and reaction engineering. This should provide significant economic and environmental benefits by developing a sustainable manufacturing technology to transform the century-old ammonia industry.Read moreRead less
Developing new, water-based lubricants for sheet metal forming. There is increasing pressure on manufacturers, including the sheet metal forming industry, to use less toxic, water-based lubricants with a number of common additives being banned or being phased out internationally. In the case of automotive manufacturers, this is combined with demand for alternative sheet materials to reduce costs or cater for export markets. Efficient development of new lubricants or replacement additives require ....Developing new, water-based lubricants for sheet metal forming. There is increasing pressure on manufacturers, including the sheet metal forming industry, to use less toxic, water-based lubricants with a number of common additives being banned or being phased out internationally. In the case of automotive manufacturers, this is combined with demand for alternative sheet materials to reduce costs or cater for export markets. Efficient development of new lubricants or replacement additives requires a comprehensive understanding of the interactions between lubricant components and the surface of the sheet metal. This project will explore and model these interactions and how they are affected by the variables in a metal forming process.Read moreRead less