Imaging the invisible. This project aims to develop imaging technology to see and quantify objects normally invisible with X-rays. It will develop an X-ray imaging system that should provide orders of magnitude greater sensitivity to subtle changes in material composition than conventional radiography. It will devise quantitative image analysis tools for isolating specific materials of interest from complex multi-material samples, including low density components that often go undetected. Indust ....Imaging the invisible. This project aims to develop imaging technology to see and quantify objects normally invisible with X-rays. It will develop an X-ray imaging system that should provide orders of magnitude greater sensitivity to subtle changes in material composition than conventional radiography. It will devise quantitative image analysis tools for isolating specific materials of interest from complex multi-material samples, including low density components that often go undetected. Industries that could benefit significantly from this technology include airport security, the mining sector, agriculture, manufacturing quality control, and biomedical researchers studying anatomical form and function.Read moreRead less
Non-destructing X-ray testing. This project aims to improve imaging with X-rays, providing better image quality with higher throughput at a lower radiation dose. It will develop an X-ray imaging system that provides orders of magnitude greater sensitivity for detecting low-density objects that are often invisible with conventional X-ray scanners, and quantitative image analysis tools that can isolate materials from complex multi-material samples and detect individual chemical elements. Significa ....Non-destructing X-ray testing. This project aims to improve imaging with X-rays, providing better image quality with higher throughput at a lower radiation dose. It will develop an X-ray imaging system that provides orders of magnitude greater sensitivity for detecting low-density objects that are often invisible with conventional X-ray scanners, and quantitative image analysis tools that can isolate materials from complex multi-material samples and detect individual chemical elements. Significant benefits from these technologies are expected in industries including airport security, mining, agriculture, manufacturing quality control, and in research fields from medicine to geology.Read moreRead less
Dynamic multi-modal x-ray imaging. This project aims to create sensitive new methods of x-ray imaging that capture multiple image modalities with a single snapshot. Conventional x-ray imaging is widely used in a range of industries, but captures only a fraction of the rich information that is available in the x-ray wavefield. This project expects to extract additional image modalities to reveal x-ray-transparent features, and detect microscopic textures. By combining these capabilities with the ....Dynamic multi-modal x-ray imaging. This project aims to create sensitive new methods of x-ray imaging that capture multiple image modalities with a single snapshot. Conventional x-ray imaging is widely used in a range of industries, but captures only a fraction of the rich information that is available in the x-ray wavefield. This project expects to extract additional image modalities to reveal x-ray-transparent features, and detect microscopic textures. By combining these capabilities with the ability to capture images of a moving sample, this project will enable innovative biomedical and materials research studies, and develop new imaging technologies for use in security, hospitals and manufacturing. New methods of x-ray imaging will have wide-ranging benefits for society, the economy and healthcare.Read moreRead less
New quantitative methods in X-ray imaging using crystal optics. This project will enhance Australian science's international leadership in the area of x-ray imaging. This powerful type of X-ray imaging, which makes use of optical elements made of perfect crystals, is specially tailored to image samples which are invisible to conventional x-ray techniques. Such "extended x-ray vision" is extremely important for imaging in medicine, biology and materials science. Furthermore, we will train x-ray s ....New quantitative methods in X-ray imaging using crystal optics. This project will enhance Australian science's international leadership in the area of x-ray imaging. This powerful type of X-ray imaging, which makes use of optical elements made of perfect crystals, is specially tailored to image samples which are invisible to conventional x-ray techniques. Such "extended x-ray vision" is extremely important for imaging in medicine, biology and materials science. Furthermore, we will train x-ray scientists of tomorrow, whose expertise will allow Australia to capitalize on its investment in the Australian Synchrotron.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE220101402
Funder
Australian Research Council
Funding Amount
$415,000.00
Summary
Multi-scale, multi-modal X-ray imaging using speckle. This project aims to develop new X-ray imaging methods that capture multiple next-generation image modalities at an unprecedented range of length and time scales. While conventional X-ray imaging is routinely used in medicine and industry, it can only visualise high-density materials like bone. To reveal low-density objects like biological soft tissue and microstructure like tiny cracks, the project plans to extract two complementary image mo ....Multi-scale, multi-modal X-ray imaging using speckle. This project aims to develop new X-ray imaging methods that capture multiple next-generation image modalities at an unprecedented range of length and time scales. While conventional X-ray imaging is routinely used in medicine and industry, it can only visualise high-density materials like bone. To reveal low-density objects like biological soft tissue and microstructure like tiny cracks, the project plans to extract two complementary image modalities using a robust setup that does not rely on large-scale facilities. Significant benefits from the developed methods are expected for leading-edge research in fields including biomedicine, materials science and palaeontology, and industries such as security, medical diagnostics and manufacturing.Read moreRead less
Multiphoton microscopy through tissue turbid media. The aim of this proposal is to conduct the collaborative project on multi-photon microscopic imaging through biological tissue, which has been recently initiated between Swinburne University of Technology (SUT) and Massachusetts Institute of Technology (MIT). It will integrate the special skills, two-photon fluorescence endoscopy and second-harmonic coherence tomography, investigated in the respective collaborating institutes, to develop a nove ....Multiphoton microscopy through tissue turbid media. The aim of this proposal is to conduct the collaborative project on multi-photon microscopic imaging through biological tissue, which has been recently initiated between Swinburne University of Technology (SUT) and Massachusetts Institute of Technology (MIT). It will integrate the special skills, two-photon fluorescence endoscopy and second-harmonic coherence tomography, investigated in the respective collaborating institutes, to develop a novel method for detecting/imaging cancer cells that are located at 1 mm below tissue surfaces, while they are still in the early stage to be cured. Consequently, a diagnostic method for early cancer detection particularly through skin tissue becomes possible.Read moreRead less
Functional nonlinear optical endoscopy - the third-generation optical endoscopy technology toward early cancer detection at a cellular level. The third-generation optical endoscopy technology can be used for a better understanding of nonlinear optical interaction with organ sites and thus for early cancer detection. Such a novel device will enable biomedical scientists to gain the fundamental knowledge needed to enable Australians to develop better medical strategies for health and productive li ....Functional nonlinear optical endoscopy - the third-generation optical endoscopy technology toward early cancer detection at a cellular level. The third-generation optical endoscopy technology can be used for a better understanding of nonlinear optical interaction with organ sites and thus for early cancer detection. Such a novel device will enable biomedical scientists to gain the fundamental knowledge needed to enable Australians to develop better medical strategies for health and productive lives. Since 1 in 3 Australians will feel the effects of cancers, development of portable nonlinear optical endoscopes is of national importance, in particular for rural Australia, and therefore improves the healthcare of human beings. The potential spin-off activity will lead to economic benefits from new R&D development.Read moreRead less
Insight from Darkness: Nanophotonics for real-time phase imaging. This project aims to develop ultrathin surfaces patterned on the nanoscale for extracting information from optical wavefields. These devices can be designed to provide real-time phase contrast imaging of transparent objects. This capability would open up the possibility of live-cell imaging with no expensive optical components and no, or minimal, computational post-processing. The planar configuration is designed to be compatible ....Insight from Darkness: Nanophotonics for real-time phase imaging. This project aims to develop ultrathin surfaces patterned on the nanoscale for extracting information from optical wavefields. These devices can be designed to provide real-time phase contrast imaging of transparent objects. This capability would open up the possibility of live-cell imaging with no expensive optical components and no, or minimal, computational post-processing. The planar configuration is designed to be compatible with next-generation lab-on-a-chip technologies and permit rapid throughput diagnostics with potential applications in biomedicine and materials science. Expected project outcomes may also underpin fundamental advances in understanding the interaction of light with nanostructures.Read moreRead less
Generalized imaging systems incorporating hybrid hardware-software optics. Fundamental optics research underpins the commercial optical technologies of tomorrow. Modern examples of such evolution, from the fundamental to the commercial, include lasers, LED traffic lights, thin-screen computer monitors and digital cameras. The recent advent of accessible powerful computers, together with recent advances in optical physics, promise a powerful merging of computing and optical technologies into so ....Generalized imaging systems incorporating hybrid hardware-software optics. Fundamental optics research underpins the commercial optical technologies of tomorrow. Modern examples of such evolution, from the fundamental to the commercial, include lasers, LED traffic lights, thin-screen computer monitors and digital cameras. The recent advent of accessible powerful computers, together with recent advances in optical physics, promise a powerful merging of computing and optical technologies into so-called virtual optical systems in which the computer processes optical information in a manner very similar to lenses. In particular, the computer may be used to decode distorted images provided by an imperfect imaging system. Read moreRead less
Advanced X-ray Optical Systems: From innovative idea to intelligent implementation. This project combines advances made in x-ray optics by the x-ray physics group at the University of Melbourne with sophisticated microfabrication techniques developed at Swinburne University of Technology and at the Argonne National Laboratory synchrotron. This fusion gives us immediate access into a major space science initiative - an x-ray telescope for the International Space Station. At the same time we will ....Advanced X-ray Optical Systems: From innovative idea to intelligent implementation. This project combines advances made in x-ray optics by the x-ray physics group at the University of Melbourne with sophisticated microfabrication techniques developed at Swinburne University of Technology and at the Argonne National Laboratory synchrotron. This fusion gives us immediate access into a major space science initiative - an x-ray telescope for the International Space Station. At the same time we will be building a kernel of excellence, based on new approaches to x-ray imaging, that will be strategically placed to become an integral part of the development of experimental facilities for the Australian Synchrotron.Read moreRead less