Reducing wear on rotary coal pulverisers. The aim of this project is to develop an understanding of the small-scale flows and particle breakage required to permit optimised redesign of the attrition stage of the 36 coal pulverisers at Gladstone Power Station, which, because of erosive wear, currently have a maintenance budget of $4M per year. CFD-DEM simulation of the air and particle flows will be used to determine particle flow patterns, particle-particle and particle-wall impact energies. Thi ....Reducing wear on rotary coal pulverisers. The aim of this project is to develop an understanding of the small-scale flows and particle breakage required to permit optimised redesign of the attrition stage of the 36 coal pulverisers at Gladstone Power Station, which, because of erosive wear, currently have a maintenance budget of $4M per year. CFD-DEM simulation of the air and particle flows will be used to determine particle flow patterns, particle-particle and particle-wall impact energies. This information will be input to comminution and wear models to predict pulveriser performance and wear patterns. Simulation results will be validated using measurements from scale visualisation and working models.Read moreRead less
Modelling of Slug Pneumatic Conveying with an In-situ Microprobe Sensor. This project aims to develop a particle-scale microprobe to capture the transient dynamics of particle behaviours for pneumatic conveying. Slug flow pneumatic transport of granular materials such as mineral particles and food grains is extremely popular across the processing industry. However, without the fundamental understanding of the conveying mechanism at the particulate level, pneumatic conveyors are over-designed and ....Modelling of Slug Pneumatic Conveying with an In-situ Microprobe Sensor. This project aims to develop a particle-scale microprobe to capture the transient dynamics of particle behaviours for pneumatic conveying. Slug flow pneumatic transport of granular materials such as mineral particles and food grains is extremely popular across the processing industry. However, without the fundamental understanding of the conveying mechanism at the particulate level, pneumatic conveyors are over-designed and energy intensive. The project aims to enable accurate measurement of the motion, inertia and force information at the particle scale, so as to produce more accurate design protocols for such a conveying system. Improved pneumatic conveyors may have the potential to reduce the energy consumption in such systems by up to a factor of 10.Read moreRead less
Modelling and characterisation of biomass materials for pneumatic transport. This project aims to develop a particle scale microprobe to capture the transient dynamics of biomass compaction, dilation and associated airflow for pneumatic conveying and potentially beyond. Low velocity, dense phase pneumatic transport presents the ideal method for transporting delicate biomass feedstocks. However, without the fundamental understanding of the compactive and dilative response of biomass ensembles, pn ....Modelling and characterisation of biomass materials for pneumatic transport. This project aims to develop a particle scale microprobe to capture the transient dynamics of biomass compaction, dilation and associated airflow for pneumatic conveying and potentially beyond. Low velocity, dense phase pneumatic transport presents the ideal method for transporting delicate biomass feedstocks. However, without the fundamental understanding of the compactive and dilative response of biomass ensembles, pneumatic conveyors will be over-designed and energy intensive. This project will enable accurate measurement of the motion, inertia and force information at the particle scale, to produce more accurate design protocols for dense phase biomass pneumatic transport.Read moreRead less
Wet granule mechanics and their influence on agglomeration behaviour and granulation processes. Granulation is a widely-used particle size enlargement process performed by spraying a liquid binder onto an agitated powder mass. It is currently impossible to quantitatively predict granule growth behaviour in terms of the fundamental properties of the particles and binder. This project will measure and model the deformation of granules and the strength of bonds formed between them and use this info ....Wet granule mechanics and their influence on agglomeration behaviour and granulation processes. Granulation is a widely-used particle size enlargement process performed by spraying a liquid binder onto an agitated powder mass. It is currently impossible to quantitatively predict granule growth behaviour in terms of the fundamental properties of the particles and binder. This project will measure and model the deformation of granules and the strength of bonds formed between them and use this information to predict their growth behaviour. Special attention will be given to the effects of strain-rate and particle morphology in granulation mechanics. Improvements in granulation technology will be of great benefit to food, pharmaceutical, agricultural, explosives and mining industries and opens the way to 'designer granulation' for special purposes.Read moreRead less
Sustainable molecular and chemical engineering of stimuli-responsive soft materials. Detergents, made from non-renewable resources, are used everywhere to control foam stability; this research will deliver new detergents that are both sustainable and stimuli-responsive, meaning that foam can be switched on and off as needed. The technology will have global impact including in key Australian industries such as food and mining.
Interfacial Barriers to Transport in Nanomaterials. This project aims to make ground-breaking advances in the modelling of transport in disordered nanoporous materials by uncovering the interfacial barriers that are critical to the entry and exit of molecules from their nanostructure. The expected outcome is an efficient new simulation tool to simultaneously quantify interfacial transport resistances and system size-dependent internal transport coefficients. This is intended to be achieved throu ....Interfacial Barriers to Transport in Nanomaterials. This project aims to make ground-breaking advances in the modelling of transport in disordered nanoporous materials by uncovering the interfacial barriers that are critical to the entry and exit of molecules from their nanostructure. The expected outcome is an efficient new simulation tool to simultaneously quantify interfacial transport resistances and system size-dependent internal transport coefficients. This is intended to be achieved through simulations and experiments on the adsorption and dynamics of targeted gases in carbons with distinctly different nanostructures, enabling the optimal design of a wide range of emerging nanotechnologies for membrane separations, kinetic molecular sieving, catalysis, and gas and electrochemical energy storage.Read moreRead less
Engineering floating liquid marbles for three-dimensional cell cultures. This project aims to understand the physics of three-dimensional cell cultures in a liquid marble floating on a liquid free surface. New methodology developed can produce these cell cultures without using matrices or scaffolds and with run-times well beyond existing technologies. This methodology closely mimics a normal in-vivo environment and produces spheroids needed in cell transplantation therapies. This project will re ....Engineering floating liquid marbles for three-dimensional cell cultures. This project aims to understand the physics of three-dimensional cell cultures in a liquid marble floating on a liquid free surface. New methodology developed can produce these cell cultures without using matrices or scaffolds and with run-times well beyond existing technologies. This methodology closely mimics a normal in-vivo environment and produces spheroids needed in cell transplantation therapies. This project will resolve uncertainties in the underlying phenomena. The expected outcome should support future high quality cell cultures suitable for transplantation therapies.Read moreRead less
Role of Reactive Particles in Explosive Emulsions. Concentrated water-in oil explosive emulsions are widely used in the minerals industry because they are cheap, easily detonated and relatively safe to handle. Their explosive energy can be significantly increased when reactive particles are introduced into the emulsion matrix. To do this, the interaction between the solid, oil, and water phases needs to be optimised. This investigation will increase our basic understanding of the physical and ch ....Role of Reactive Particles in Explosive Emulsions. Concentrated water-in oil explosive emulsions are widely used in the minerals industry because they are cheap, easily detonated and relatively safe to handle. Their explosive energy can be significantly increased when reactive particles are introduced into the emulsion matrix. To do this, the interaction between the solid, oil, and water phases needs to be optimised. This investigation will increase our basic understanding of the physical and chemical interactions that occur between the particle and the oil-water interface, and develop a more efficient explosive that can be produced continuously on a commercial scale.Read moreRead less
Vaporization of heavier gas oil in Fluid Catalytic Cracking risers. Fluid Catalytic Cracking (FCC) is an important refinery operation responsible for about 45 per cent of the total petrol produced. The project is aimed at improving production efficiency of Australian refineries by applying fundamental modelling to the FCC. The outcomes will enable refiners to produce cleaner fuel and decrease greenhouse gas emissions.
The Effect of Fines Particles on Production and Permeability of cbm Reservoirs. Coalbed methane (cbm) energy resources in Australia exceed $20b in value. One of the production issues with recovering cbm is fines that are created or exist in the coal, which block gas flow to the recovery wells and damage downstream equipment. Understanding how fines are created and migrate within gas wells and then overcoming this problem, the purpose of this research, could deliver additional gas production wort ....The Effect of Fines Particles on Production and Permeability of cbm Reservoirs. Coalbed methane (cbm) energy resources in Australia exceed $20b in value. One of the production issues with recovering cbm is fines that are created or exist in the coal, which block gas flow to the recovery wells and damage downstream equipment. Understanding how fines are created and migrate within gas wells and then overcoming this problem, the purpose of this research, could deliver additional gas production worth over $1.8billion and reduce maintenance costs related to cbm extraction by $25m per year.Read moreRead less