A new paradigm in near-net-shape advanced ceramic component processing. The raw materials for high performance ceramics (such as alumina and zirconia) are readily available and produced in Australia. Nearly all of these raw materials are exported. The development of processing to make high value added ceramic components from these raw materials will result in greater profit and more jobs for Australians. The proposed research is to develop a novel innovative process to drive a value adding ce ....A new paradigm in near-net-shape advanced ceramic component processing. The raw materials for high performance ceramics (such as alumina and zirconia) are readily available and produced in Australia. Nearly all of these raw materials are exported. The development of processing to make high value added ceramic components from these raw materials will result in greater profit and more jobs for Australians. The proposed research is to develop a novel innovative process to drive a value adding ceramic processing industry in Australia.Read moreRead less
Geopolymers for nuclear applications. With the pressing need for the reduction of Greenhouse emissions from electricity generation in Australia, one option that must be seriously considered is nuclear energy. However, the issue of waste storage is a highly significant one that must be addressed. Geopolymeric cements are expected to perform much better than traditional Portland cements in nuclear applications, both for solidification of radioactive wastes and also for the construction of undergro ....Geopolymers for nuclear applications. With the pressing need for the reduction of Greenhouse emissions from electricity generation in Australia, one option that must be seriously considered is nuclear energy. However, the issue of waste storage is a highly significant one that must be addressed. Geopolymeric cements are expected to perform much better than traditional Portland cements in nuclear applications, both for solidification of radioactive wastes and also for the construction of underground waste storage bunkers. This project will use Australia's strong existing knowledge in geopolymers research, and apply it to the development of materials to fill the need for environmentally secure waste storage solutions.Read moreRead less
Highly efficient electric power and value-added synthesis gas co-generation from methane with zero greenhouse gas emission. This project addresses a novel sealing-free solid oxide fuel cell system producing simultaneously synthesis gas and electricity from methane with zero greenhouse gas emission. The project aims to deliver economic benefits and contribute to environmental protection and increased employment opportunities.
Crystalline Mesoporous Metal Oxides for Solid Oxide Fuel Cell Electrodes. Our crystalline mesoporous electrodes will help realise the full potentials of solid oxide fuel cells. Such advanced fuel cell technology will drastically increase the power generation efficiency, and reduce CO2 emissions from present power plants, thereby transforming Australian energy industry and improving our environment. The design and development of novel crystalline mesoporous materials that find widespread industri ....Crystalline Mesoporous Metal Oxides for Solid Oxide Fuel Cell Electrodes. Our crystalline mesoporous electrodes will help realise the full potentials of solid oxide fuel cells. Such advanced fuel cell technology will drastically increase the power generation efficiency, and reduce CO2 emissions from present power plants, thereby transforming Australian energy industry and improving our environment. The design and development of novel crystalline mesoporous materials that find widespread industrial applications will advance Australia's knowledge and skill base, and help Australia's high-tech industries to stay competitive, including the development of new high-tech industries in Australia.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0989123
Funder
Australian Research Council
Funding Amount
$575,000.00
Summary
Spark Plasma Sintering (SPS) Facility for Advanced Materials Processing. The establishment of the first Spark Plasma Sintering (SPS) facility would significantly enhance Australia's capacity in manufacturing of advanced materials, especially the more sophisticated and specialized materials, which is a National Research Priority. This facility will benefit a large number of researchers and projects in Australia's premier research organisations and will also meet the needs of organisations outside ....Spark Plasma Sintering (SPS) Facility for Advanced Materials Processing. The establishment of the first Spark Plasma Sintering (SPS) facility would significantly enhance Australia's capacity in manufacturing of advanced materials, especially the more sophisticated and specialized materials, which is a National Research Priority. This facility will benefit a large number of researchers and projects in Australia's premier research organisations and will also meet the needs of organisations outside the consortium. It will allow Australian researchers to remain at the leading edge of research and enhance collaborations in advanced materials nationwide. The successful outcomes of these activities will underpin the advancement in many areas of research and technology developments in the country.Read moreRead less
Controlling Anisotropic Growth of Metal Oxide Crystals in Aqueous Solution by Selective Adsorption of Small Molecules. The proposed research will enhance our ability to make both light emitting diodes (LEDs) and piezoelectric actuators from ZnO. LEDs are a high efficiency light source that save energy compared to conventional illumination sources and can be fabricated in thin films. The proposal is to also bring the technology for device fabrication to Australia where it can ultimately be used ....Controlling Anisotropic Growth of Metal Oxide Crystals in Aqueous Solution by Selective Adsorption of Small Molecules. The proposed research will enhance our ability to make both light emitting diodes (LEDs) and piezoelectric actuators from ZnO. LEDs are a high efficiency light source that save energy compared to conventional illumination sources and can be fabricated in thin films. The proposal is to also bring the technology for device fabrication to Australia where it can ultimately be used to broaden the economic base of the country. The knowledge of crystal growth rate and crystal morphology control can be applied to improvements in the efficiency of alumina production which is already an important contributor to Australian exports.Read moreRead less
Wet Particulate Materials - Flow or Fracture? Most advanced materials are produced from starting materials in the form of fine particles. Powders, especially in ceramic engineering, are first processed wet into near-final shape. Improved understanding of the fracture of particle networks is critical in order to process nano-sized advanced ceramic materials for use in solar energy harvesting and extreme heat engine applications as well as minimising drying cracks in paints and coatings. The resea ....Wet Particulate Materials - Flow or Fracture? Most advanced materials are produced from starting materials in the form of fine particles. Powders, especially in ceramic engineering, are first processed wet into near-final shape. Improved understanding of the fracture of particle networks is critical in order to process nano-sized advanced ceramic materials for use in solar energy harvesting and extreme heat engine applications as well as minimising drying cracks in paints and coatings. The research aims to identify the fundamental link between particle network strength and structure and the fracture of wet powder bodies. The microscopic mechanisms that control the behaviour will be investigated with a particular focus on toughening mechanisms including the influence of plasticity.Read moreRead less
PROCESSING OF REDUCED-BAND-GAP TITANIA FOR SOLAR-HYDROGEN. The present project involves the development of materials and devices for solar-hydrogen using photo-assisted water decomposition. The research focusses on the processing of titanium dioxide (titania) with substantially enhanced photo-sensitivity and, consequently, increased efficiency of the conversion of solar energy into chemical energy (hydrogen) through imposition of the optimal Ti/O ratio. Significance: processing technology of tit ....PROCESSING OF REDUCED-BAND-GAP TITANIA FOR SOLAR-HYDROGEN. The present project involves the development of materials and devices for solar-hydrogen using photo-assisted water decomposition. The research focusses on the processing of titanium dioxide (titania) with substantially enhanced photo-sensitivity and, consequently, increased efficiency of the conversion of solar energy into chemical energy (hydrogen) through imposition of the optimal Ti/O ratio. Significance: processing technology of titania for photo-electrochemical devices for hydrogen generation and water decontamination. Innovation: processing of titania with reduced band-gap to be achieved through optimised oxygen nonstoichiometry. Outcome: processing technology of titania with outstanding photo-sensitivity.Read moreRead less
New Nanoscale Up-converting Photoluminescent Materials for Passive Safety Visual Systems. The demand for safety and security products is growing as the importance of providing an environment safer from natural, accidental or man-made threats increases in the community. Life safety applications in buildings and work environments as well as trains and planes for example are dependent upon the ability for non-powered passive systems to give efficient visual guidance in dangerous dark and smoke fill ....New Nanoscale Up-converting Photoluminescent Materials for Passive Safety Visual Systems. The demand for safety and security products is growing as the importance of providing an environment safer from natural, accidental or man-made threats increases in the community. Life safety applications in buildings and work environments as well as trains and planes for example are dependent upon the ability for non-powered passive systems to give efficient visual guidance in dangerous dark and smoke filled environments. This project will provide a practical demonstration of the successful implementation of nanotechnology to smaller Australian companies where it will overcome significant drawbacks in current manufacturing and yield new products which are activated in darkness by infrared radiation.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE160100054
Funder
Australian Research Council
Funding Amount
$750,000.00
Summary
High Temperature Atomic Structure and Physical Property Analysis Facility. High temperature atomic structure and physical property analysis facility:
The aim of this project is to strengthen Australian research activities in the development of advanced materials for novel multifunctional devices, sensors, catalysts, engineering components and energy technologies through the purchase of a state-of-the-art high temperature atomic structure and physical property analysis facility. The facility is ....High Temperature Atomic Structure and Physical Property Analysis Facility. High temperature atomic structure and physical property analysis facility:
The aim of this project is to strengthen Australian research activities in the development of advanced materials for novel multifunctional devices, sensors, catalysts, engineering components and energy technologies through the purchase of a state-of-the-art high temperature atomic structure and physical property analysis facility. The facility is designed to consist of a high temperature scanning tunnelling microscope and a high temperature AC field hall effect measurement system to form a powerful and versatile high temperature atomic structure and physical property analysis facility. This is expected to provide a unique research capability in in-situ analysis of atomic and electronic behaviours with the correlated physical properties including carrier concentration and mobility at temperatures exceeding 1300 K. Read moreRead less