Novel electric field induced coupling technique for liquid-phase heteroepitaxial growth of carbon thin films with diamond-like structure. The aim of the project is the growth of carbon thin films with a robust diamond-like structure for high performance electronic applications via the development of a new growth technique: Electric Field Induced Coupling (EFIC), which is based on liquid-phase layer-by-layer heteroepitaxial growth. The EFIC technique employing unique polarization-induced growth w ....Novel electric field induced coupling technique for liquid-phase heteroepitaxial growth of carbon thin films with diamond-like structure. The aim of the project is the growth of carbon thin films with a robust diamond-like structure for high performance electronic applications via the development of a new growth technique: Electric Field Induced Coupling (EFIC), which is based on liquid-phase layer-by-layer heteroepitaxial growth. The EFIC technique employing unique polarization-induced growth will significantly enhance technological output compared to existing technologies by overcoming current difficulties with expensive and complicated production methods. Ambient temperatures and pressures employed by the technique will enable us to form diamond-based semiconductors at low cost with sufficient speed and the properties required for industrial production.
Read moreRead less
Paper fluidics - A novel approach to low cost printable microsensors. Printing is perhaps the cheapest means of mass production available, yet it is used almost exclusively to mass produce only one thing, i.e. the printed word! This project will enable the development of disposable printed sensors for assessing the quality of water or the health of an individual. Sensors are generally relatively expensive, but the ability to print them on paper by the thousand will bring down the cost to a few ....Paper fluidics - A novel approach to low cost printable microsensors. Printing is perhaps the cheapest means of mass production available, yet it is used almost exclusively to mass produce only one thing, i.e. the printed word! This project will enable the development of disposable printed sensors for assessing the quality of water or the health of an individual. Sensors are generally relatively expensive, but the ability to print them on paper by the thousand will bring down the cost to a few cents. Such cheap, portable, easy-to-use sensors if widely available could profoundly affect the lives of people living in remote areas and developing countries.Read moreRead less
Field-Enhanced Electrospinning for Fine and Uniform Nanofibres. This project will result in a new platform technology to produce very fine and uniform nanofibres that can be used in a range of advanced applications. It will further strengthen our leading position in the field of nanofibre technology, and contribute to the National Research Priority area of Frontier Technologies for Building and Transforming Australian Industries. Australia already has niche expertise in nanomaterials. This proje ....Field-Enhanced Electrospinning for Fine and Uniform Nanofibres. This project will result in a new platform technology to produce very fine and uniform nanofibres that can be used in a range of advanced applications. It will further strengthen our leading position in the field of nanofibre technology, and contribute to the National Research Priority area of Frontier Technologies for Building and Transforming Australian Industries. Australia already has niche expertise in nanomaterials. This project will significantly enhance our international standing in the field. There is a growing list of local companies that are interested in exploring the production and application of nanofibrous materials also.Read moreRead less
NOVEL Fe-Cr OXIDE AND SKELETAL (RANEY) CATALYSTS FOR WATER GAS SHIFT REACTION. The water gas shift reaction has an importance implication in the control of carbon monoxide/hydrogen ratios of gas mixtures used during the synthesis of methanol, diesel and hydrogen. The research study aims to develop and characterise Fe-Cr oxide and chromia-promoted Raney Cu catalysts for water gas shift reaction using a tube wall reactor. The catalyst fabrication is based on leaching and electrochemical deposition ....NOVEL Fe-Cr OXIDE AND SKELETAL (RANEY) CATALYSTS FOR WATER GAS SHIFT REACTION. The water gas shift reaction has an importance implication in the control of carbon monoxide/hydrogen ratios of gas mixtures used during the synthesis of methanol, diesel and hydrogen. The research study aims to develop and characterise Fe-Cr oxide and chromia-promoted Raney Cu catalysts for water gas shift reaction using a tube wall reactor. The catalyst fabrication is based on leaching and electrochemical deposition to promote the catalytic activity. The produced catalysts will be characterised and tested for catalytic activity, temperature stability and other physical properties to determine fundamental understanding for future commercial applications.Read moreRead less
Investigation of Strategies to Improve the Efficiency of Industrial Radiators and Cooling Coils. Innovative strategies for improving in-service effectiveness of tube & plate-fin heat exchange 'coils' will be explored. Such coils are used throughout chemical process industries, diesel powered plant, vehicles and air-conditioning systems. Coil manufacture is a 'mature' industry, but design concepts have changed little since 1950. Fouling of diesel engine 'radiators' in dusty conditions and in mari ....Investigation of Strategies to Improve the Efficiency of Industrial Radiators and Cooling Coils. Innovative strategies for improving in-service effectiveness of tube & plate-fin heat exchange 'coils' will be explored. Such coils are used throughout chemical process industries, diesel powered plant, vehicles and air-conditioning systems. Coil manufacture is a 'mature' industry, but design concepts have changed little since 1950. Fouling of diesel engine 'radiators' in dusty conditions and in marine environments is endemic. New design concepts evolved via Computational Fluid Dynamic analysis will be manufactured and tested in the unique heat and mass transfer wind tunnel on the University's Industry Liaison Campus. The major outcome will be a rugged design methodology with broad applicability.Read moreRead less
Study of hydrocarbon flames under heat and gas recirculation conditions. This project aims to study gaseous flames under heat and gas recirculation conditions. This technology has been proven to reduce fuel consumption, improve thermal efficiency and substantially reduce nitric oxides emission. The effect of mixing, turbulence and temperature on the structure and stability of these flames will be investigated. The project combines experimental and computational research applied to a laboratory s ....Study of hydrocarbon flames under heat and gas recirculation conditions. This project aims to study gaseous flames under heat and gas recirculation conditions. This technology has been proven to reduce fuel consumption, improve thermal efficiency and substantially reduce nitric oxides emission. The effect of mixing, turbulence and temperature on the structure and stability of these flames will be investigated. The project combines experimental and computational research applied to a laboratory scale burner and a small scale furnace. The main objectives are to better understand the chemical pathways in low temperature hydrocarbon flames under heat and gas recirculation conditions and to understand the effect of mixing and turbulence on the flame structure and pollutants emission.Read moreRead less
Mathematical and mechanical models in nano-engineering and nanomedicine. The major environmental problems generated from global warming and the major human health problems, like cancer and diabetes, if they are to be solved at all, will most likely be resolved making use of advances in nanobiotechnology. This proposal will position Australia as a leader in the modelling of nanodevices such as gigahertz oscillators, nano-electromagnets, nanosensors, nanosyringes and nanoporous media suitable for ....Mathematical and mechanical models in nano-engineering and nanomedicine. The major environmental problems generated from global warming and the major human health problems, like cancer and diabetes, if they are to be solved at all, will most likely be resolved making use of advances in nanobiotechnology. This proposal will position Australia as a leader in the modelling of nanodevices such as gigahertz oscillators, nano-electromagnets, nanosensors, nanosyringes and nanoporous media suitable for hydrogen storage and gas separation, which will lead to new technologies and commercial spin-offs that will be of major benefit to this country. The applicants will develop a range of topics in nano-engineering and nanomedicine, training a team that will provide the next generation of researchers in these vital areas.Read moreRead less
Modelling of Adsorption Dynamics in Microporous Adsorbents Using Fractional Order Diffusion Equations. This project investigates the use of fractional order diffusion equations in modelling adsorption dynamics in microporous carbons. The long tail behaviour of adsorption processes cannot be readily explained by the classical second order Fickian model, and makes adsorption a candidate for the use of fractional order diffusion equations that have the potential to model such features. In the pre ....Modelling of Adsorption Dynamics in Microporous Adsorbents Using Fractional Order Diffusion Equations. This project investigates the use of fractional order diffusion equations in modelling adsorption dynamics in microporous carbons. The long tail behaviour of adsorption processes cannot be readily explained by the classical second order Fickian model, and makes adsorption a candidate for the use of fractional order diffusion equations that have the potential to model such features. In the present project we shall develop suitable numerical techniques for solving the fractional order diffusion model, and apply these to the interpretation of experimental kinetic data. The outcome will be an improved model of adsorption dynamics considering the fractal nature of the solid.Read moreRead less
Investigation and Prediction of the Novel Properties of Dendrimers. Dendrimers are a new class of highly branched polymers, which have, until now, been difficult to characterise by conventional means. This project will develop and apply molecular simulation techniques to reveal the chemical and physical properties of dendrimers and their interactions with other molecules. These novel molecules potentially have beneficial applications to areas such as drug delivery and electronic materials. Th ....Investigation and Prediction of the Novel Properties of Dendrimers. Dendrimers are a new class of highly branched polymers, which have, until now, been difficult to characterise by conventional means. This project will develop and apply molecular simulation techniques to reveal the chemical and physical properties of dendrimers and their interactions with other molecules. These novel molecules potentially have beneficial applications to areas such as drug delivery and electronic materials. The outcome of this work will assist in the exploitation of this beneficial application and will provide the basis for efficient processing.Read moreRead less
Tailoring the microwave dielectric properties of promising electroceramics for use in wireless telecommunication components and devices. This project aims to develop and tailor the microwave dielectric properties of promising electroceramic materials specifically targeting next generation wireless telecommunications applications. The partnership between the ANU and the Australian company Microwave and Materials Designs has the potential to enable new microwave electroceramic materials to be disc ....Tailoring the microwave dielectric properties of promising electroceramics for use in wireless telecommunication components and devices. This project aims to develop and tailor the microwave dielectric properties of promising electroceramic materials specifically targeting next generation wireless telecommunications applications. The partnership between the ANU and the Australian company Microwave and Materials Designs has the potential to enable new microwave electroceramic materials to be discovered and then incorporated into new microwave components and/or devices developed in response to the requirements of the international wireless telecommunications market. The requested PhD student will gain experience in both the industrial and academic worlds and the skills needed to be part of Australia's high-tech workforce. Read moreRead less