Wearable thermoelectric textiles for portable microelectronics. Wearable thermoelectrics enable the power generation from the temperature difference between human body and ambient temperature by using thermoelectric effect. This project aims to design eco-friendly wearable thermoelectric textiles to realize high-efficiency solid-state power generation and meet individual needs with human comfort and health. The target is to achieve a power density in the as-designed thermoelectric textiles by th ....Wearable thermoelectric textiles for portable microelectronics. Wearable thermoelectrics enable the power generation from the temperature difference between human body and ambient temperature by using thermoelectric effect. This project aims to design eco-friendly wearable thermoelectric textiles to realize high-efficiency solid-state power generation and meet individual needs with human comfort and health. The target is to achieve a power density in the as-designed thermoelectric textiles by the optimization of materials and device design. The outcome will open up a new platform for the green and sustainable charge for portable microelectronics, which will lead to an innovative technology for energy management, which will place Australia at the forefront of wearable electronics and textile industry.Read moreRead less
Reinforced crumbed rubber concrete for residential construction. Reinforced crumbed rubber concrete for residential construction. This project aims to use crumb rubber from used tyres to replace natural sand aggregate in concrete used in housing construction. Globally, very few of the millions of tyres discarded annually are recycled, while natural sand used in concrete is being depleted. This project intends to provide the tyre industry with a viable market for end of life tyres, and the premix ....Reinforced crumbed rubber concrete for residential construction. Reinforced crumbed rubber concrete for residential construction. This project aims to use crumb rubber from used tyres to replace natural sand aggregate in concrete used in housing construction. Globally, very few of the millions of tyres discarded annually are recycled, while natural sand used in concrete is being depleted. This project intends to provide the tyre industry with a viable market for end of life tyres, and the premix concrete industry with a “green” product for the residential construction market. Expected benefits include the increased use of a waste resource (used tyres), reduced use of a scarce natural resource (sand), and the development of an economic but green alternative concrete option for residential builders and owners.Read moreRead less
Development of Viable Geopolymer. This project aims to improve the manufacture of geopolymer. Geopolymer (‘green cement’) is produced by alkali activation of fly ash and is a sustainable, low carbon dioxide alternative to conventional cement. Evaluation of raw materials and ensuring reliable performance are critical issues in geopolymer manufacture. The project aims to understand the geopolymerisation process and the behaviour of fly ash and activator in the process. It plans to establish a reac ....Development of Viable Geopolymer. This project aims to improve the manufacture of geopolymer. Geopolymer (‘green cement’) is produced by alkali activation of fly ash and is a sustainable, low carbon dioxide alternative to conventional cement. Evaluation of raw materials and ensuring reliable performance are critical issues in geopolymer manufacture. The project aims to understand the geopolymerisation process and the behaviour of fly ash and activator in the process. It plans to establish a reactivity index to quantitatively evaluate fly ash and match it with activator to achieve efficient activation with predictable properties. The project is expected to result in a scientific tool to assess fly ash suitability and a method to design and produce viable geopolymers.Read moreRead less
AM of MAX Phase parts for applications in extreme environments. This project aims to develop techniques to synthesize MAX Phase compound materials in-situ using laser additive manufacturing. The project expects to increase jet engine fuel efficiency and thrust, and to fabricate longer-lasting parts for supersonic speed applications. The expected outcomes include well-developed additive manufacturing processes to make high performance engineering components with shape complexity for extreme envir ....AM of MAX Phase parts for applications in extreme environments. This project aims to develop techniques to synthesize MAX Phase compound materials in-situ using laser additive manufacturing. The project expects to increase jet engine fuel efficiency and thrust, and to fabricate longer-lasting parts for supersonic speed applications. The expected outcomes include well-developed additive manufacturing processes to make high performance engineering components with shape complexity for extreme environment applications, and new methods to increase the 3D printability of brittle materials. This should provide significant benefits to aerospace and defense industries through solving their long standing bottleneck material and processing problems. The outcomes also enhance Australia’s manufacturing capacity.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE140100003
Funder
Australian Research Council
Funding Amount
$280,000.00
Summary
Flexible forming facility for low cost light weight applications. Flexible forming facility for low-cost light-weight applications: This project will establish Australia’s first flexible roll forming facility. The facility will be unique in the world, being specifically designed to roll form the most advanced high strength alloys into complex three-dimensional shapes and investigate their material behaviour under a wide range of loading conditions. This technology represents a step change in com ....Flexible forming facility for low cost light weight applications. Flexible forming facility for low-cost light-weight applications: This project will establish Australia’s first flexible roll forming facility. The facility will be unique in the world, being specifically designed to roll form the most advanced high strength alloys into complex three-dimensional shapes and investigate their material behaviour under a wide range of loading conditions. This technology represents a step change in commercial processing and has the capacity to form materials with high strength and limited ductility. This will lead to the development of new techniques for the manufacture of new advanced materials including advanced high strength steels, composites, nano structured metals and light metal alloys for automotive and aerospace applications.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE200100174
Funder
Australian Research Council
Funding Amount
$425,000.00
Summary
X-Ray Nanolithography Facility: Towards the ultimate resolution. This Project aims to address the need for precise and scalable nanoscale fabrication by establishing a synchrotron-based X-Ray Nanolithography Facility. This Project expects to generate new knowledge in the areas of advanced manufacturing and nanotechnology using an innovative approach that combines coherent lithography and coherent imaging metrology. Expected outcomes of this project include an internationally unique, nationally ....X-Ray Nanolithography Facility: Towards the ultimate resolution. This Project aims to address the need for precise and scalable nanoscale fabrication by establishing a synchrotron-based X-Ray Nanolithography Facility. This Project expects to generate new knowledge in the areas of advanced manufacturing and nanotechnology using an innovative approach that combines coherent lithography and coherent imaging metrology. Expected outcomes of this project include an internationally unique, nationally accessible capability for manufacturing at the nanoscale and for industry-driven collaborative research. This should provide significant benefits across fields that aim to harness the unique properties of engineered nanomaterials to greatly enhance the technologies required to solve global challenges.Read moreRead less
Industrial Transformation Research Hubs - Grant ID: IH220100012
Funder
Australian Research Council
Funding Amount
$5,000,000.00
Summary
ARC Research Hub for Carbon Utilisation and Recycling. This Research Hub aims to develop technologies to transform carbon dioxide emissions from our energy and manufacturing sectors into valuable products and create pathways to market to drive industry transformation. This hub aims to achieve this by developing novel electro, thermo, and biochemical methods for converting CO2 from sectors that cannot easily avoid emissions and a technological pathway for CO2 recycling. The outcomes of this Hub a ....ARC Research Hub for Carbon Utilisation and Recycling. This Research Hub aims to develop technologies to transform carbon dioxide emissions from our energy and manufacturing sectors into valuable products and create pathways to market to drive industry transformation. This hub aims to achieve this by developing novel electro, thermo, and biochemical methods for converting CO2 from sectors that cannot easily avoid emissions and a technological pathway for CO2 recycling. The outcomes of this Hub are likely to be transformative for industry, the economy, and society in moving the fate of CO2 from pollutant to feedstock. The benefits to Australia are intended to be the stimulation of a new industry, a skilled workforce for this emerging industry and a contribution to meeting CO2 reduction targets.Read moreRead less
Design of tuneable microstructures for additive manufacturing. The project intends to develop methods to tune the microstructure of materials in additive manufacturing so that components can be manufactured with maximum productivity and properties. Additive manufacturing is leading the mass customisation of manufacturing. Designed tunable microstructures enable structure and properties to be tailored for specific applications. One of the greatest challenges, however, is how to control the scale ....Design of tuneable microstructures for additive manufacturing. The project intends to develop methods to tune the microstructure of materials in additive manufacturing so that components can be manufactured with maximum productivity and properties. Additive manufacturing is leading the mass customisation of manufacturing. Designed tunable microstructures enable structure and properties to be tailored for specific applications. One of the greatest challenges, however, is how to control the scale and morphology of the microstructure. This project aims to use the interdependence model of grain refinement to control and design grain sizes. The project first plans to investigate the near-rapid solidification conditions in aluminium alloys. It then plans to re-design the harder-to-manufacture titanium alloys to improve grain size control.Read moreRead less
Industrial Transformation Training Centres - Grant ID: IC180100005
Funder
Australian Research Council
Funding Amount
$4,889,410.00
Summary
ARC Training Centre in Surface Engineering for Advanced Materials. The ARC Training Centre in Surface Engineering for Advanced Materials aims to provide pathways for job creation and a high quality workforce in manufacturing. Surface engineering for advanced materials is a core need in all manufacturing sectors and controls the efficiency, productivity and sustainability of Australian industry. This Centre will integrate industry-university cooperation for applied training within an industrial s ....ARC Training Centre in Surface Engineering for Advanced Materials. The ARC Training Centre in Surface Engineering for Advanced Materials aims to provide pathways for job creation and a high quality workforce in manufacturing. Surface engineering for advanced materials is a core need in all manufacturing sectors and controls the efficiency, productivity and sustainability of Australian industry. This Centre will integrate industry-university cooperation for applied training within an industrial setting and will cover a spectrum of applications ranging from thin films to thick coatings and additive layered materials. The Centre will pursue outcomes that are reflected in terms of industry-fit researchers and deliver commercial benefits for industry.Read moreRead less
Industrial Transformation Training Centres - Grant ID: IC220100012
Funder
Australian Research Council
Funding Amount
$4,939,486.00
Summary
ARC Training Centre for Advanced Building Systems Against Airborne Infection Transmission. The aim of the Centre is to engineer building systems whose elements work together to reduce airborne infection transmission by improving indoor air quality while maintaining comfort and efficiency. The significance is in establishing clean indoor air as the norm, with Australian industry being the forerunner in this process. The outcomes include new intelligent building systems, improved building technolo ....ARC Training Centre for Advanced Building Systems Against Airborne Infection Transmission. The aim of the Centre is to engineer building systems whose elements work together to reduce airborne infection transmission by improving indoor air quality while maintaining comfort and efficiency. The significance is in establishing clean indoor air as the norm, with Australian industry being the forerunner in this process. The outcomes include new intelligent building systems, improved building technologies, quantitative methods for building control, evidence for policymaking and recommendations for operational guidelines. Wide-ranging benefits include reducing the health and economic burden of inadequate indoor air and increasing the competitiveness of Australian industry in the face of increasing demand for next-level building systems.Read moreRead less